Initial Shinano import

based on rhine-common 7e2a33e

12 files changed, 686 insertions, 0 deletions

diff --git a/rootdir/system/etc/firmware/wlan/prima/WCNSS_cfg.dat b/rootdir/system/etc/firmware/wlan/prima/WCNSS_cfg.dat
new file mode 100644
index 0000000..5685e79
--- /dev/null
+++ b/rootdir/system/etc/firmware/wlan/prima/WCNSS_cfg.dat
diff --git a/rootdir/system/etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini b/rootdir/system/etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini
new file mode 100644
index 0000000..9778686
--- /dev/null
+++ b/rootdir/system/etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini
@@ -0,0 +1,371 @@
+# This file allows user to override the factory
+
+# defaults for the WLAN Driver
+
+
+# Enable IMPS or not
+gEnableImps=1
+
+# Enable/Disable Idle Scan
+
+gEnableIdleScan=0
+
+
+# Increase sleep duration (seconds) during IMPS
+# 0 implies no periodic wake up from IMPS. Periodic wakeup is
+# unnecessary if Idle Scan is disabled.
+gImpsModSleepTime=0
+
+
+# Enable BMPS or not
+gEnableBmps=1
+
+# Enable suspend or not
+
+# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
+
+gEnableSuspend=3
+
+
+# Phy Mode (auto, b, g, n, etc)
+# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
+gDot11Mode=0
+
+
+# CSR Roaming Enable(1) Disable(0)
+
+gRoamingTime=0
+
+
+# Assigned MAC Addresses - This will be used until NV items are in place
+
+# Each byte of MAC address is represented in Hex format as XX
+
+Intf0MacAddress=000AF58989FF
+Intf1MacAddress=000AF58989FE
+Intf2MacAddress=000AF58989FD
+
+Intf3MacAddress=000AF58989FC
+
+
+# UAPSD service interval for VO,VI, BE, BK traffic
+
+InfraUapsdVoSrvIntv=0
+
+InfraUapsdViSrvIntv=0
+
+InfraUapsdBeSrvIntv=0
+
+InfraUapsdBkSrvIntv=0
+
+# Flag to allow STA send AddTspec even when ACM is Off
+gAddTSWhenACMIsOff=1
+
+# Make 1x1 the default antenna configuration
+
+gNumRxAnt=1
+
+
+# Beacon filtering frequency (unit in beacon intervals)
+
+gNthBeaconFilter=50
+
+
+# Enable WAPI or not
+
+# WAPIIsEnabled=0
+
+
+# Flags to filter Mcast abd Bcast RX packets.
+
+# Value 0: No filtering, 1: Filter all Multicast.
+
+# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
+
+McastBcastFilter=3
+
+
+#Flag to enable HostARPOffload feature or not
+
+hostArpOffload=1
+
+
+#SoftAP Related Parameters
+
+# AP MAc addr
+
+gAPMacAddr=000AF589dcab
+
+
+# 802.11n Protection flag
+
+gEnableApProt=1
+
+
+#Enable OBSS protection
+
+gEnableApOBSSProt=1
+
+
+#Enable/Disable UAPSD for SoftAP
+
+gEnableApUapsd=0
+
+
+# Fixed Rate
+
+gFixedRate=0
+
+
+# Maximum Tx power
+
+# gTxPowerCap=30
+
+
+# Fragmentation Threshold
+
+# gFragmentationThreshold=2346
+
+
+# RTS threshold
+
+RTSThreshold=2347
+
+
+# Intra-BSS forward
+
+gDisableIntraBssFwd=0
+
+
+# WMM Enable/Disable
+
+WmmIsEnabled=0
+
+
+# 802.11d support
+
+g11dSupportEnabled=1
+
+# CCX Support and fast transition
+CcxEnabled=0
+FastTransitionEnabled=1
+ImplicitQosIsEnabled=0
+gNeighborScanTimerPeriod=200
+
+gNeighborLookupThreshold=78
+
+gNeighborScanChannelMinTime=20
+gNeighborScanChannelMaxTime=30
+
+# Legacy (non-CCX, non-802.11r) Fast Roaming Support
+# To enable, set FastRoamEnabled=1
+# To disable, set FastRoamEnabled=0
+FastRoamEnabled=1
+
+#Check if the AP to which we are roaming is better than current AP in terms of RSSI.
