arch/x86: remove .intel_syntax

Replace with the more familiar AT&T syntax.
Tested by sha1sum(1)ing the object files, and checking the objdump that
the code in question was actually compiled.

Change-Id: Ie85b8ee5dad1794864c18683427e32f055745221
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13132
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

3 files changed, 47 insertions, 55 deletions

diff --git a/src/arch/x86/boot.c b/src/arch/x86/boot.c
index 71b79fe12a..b23e322d6c 100644
--- a/src/arch/x86/boot.c
+++ b/src/arch/x86/boot.c
@@ -60,43 +60,40 @@ static void jmp_payload(void *entry, unsigned long buffer, unsigned long size)
 		"       push    %1\n\t"
 		"       push    %0\n\t"
 
-		".intel_syntax noprefix\n\t"
 		/* use iret to switch to 32-bit code segment */
-		"       xor     rax,rax\n\t"
-		"       mov     ax, ss\n\t"
-		"       push    rax\n\t"
-		"       mov     rax, rsp\n\t"
-		"       add     rax, 8\n\t"
-		"       push    rax\n\t"
+		"       xor     %%rax,%%rax\n\t"
+		"       mov     %%ss, %%ax\n\t"
+		"       push    %%rax\n\t"
+		"       mov     %%rsp, %%rax\n\t"
+		"       add     $8, %%rax\n\t"
+		"       push    %%rax\n\t"
 		"       pushfq\n\t"
-		"       push    0x10\n\t"
-		"       lea     rax,[rip+3]\n\t"
-		"       push    rax\n\t"
+		"       push    $0x10\n\t"
+		"       lea     3(%%rip), %%rax\n\t"
+		"       push    %%rax\n\t"
 		"       iretq\n\t"
 		".code32\n\t"
 		/* disable paging */
-		"       mov     eax, cr0\n\t"
-		"       btc     eax, 31\n\t"
-		"       mov     cr0, eax\n\t"
+		"       mov     %%cr0, %%eax\n\t"
+		"       btc     $31, %%eax\n\t"
+		"       mov     %%eax, %%cr0\n\t"
 		/* disable long mode */
-		"       mov     ecx, 0xC0000080\n\t"
+		"       mov     $0xC0000080, %%ecx\n\t"
 		"       rdmsr\n\t"
-		"       btc     eax, 8\n\t"
+		"       btc     $8, %%eax\n\t"
 		"       wrmsr\n\t"
 
-		"       pop     eax\n\t"
-		"       add     esp, 4\n\t"
-		"       pop     ebx\n\t"
-		"       add     esp, 4\n\t"
-		"       pop     ecx\n\t"
-
-		"       add     esp, 4\n\t"
-		"       pop     edx\n\t"
-		"       add     esp, 4\n\t"
-		"       pop     esi\n\t"
-		"       add     esp, 4\n\t"
-
-		".att_syntax prefix\n\t"
+		"       pop     %%eax\n\t"
+		"       add     $4, %%esp\n\t"
+		"       pop     %%ebx\n\t"
+		"       add     $4, %%esp\n\t"
+		"       pop     %%ecx\n\t"
+
+		"       add     $4, %%esp\n\t"
+		"       pop     %%edx\n\t"
+		"       add     $4, %%esp\n\t"
+		"       pop     %%esi\n\t"
+		"       add     $4, %%esp\n\t"
 #endif
 
 		/* Save the callee save registers... */
diff --git a/src/arch/x86/c_start.S b/src/arch/x86/c_start.S
index 124bfa84bf..65ab0be042 100644
--- a/src/arch/x86/c_start.S
+++ b/src/arch/x86/c_start.S
@@ -400,29 +400,26 @@ _idt_end:
 
 #ifdef __x86_64__
 SetCodeSelector:
-.intel_syntax noprefix
-
 	# save rsp because iret will align it to a 16 byte boundary
-	mov	rdx, rsp
+	mov	%rsp, %rdx
 
 	# use iret to jump to a 64-bit offset in a new code segment
 	# iret will pop cs:rip, flags, then ss:rsp
-	mov	ax, ss		# need to push ss..
-	push	rax		# push ss instuction not valid in x64 mode, so use ax
-	push	rsp
+	mov	%ss, %ax	# need to push ss..
+	push	%rax		# push ss instuction not valid in x64 mode, so use ax
+	push	%rsp
 	pushfq
-	push	rcx		# cx is code segment selector from caller
-	mov	rax, offset setCodeSelectorLongJump
-	push	rax
+	push	%rcx		# cx is code segment selector from caller
+	mov	$setCodeSelectorLongJump, %rax
+	push	%rax
 
 	# the iret will continue at next instruction, with the new cs value loaded
 	iretq
 
 setCodeSelectorLongJump:
 	# restore rsp, it might not have been 16-byte aligned on entry
-	mov	rsp, rdx
+	mov	%rdx, %rsp
 	ret
-.att_syntax prefix
 
 	.previous
 .code64
diff --git a/src/arch/x86/wakeup.S b/src/arch/x86/wakeup.S
index 2c0950e399..aad72c2d61 100644
--- a/src/arch/x86/wakeup.S
+++ b/src/arch/x86/wakeup.S
@@ -29,32 +29,30 @@
 	.globl __wakeup
 __wakeup:
 #ifdef __x86_64__
-	.intel_syntax noprefix
-	xor     rax,rax
-	mov     ax, ss
-	push    rax
-	mov     rax, rsp
-	add     rax, 8
-	push    rax
+	xor     %rax,%rax
+	mov     %ss, %ax
+	push    %rax
+	mov     %rsp, %rax
+	add     $8, %rax
+	push    %rax
 	pushfq
-	push    0x10
-	lea     rax,[rip+3]
-	push    rax
+	push    $0x10
+	lea     3(%rip), %rax
+	push    %rax
 	iretq
 
 	.code32
 
 	/* disable paging */
-	mov     eax, cr0
-	btc     eax, 31
-	mov     cr0, eax
+	mov     %cr0, %eax
+	btc     $31, %eax
+	mov     %eax, %cr0
 
 	/* disable long mode */
-	mov     ecx, 0xC0000080
+	mov     $0xC0000080, %ecx
 	rdmsr
-	btc     eax, 8
+	btc     $8, %eax
 	wrmsr
-	.att_syntax prefix
 #endif
 	/* First prepare the jmp to the resume vector */
 	mov	0x4(%esp), %eax	/* vector */