shinano: Rework qcom.power init

- Boot phone in interactive mode instead of performance
- Add TWRP config

Change-Id: I647c09e430bc3904ff526ed662191e7d3b833e0b

2 files changed, 34 insertions, 23 deletions

diff --git a/rootdir/init.qcom.power.rc b/rootdir/init.qcom.power.rc
index fed2e28..809e37e 100644
--- a/rootdir/init.qcom.power.rc
+++ b/rootdir/init.qcom.power.rc
@@ -25,7 +25,7 @@ on charger
     write /sys/devices/system/cpu/cpu2/online 0
     write /sys/devices/system/cpu/cpu3/online 0
 
-on property:sys.boot_completed=1
+on enable-low-power
     write /sys/module/lpm_levels/enable_low_power/l2 4
     write /sys/module/msm_pm/modes/cpu0/power_collapse/suspend_enabled 1
     write /sys/module/msm_pm/modes/cpu1/power_collapse/suspend_enabled 1
@@ -43,28 +43,20 @@ on property:sys.boot_completed=1
     write /sys/module/msm_pm/modes/cpu1/standalone_power_collapse/idle_enabled 1
     write /sys/module/msm_pm/modes/cpu2/standalone_power_collapse/idle_enabled 1
     write /sys/module/msm_pm/modes/cpu3/standalone_power_collapse/idle_enabled 1
+    write /sys/module/msm_pm/modes/cpu1/retention/suspend_enabled 1
+    write /sys/module/msm_pm/modes/cpu2/retention/suspend_enabled 1
+    write /sys/module/msm_pm/modes/cpu3/retention/suspend_enabled 1
     write /sys/module/msm_pm/modes/cpu0/retention/idle_enabled 1
     write /sys/module/msm_pm/modes/cpu1/retention/idle_enabled 1
     write /sys/module/msm_pm/modes/cpu2/retention/idle_enabled 1
     write /sys/module/msm_pm/modes/cpu3/retention/idle_enabled 1
-    write /sys/module/msm_pm/modes/cpu1/retention/suspend_enabled 1
-    write /sys/module/msm_pm/modes/cpu2/retention/suspend_enabled 1
-    write /sys/module/msm_pm/modes/cpu3/retention/suspend_enabled 1
     write /sys/module/msm_thermal/core_control/enabled 0
+    write /sys/devices/system/cpu/cpu1/online 1
+    write /sys/devices/system/cpu/cpu2/online 1
+    write /sys/devices/system/cpu/cpu3/online 1
+
+    write /sys/class/devfreq/qcom,cpubw.40/governor "cpubw_hwmon"
 
-    # Configure the CPU governor
-    write /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor interactive
-    write /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor interactive
-    write /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor interactive
-    write /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor interactive
-    write /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay "19000 1400000:39000 1700000:19000"
-    write /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load 99
-    write /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq 1497600
-    write /sys/devices/system/cpu/cpufreq/interactive/io_is_busy 1
-    write /sys/devices/system/cpu/cpufreq/interactive/target_loads "85 1500000:90 1800000:70"
-    write /sys/devices/system/cpu/cpufreq/interactive/min_sample_time 40000
-    write /sys/devices/system/cpu/cpufreq/interactive/timer_rate 30000
-    write /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor 100000
     write /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 300000
     write /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq 300000
     write /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq 300000
@@ -77,6 +69,21 @@ on property:sys.boot_completed=1
     chmod 664 /sys/devices/system/cpu/cpu2/online
     chmod 664 /sys/devices/system/cpu/cpu3/online
 
+    write /dev/cpuctl/cpu.notify_on_migrate 1
+
+    write /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor "interactive"
+    write /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor "interactive"
+    write /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor "interactive"
+    write /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor "interactive"
+    write /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay "19000 1400000:39000 1700000:19000"
+    write /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load 99
+    write /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq 1190400
+    write /sys/devices/system/cpu/cpufreq/interactive/io_is_busy 1
+    write /sys/devices/system/cpu/cpufreq/interactive/target_loads "85 1500000:90 1800000:70"
+    write /sys/devices/system/cpu/cpufreq/interactive/min_sample_time 40000
+    write /sys/devices/system/cpu/cpufreq/interactive/sampling_down_factor 100000
+    write /sys/devices/system/cpu/cpufreq/interactive/timer_rate 30000
+
     write /sys/module/msm_thermal/core_control/enabled 1
 
     write /sys/module/cpu_boost/parameters/boost_ms 20
@@ -84,12 +91,19 @@ on property:sys.boot_completed=1
     write /sys/module/cpu_boost/parameters/input_boost_freq 1497600
     write /sys/module/cpu_boost/parameters/input_boost_ms 40
 
-    write /sys/class/devfreq/qcom,cpubw.40/governor "cpubw_hwmon"
+on boot
+    trigger enable-low-power
+
+on property:init.svc.recovery=running
+    trigger enable-low-power
+    write /sys/class/android_usb/android0/idVendor 0FCE
+    write /sys/class/android_usb/android0/idProduct 6${ro.usb.pid_suffix}
 
+on property:dev.bootcomplete=1
     # Set max mA current for usb/dc charger
     write /sys/class/power_supply/qpnp-dc/current_max 1800000
     write /sys/class/power_supply/usb/current_max 1500000
 
-    setprop sys.io.scheduler bfq
     rm /data/system/perfd/default_values
-    start mpdecision
\ No newline at end of file
+    setprop sys.io.scheduler "bfq"
+    start mpdecision
diff --git a/rootdir/init.recovery.qcom.rc b/rootdir/init.recovery.qcom.rc
deleted file mode 100644
index dca838c..0000000
--- a/rootdir/init.recovery.qcom.rc
+++ /dev/null
@@ -1,3 +0,0 @@
-on init
-    write /sys/class/android_usb/android0/idVendor 0fce
-    write /sys/class/android_usb/android0/idProduct 6182