+#Checking is disabled if set to Zero.Otherwise it will use this value as to how better
+#the RSSI of the new/roamable AP should be for roaming
+RoamRssiDiff=5
+
+# SAP Country code
+
+# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
+
+# Example
+
+#   US Indoor, USI
+
+#   Korea Outdoor, KRO
+
+#   Japan without optional byte, JP
+
+#   France without optional byte, FR
+
+#gAPCntryCode=USI
+
+
+#Short Guard Interval Enable/disable
+
+gShortGI20Mhz=1
+
+gShortGI40Mhz=1
+
+
+#Auto Shutdown  Value in seconds. A value of 0 means Auto shutoff is disabled
+
+gAPAutoShutOff=0
+
+
+# SAP auto channel selection configuration
+
+# 0 = disable auto channel selection
+
+# 1 = enable auto channel selection, channel provided by supplicant will be ignored
+
+gApAutoChannelSelection=0
+
+
+# Listen Energy Detect Mode Configuration
+
+# Valid values 0-128
+
+# 128 means disable Energy Detect feature
+
+# 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled.
+
+# 10-128 are reserved.
+
+# The EDET threshold mapping is as follows in 3dB step:
+
+# 0 = -60 dBm
+
+# 1 = -63 dBm
+
+# 2 = -66 dBm
+
+# ...
+
+# 7 = -81 dBm
+
+# 8 = -84 dBm
+
+# 9 = -87 dBm
+
+# Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as:
+
+#
+
+#  Range Loss  (dB)  =  EDET threshold level (dBm) + 97 dBm.
+
+#
+
+gEnablePhyAgcListenMode=128
+
+
+#Preferred channel to start BT AMP AP mode (0 means, any channel)
+
+BtAmpPreferredChannel=0
+
+
+#Preferred band (both or 2.4 only or 5 only)
+
+BandCapability=0
+
+
+#Beacon Early Termination (1 = enable the BET feature, 0 = disable)
+
+enableBeaconEarlyTermination=1
+
+beaconEarlyTerminationWakeInterval=11
+
+
+#Bluetooth Alternate Mac Phy (1 = enable the BT AMP feature, 0 = disable)
+
+gEnableBtAmp=0
+
+
+#SOFTAP Channel Range selection
+
+gAPChannelSelectStartChannel=1
+
+gAPChannelSelectEndChannel=11
+
+
+#SOFTAP Channel Range selection Operating band
+
+# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND
+
+gAPChannelSelectOperatingBand=0
+
+
+#Channel Bonding
+gChannelBondingMode5GHz=1
+
+
+#Enable Keep alive with non-zero period value
+
+gStaKeepAlivePeriod=30
+
+
+#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
+#For every 10 seconds DUT sends Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 seconds.)
+#For both active and power save clients.
+
+#Power save clients: DUT set TIM bit from 10th second onwards and till client honors TIM bit.
+#If doesn't honor for 5 seconds then Driver remove client.
+
+#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still DUT try on
+#11th second if not tries on 12th and so on till 15th second. Hence before disconnection DUT will send 5 NULL frames.
+#Hence in any case DUT will detect client got removed in (10+5) seconds. i.e., (gGoKeepAlivePeriod +gGoLinkMonitorPeriod)..
+
+#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
+#where we send NULL frame.
+
+#gApLinkMonitorPeriod = 10
+
+#gGoLinkMonitorPeriod = 10
+
+#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send or not.
+#Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPeriod+ gApKeepAlivePeriod.
