1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
|
/*
* Copyright 2004 Tyan Computer
* by yhlu@tyan.com
*/
#include <device/smbus_def.h>
#define SMBHSTSTAT 0x1
#define SMBHSTPRTCL 0x0
#define SMBHSTCMD 0x3
#define SMBXMITADD 0x2
#define SMBHSTDAT0 0x4
#define SMBHSTDAT1 0x5
/* Between 1-10 seconds, We should never timeout normally
* Longer than this is just painful when a timeout condition occurs.
*/
#define SMBUS_TIMEOUT (100*1000*10)
static inline void smbus_delay(void)
{
outb(0x80, 0x80);
}
static int smbus_wait_until_ready(unsigned smbus_io_base)
{
unsigned long loops;
loops = SMBUS_TIMEOUT;
do {
unsigned char val;
smbus_delay();
val = inb(smbus_io_base + SMBHSTSTAT);
if ((val & 0x1f) == 0) {
break;
}
if(loops == (SMBUS_TIMEOUT / 2)) {
outb((val & 0x1f),smbus_io_base + SMBHSTSTAT);
}
} while(--loops);
return loops?0:-2;
}
static int smbus_wait_until_done(unsigned smbus_io_base)
{
unsigned long loops;
loops = SMBUS_TIMEOUT;
do {
unsigned char val;
smbus_delay();
val = inb(smbus_io_base + SMBHSTSTAT);
if ( (val & 0xff) != 0) {
break;
}
} while(--loops);
return loops?0:-3;
}
static int do_smbus_recv_byte(unsigned smbus_io_base, unsigned device)
{
unsigned char global_status_register;
unsigned char byte;
#if 0
// Don't need, when you write to PRTCL, the status will be cleared automatically
if (smbus_wait_until_ready(smbus_io_base) < 0) {
return -2;
}
#endif
/* set the device I'm talking too */
outb(((device & 0x7f) << 1)|1 , smbus_io_base + SMBXMITADD);
smbus_delay();
/* set the command/address... */
outb(0, smbus_io_base + SMBHSTCMD);
smbus_delay();
/* byte data recv */
outb(0x05, smbus_io_base + SMBHSTPRTCL);
smbus_delay();
/* poll for transaction completion */
if (smbus_wait_until_done(smbus_io_base) < 0) {
return -3;
}
global_status_register = inb(smbus_io_base + SMBHSTSTAT) & 0x80; /* lose check */
/* read results of transaction */
byte = inb(smbus_io_base + SMBHSTDAT0);
if (global_status_register != 0x80) { // lose check, otherwise it should be 0
return -1;
}
return byte;
}
static int do_smbus_send_byte(unsigned smbus_io_base, unsigned device, unsigned char val)
{
unsigned global_status_register;
#if 0
// Don't need, when you write to PRTCL, the status will be cleared automatically
if (smbus_wait_until_ready(smbus_io_base) < 0) {
return -2;
}
#endif
outb(val, smbus_io_base + SMBHSTDAT0);
smbus_delay();
/* set the device I'm talking too */
outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBXMITADD);
smbus_delay();
outb(0, smbus_io_base + SMBHSTCMD);
smbus_delay();
/* set up for a byte data write */
outb(0x04, smbus_io_base + SMBHSTPRTCL);
smbus_delay();
/* poll for transaction completion */
if (smbus_wait_until_done(smbus_io_base) < 0) {
return -3;
}
global_status_register = inb(smbus_io_base + SMBHSTSTAT) & 0x80; /* lose check */;
if (global_status_register != 0x80) {
return -1;
}
return 0;
}
static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address)
{
unsigned char global_status_register;
unsigned char byte;
#if 0
// Don't need, when you write to PRTCL, the status will be cleared automatically
if (smbus_wait_until_ready(smbus_io_base) < 0) {
return -2;
}
#endif
/* set the device I'm talking too */
outb(((device & 0x7f) << 1)|1 , smbus_io_base + SMBXMITADD);
smbus_delay();
/* set the command/address... */
outb(address & 0xff, smbus_io_base + SMBHSTCMD);
smbus_delay();
/* byte data read */
outb(0x07, smbus_io_base + SMBHSTPRTCL);
smbus_delay();
/* poll for transaction completion */
if (smbus_wait_until_done(smbus_io_base) < 0) {
return -3;
}
global_status_register = inb(smbus_io_base + SMBHSTSTAT) & 0x80; /* lose check */
/* read results of transaction */
byte = inb(smbus_io_base + SMBHSTDAT0);
if (global_status_register != 0x80) { // lose check, otherwise it should be 0
return -1;
}
return byte;
}
static int do_smbus_write_byte(unsigned smbus_io_base, unsigned device, unsigned address, unsigned char val)
{
unsigned global_status_register;
#if 0
// Don't need, when you write to PRTCL, the status will be cleared automatically
if (smbus_wait_until_ready(smbus_io_base) < 0) {
return -2;
}
#endif
outb(val, smbus_io_base + SMBHSTDAT0);
smbus_delay();
/* set the device I'm talking too */
outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBXMITADD);
smbus_delay();
outb(address & 0xff, smbus_io_base + SMBHSTCMD);
smbus_delay();
/* set up for a byte data write */
outb(0x06, smbus_io_base + SMBHSTPRTCL);
smbus_delay();
/* poll for transaction completion */
if (smbus_wait_until_done(smbus_io_base) < 0) {
return -3;
}
global_status_register = inb(smbus_io_base + SMBHSTSTAT) & 0x80; /* lose check */;
if (global_status_register != 0x80) {
return -1;
}
return 0;
}
|