+#gGoKeepAlivePeriod = 5
+
+#gApKeepAlivePeriod = 5
+#If set will start with active scan after driver load, otherwise will start with
+
+#passive scan to find out the domain
+
+#gEnableBypass11d=1
+
+
+#If set to 0, will not scan DFS channels
+
+gEnableDFSChnlScan=1
+
+
+gVhtChannelWidth=2
+gEnableLogp=1
+
+
+# Enable Automatic Tx Power control
+
+gEnableAutomaticTxPowerControl=1
+
+# 0 for OLPC 1 for CLPC and SCPC
+gEnableCloseLoop=1
+
+#Data Inactivity Timeout when in powersave (in ms)
+gDataInactivityTimeout=200
+
+# VHT Tx/Rx MCS values
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gVhtRxMCS=2
+gVhtTxMCS=2
+
+gEnableLpwrImgTransition=1
+
+# Enable Tx beamforming
+gTxBFEnable=1
+
+# Enable Tx LDPC
+#gTxLdpcEnable = 1 for HT mode, 2 for VHT mode,3 for both HT and VHT
+gTxLdpcEnable=3
+
+#FlexConnect Power Factor
+#Default is set to 0 (disable)
+gFlexConnectPowerFactor=0
+
+# Valid values are 2048,4096,8192 and so on
+# Please don't use values other than the ones mentioned above
+gMaxMediumTime=4096
+
+# 802.11K support
+gRrmEnable=1
+gRrmOperChanMax=8
+gRrmNonOperChanMax=8
+gRrmRandIntvl=100
+
+END
+
+# Note: Configuration parser would not read anything past the END marker
+
diff --git a/rootdir/system/etc/firmware/wlan/prima/WCNSS_qcom_wlan_nv.bin b/rootdir/system/etc/firmware/wlan/prima/WCNSS_qcom_wlan_nv.bin
new file mode 100644
index 0000000..a8dd301
--- /dev/null
+++ b/rootdir/system/etc/firmware/wlan/prima/WCNSS_qcom_wlan_nv.bin
diff --git a/rootdir/system/etc/gps.conf b/rootdir/system/etc/gps.conf
new file mode 100644
index 0000000..c07638e
--- /dev/null
+++ b/rootdir/system/etc/gps.conf
@@ -0,0 +1,75 @@
+XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra2.bin
+XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra2.bin
+XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra2.bin
+
+# Error Estimate
+# _SET = 1
+# _CLEAR = 0
+ERR_ESTIMATE=0
+
+#Test
+NTP_SERVER=time.gpsonextra.net
+#Asia
+# NTP_SERVER=asia.pool.ntp.org
+#Europe
+# NTP_SERVER=europe.pool.ntp.org
+#North America
+# NTP_SERVER=north-america.pool.ntp.org
+
+# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
+#               4 - Debug, 5 - Verbose
+# If DEBUG_LEVEL is commented, Android's logging levels will be used
+DEBUG_LEVEL = 3
+
+# Intermediate position report, 1=enable, 0=disable
+INTERMEDIATE_POS=0
+
+# supl version 2.0
+SUPL_VER=0x20000
+
+# GPS Capabilities bit mask
+# SCHEDULING = 0x01
+# MSB = 0x02
+# MSA = 0x04
+# ON_DEMAND_TIME = 0x10
+# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING
+CAPABILITIES=0x3
+
+# Accuracy threshold for intermediate positions
+# less accurate positions are ignored, 0 for passing all positions
+# ACCURACY_THRES=5000
+
+################################
+##### AGPS server settings #####
+################################
+
+# FOR SUPL SUPPORT, set the following
+SUPL_HOST=supl.google.com
+SUPL_PORT=7275
+
+# FOR C2K PDE SUPPORT, set the following
+# C2K_HOST=c2k.pde.com or IP
+# C2K_PORT=1234
+
+####################################
+#  LTE Positioning Profile Settings
+####################################
+# 0: Enable RRLP on LTE(Default)
+# 1: Enable LPP_User_Plane on LTE
+# 2: Enable LPP_Control_Plane
+# 3: Enable both LPP_User_Plane and LPP_Control_Plane
+LPP_PROFILE = 0
+
+################################
+# EXTRA SETTINGS
+################################
+# NMEA provider (1=Modem Processor, 0=Application Processor)
+NMEA_PROVIDER=1
+
+##################################################
+# Select Positioning Protocol on A-GLONASS system
+##################################################
+# 0x1: RRC CPlane
+# 0x2: RRLP UPlane
+# 0x4: LLP Uplane
+A_GLONASS_POS_PROTOCOL_SELECT = 0
diff --git a/rootdir/system/etc/init.qcom.bt.sh b/rootdir/system/etc/init.qcom.bt.sh
new file mode 100644
index 0000000..84820fb
--- /dev/null
+++ b/rootdir/system/etc/init.qcom.bt.sh
@@ -0,0 +1,83 @@
+#!/system/bin/sh
+
+BLUETOOTH_SLEEP_PATH=/proc/bluetooth/sleep/proto
+LOG_TAG="sony-bluetooth"
+LOG_NAME="${0}:"
+
+loge ()
+{
+  /system/bin/log -t $LOG_TAG -p e "$LOG_NAME $@"
+}
+
+logi ()
+{
+  /system/bin/log -t $LOG_TAG -p i "$LOG_NAME $@"
+}
+
+failed ()
+{
+  loge "$1: exit code $2"
+  exit $2
+}
+
+# Note that "hci_qcomm_init -e" prints expressions to set the shell variables
+# BTS_DEVICE, BTS_TYPE, BTS_BAUD, and BTS_ADDRESS.
+
+# BR/EDR & LE power class configurations
+POWER_CLASS=`getprop qcom.bt.dev_power_class`
+LE_POWER_CLASS=`getprop qcom.bt.le_dev_pwr_class`
+
+#find the transport type
+TRANSPORT=`getprop ro.qualcomm.bt.hci_transport`
+logi "Transport : $TRANSPORT"
+
+#load bd addr
+BDADDR=`/system/bin/cat /data/etc/bluetooth_bdaddr`
+
+setprop bluetooth.status off
+
+logi "BDADDR: $BDADDR"
+
+case $POWER_CLASS in
+  1) PWR_CLASS="-p 0" ;
+     logi "Power Class: 1";;
+  2) PWR_CLASS="-p 1" ;
+     logi "Power Class: 2";;
+  3) PWR_CLASS="-p 2" ;
+     logi "Power Class: CUSTOM";;
+  *) PWR_CLASS="";
+     logi "Power Class: Ignored. Default(1) used (1-CLASS1/2-CLASS2/3-CUSTOM)";
+     logi "Power Class: To override, Before turning BT ON; setprop qcom.bt.dev_power_class <1 or 2 or 3>";;
+esac
+
+case $LE_POWER_CLASS in
+  1) LE_PWR_CLASS="-P 0" ;
+     logi "LE Power Class: 1";;
+  2) LE_PWR_CLASS="-P 1" ;
+     logi "LE Power Class: 2";;
+  3) LE_PWR_CLASS="-P 2" ;
+     logi "LE Power Class: CUSTOM";;
+  *) LE_PWR_CLASS="-P 1";
+     logi "LE Power Class: Ignored. Default(2) used (1-CLASS1/2-CLASS2/3-CUSTOM)";
+     logi "LE Power Class: To override, Before turning BT ON; setprop qcom.bt.le_dev_pwr_class <1 or 2 or 3>";;
+esac
+
+if [ -z "$BDADDR" ]
+then
+  logwrapper /system/bin/hci_qcomm_init -e $PWR_CLASS $LE_PWR_CLASS -vv
+else
+  logwrapper /system/bin/hci_qcomm_init -b $BDADDR -e $PWR_CLASS $LE_PWR_CLASS -vv
+fi
+
+case $? in
+  0) logi "Bluetooth QSoC firmware download succeeded, $PWR_CLASS $BDADDR $TRANSPORT";;
+  *) failed "Bluetooth QSoC firmware download failed" $?;
+     setprop bluetooth.status off;
+     exit $?;;
+esac
+
+setprop bluetooth.status on
+
+logi "start bluetooth smd transport"
+
+exit 0
diff --git a/rootdir/system/etc/init.qcom.fm.sh b/rootdir/system/etc/init.qcom.fm.sh
new file mode 100644
index 0000000..adc7004
--- /dev/null
+++ b/rootdir/system/etc/init.qcom.fm.sh
@@ -0,0 +1,106 @@
+#!/system/bin/sh
+# Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of Code Aurora nor
+#       the names of its contributors may be used to endorse or promote
+#       products derived from this software without specific prior written
+#       permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+setprop hw.fm.init 0
+
+mode=`getprop hw.fm.mode`
+version=`getprop hw.fm.version`
+isAnalog=`getprop hw.fm.isAnalog`
+
+#find the transport type
+TRANSPORT=`getprop ro.qualcomm.bt.hci_transport`
+
+LOG_TAG="qcom-fm"
+LOG_NAME="${0}:"
+
+loge ()
+{
+  /system/bin/log -t $LOG_TAG -p e "$LOG_NAME $@"
+}
+
+logi ()
+{
+  /system/bin/log -t $LOG_TAG -p i "$LOG_NAME $@"
+}
+
+failed ()
+{
+  loge "$1: exit code $2"
+  exit $2
+}
+
+logi "In FM shell Script"
+logi "mode: $mode"
+logi "isAnalog: $isAnalog"
+logi "Transport : $TRANSPORT"
+logi "Version : $version"
+
+#$fm_qsoc_patches <fm_chipVersion> <enable/disable WCM>
+#
+case $mode in
+  "normal")
+    case $TRANSPORT in
+    "smd")
+        logi "inserting the radio transport module"
+        insmod /system/lib/modules/radio-iris-transport.ko
+     ;;
+     *)
+        logi "default transport case "
+     ;;
+    esac
+        /system/bin/fm_qsoc_patches $version 0
+     ;;
+  "wa_enable")
+   /system/bin/fm_qsoc_patches $version 1
+     ;;
+  "wa_disable")
+   /system/bin/fm_qsoc_patches $version 2
+     ;;
+  "config_dac")
+   /system/bin/fm_qsoc_patches $version 3 $isAnalog
+     ;;
+   *)
+    logi "Shell: Default case"
+    /system/bin/fm_qsoc_patches $version 0
+    ;;
+esac
+
+exit_code_fm_qsoc_patches=$?
+
+case $exit_code_fm_qsoc_patches in
+   0)
+	logi "FM QSoC calibration and firmware download succeeded"
+   ;;
+  *)
+	failed "FM QSoC firmware download and/or calibration failed" $exit_code_fm_qsoc_patches
+   ;;
+esac
+
+setprop hw.fm.init 1
+
+exit 0
diff --git a/rootdir/system/etc/init.qcom.wifi.sh b/rootdir/system/etc/init.qcom.wifi.sh
new file mode 100644
index 0000000..ea83027
--- /dev/null
+++ b/rootdir/system/etc/init.qcom.wifi.sh
@@ -0,0 +1,16 @@
+#!/system/bin/sh
+
+if [ -e /data/misc/wifi/WCNSS_qcom_wlan_cal.bin ]; then
+    calparm=`ls /sys/module/wcnsscore/parameters/has_calibrated_data`
+    if [ -e $calparm ] && [ ! -e /data/misc/wifi/WCN_FACTORY ]; then
+        echo 1 > $calparm
+    fi
+fi
+
+# There is a device file.  Write to the file
+# so that the driver knows userspace is
+# available for firmware download requests
+echo 1 > /dev/wcnss_wlan
+echo $serialno > /sys/devices/fb000000.qcom,wcnss-wlan/serial_number
+
+exit 0
diff --git a/rootdir/system/etc/nfcee_access.xml b/rootdir/system/etc/nfcee_access.xml
new file mode 100644
index 0000000..cabad5f
--- /dev/null
+++ b/rootdir/system/etc/nfcee_access.xml
@@ -0,0 +1,14 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Applications granted NFCEE access on user builds
+
+    See packages/apps/Nfc/etc/sample_nfcee_access.xml for full documentation.
+     -->
+
+    <!--  Google wallet release signature -->
+    <signer android:signature="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" />
+
+    <!-- SoMC platform signature -->
+    <signer android:signature="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" />
+
+</resources>
diff --git a/rootdir/system/etc/nfcee_access_debug.xml b/rootdir/system/etc/nfcee_access_debug.xml
new file mode 100644
index 0000000..a96a2d1
--- /dev/null
+++ b/rootdir/system/etc/nfcee_access_debug.xml
@@ -0,0 +1,17 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Applications granted NFCEE access on userdebug/eng builds
+
+    See packages/apps/Nfc/etc/sample_nfcee_access.xml for full documentation.
+     -->
+
+    <!-- Google Wallet dev signature -->
+    <signer android:signature="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" />
+
+    <!-- Google wallet release signature -->
+    <signer android:signature="3082044c30820334a003020102020900a8cd17c93da5d990300d06092a864886f70d01010505003077310b3009060355040613025553311330110603550408130a43616c69666f726e6961311630140603550407130d4d6f756e7461696e205669657731143012060355040a130b476f6f676c6520496e632e3110300e060355040b1307416e64726f6964311330110603550403130a476f6f676c65204e4643301e170d3131303332343031303635335a170d3338303830393031303635335a3077310b3009060355040613025553311330110603550408130a43616c69666f726e6961311630140603550407130d4d6f756e7461696e205669657731143012060355040a130b476f6f676c6520496e632e3110300e060355040b1307416e64726f6964311330110603550403130a476f6f676c65204e464330820120300d06092a864886f70d01010105000382010d00308201080282010100c30f88add9b492096a2c586a5a9a80356bfa026958f8ff0c5dfaf59f49268ad870dee821a53e1f5b170fc96245a3c982a7cb4527053be35e34f396d24b2291ec0c528d6e26927465e06875ea621f7ff98c40e3345b204907cc9354743acdaace65565f48ba74cd4121cdc876df3522badb095c20d934c56a3e5c393ee5f0e02f8fe0621f918d1f35a82489252c6fa6b63392a7686b3e48612d06a9cf6f49bff11d5d96289c9dfe14ac5762439697dd29eafdb9810de3263513a905ac8e8eaf20907e46750a5ab7bf9a77262f47b03f5a3c6e6d7b51343f69c7f725f70bcc1b4ad592250b705a86e6e83ee2ae37fe5701bcbdb26feefdfff60f6a5bdfb5b64793020103a381dc3081d9301d0603551d0e041604141ccece0eea4dc1121fc7515f0d0a0c72e08cc96d3081a90603551d230481a130819e80141ccece0eea4dc1121fc7515f0d0a0c72e08cc96da17ba4793077310b3009060355040613025553311330110603550408130a43616c69666f726e6961311630140603550407130d4d6f756e7461696e205669657731143012060355040a130b476f6f676c6520496e632e3110300e060355040b1307416e64726f6964311330110603550403130a476f6f676c65204e4643820900a8cd17c93da5d990300c0603551d13040530030101ff300d06092a864886f70d01010505000382010100a470c728e1d31b06d9af6ae768b565046c57806b9843724931d75d4ca10c321520d33ccfed2aa65462234c9ef9b6f910cc676b99cb7f9895d6c06763574fbb78331275dc5cf38fbaa918d7938c051ffba2ade8f303cde8d9e68a048d1fdb9e7c9f2a49b222c68fff422bf15569b85eeeedb04aa30873dbe64b9c9e74f8f2c2f6c40124aaa8d1780d18512b540add28b3e9581971a4170dd868cf5f31e44712b2c23bb51037d7ef9f87a6e5bdb35e2ceb6bb022636c17a56a96bc7a50258c0bd2ed7b31555a18452e17321a0d52838c82f63f742d74ff79586a5cbb7faf7198a84bcf744310e9e927597f00a23dd00660800c2238d90b2fb372dfdbba75bd852e" />
+
+    <!-- Platform dev-keys signature -->
+    <signer android:signature="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" />
+
+</resources>
diff --git a/rootdir/system/etc/wifi/p2p_supplicant_overlay.conf b/rootdir/system/etc/wifi/p2p_supplicant_overlay.conf
new file mode 100644
index 0000000..acbace2
--- /dev/null
+++ b/rootdir/system/etc/wifi/p2p_supplicant_overlay.conf
@@ -0,0 +1 @@
+disable_scan_offload=1
diff --git a/rootdir/system/etc/wifi/wpa_supplicant_overlay.conf b/rootdir/system/etc/wifi/wpa_supplicant_overlay.conf
new file mode 100644
index 0000000..acbace2
--- /dev/null
+++ b/rootdir/system/etc/wifi/wpa_supplicant_overlay.conf
@@ -0,0 +1 @@
+disable_scan_offload=1
diff --git a/rootdir/system/lib/egl/egl.cfg b/rootdir/system/lib/egl/egl.cfg
new file mode 100644
index 0000000..2a11ba2
--- /dev/null
+++ b/rootdir/system/lib/egl/egl.cfg
@@ -0,0 +1,2 @@
+0 0 android
+0 1 adreno