1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
|
/*
* (C) 2003 Linux Networx, SuSE Linux AG
* 2006.1 yhlu add dest apicid for IRQ0
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <pc80/mc146818rtc.h>
#include <pc80/isa-dma.h>
#include <cpu/x86/lapic.h>
#include <stdlib.h>
#include "amd8111.h"
#define NMI_OFF 0
struct ioapicreg {
unsigned int reg;
unsigned int value_low, value_high;
};
static struct ioapicreg ioapicregvalues[] = {
#define ALL (0xff << 24)
#define NONE (0)
#define DISABLED (1 << 16)
#define ENABLED (0 << 16)
#define TRIGGER_EDGE (0 << 15)
#define TRIGGER_LEVEL (1 << 15)
#define POLARITY_HIGH (0 << 13)
#define POLARITY_LOW (1 << 13)
#define PHYSICAL_DEST (0 << 11)
#define LOGICAL_DEST (1 << 11)
#define ExtINT (7 << 8)
#define NMI (4 << 8)
#define SMI (2 << 8)
#define INT (1 << 8)
/* IO-APIC virtual wire mode configuration */
/* mask, trigger, polarity, destination, delivery, vector */
{ 0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT, NONE},
{ 1, DISABLED, NONE},
{ 2, DISABLED, NONE},
{ 3, DISABLED, NONE},
{ 4, DISABLED, NONE},
{ 5, DISABLED, NONE},
{ 6, DISABLED, NONE},
{ 7, DISABLED, NONE},
{ 8, DISABLED, NONE},
{ 9, DISABLED, NONE},
{ 10, DISABLED, NONE},
{ 11, DISABLED, NONE},
{ 12, DISABLED, NONE},
{ 13, DISABLED, NONE},
{ 14, DISABLED, NONE},
{ 15, DISABLED, NONE},
{ 16, DISABLED, NONE},
{ 17, DISABLED, NONE},
{ 18, DISABLED, NONE},
{ 19, DISABLED, NONE},
{ 20, DISABLED, NONE},
{ 21, DISABLED, NONE},
{ 22, DISABLED, NONE},
{ 23, DISABLED, NONE},
/* Be careful and don't write past the end... */
};
static void setup_ioapic(void)
{
int i;
unsigned long value_low, value_high;
unsigned long ioapic_base = 0xfec00000;
volatile unsigned long *l;
struct ioapicreg *a = ioapicregvalues;
unsigned long bsp_apicid = lapicid();
l = (unsigned long *) ioapic_base;
ioapicregvalues[0].value_high = bsp_apicid<<(56-32);
printk_debug("amd8111: ioapic bsp_apicid = %02x\n", bsp_apicid);
for (i = 0; i < ARRAY_SIZE(ioapicregvalues);
i++, a++) {
l[0] = (a->reg * 2) + 0x10;
l[4] = a->value_low;
value_low = l[4];
l[0] = (a->reg *2) + 0x11;
l[4] = a->value_high;
value_high = l[4];
if ((i==0) && (value_low == 0xffffffff)) {
printk_warning("IO APIC not responding.\n");
return;
}
printk_spew("for IRQ, reg 0x%08x value 0x%08x 0x%08x\n",
a->reg, a->value_low, a->value_high);
}
}
static void enable_hpet(struct device *dev)
{
unsigned long hpet_address;
pci_write_config32(dev,0xa0, 0xfed00001);
hpet_address = pci_read_config32(dev,0xa0)& 0xfffffffe;
printk_debug("enabling HPET @0x%x\n", hpet_address);
}
static void lpc_init(struct device *dev)
{
uint8_t byte;
int nmi_option;
/* IO APIC initialization */
byte = pci_read_config8(dev, 0x4B);
byte |= 1;
pci_write_config8(dev, 0x4B, byte);
setup_ioapic();
/* posted memory write enable */
byte = pci_read_config8(dev, 0x46);
pci_write_config8(dev, 0x46, byte | (1<<0));
/* Enable 5Mib Rom window */
byte = pci_read_config8(dev, 0x43);
byte |= 0xc0;
pci_write_config8(dev, 0x43, byte);
/* Enable Port 92 fast reset */
byte = pci_read_config8(dev, 0x41);
byte |= (1 << 5);
pci_write_config8(dev, 0x41, byte);
/* Enable Error reporting */
/* Set up sync flood detected */
byte = pci_read_config8(dev, 0x47);
byte |= (1 << 1);
pci_write_config8(dev, 0x47, byte);
/* Set up NMI on errors */
byte = pci_read_config8(dev, 0x40);
byte |= (1 << 1); /* clear PW2LPC error */
byte |= (1 << 6); /* clear LPCERR */
pci_write_config8(dev, 0x40, byte);
nmi_option = NMI_OFF;
get_option(&nmi_option, "nmi");
if (nmi_option) {
byte |= (1 << 7); /* set NMI */
pci_write_config8(dev, 0x40, byte);
}
/* Initialize the real time clock */
rtc_init(0);
/* Initialize isa dma */
isa_dma_init();
/* Initialize the High Precision Event Timers */
enable_hpet(dev);
}
static void amd8111_lpc_read_resources(device_t dev)
{
struct resource *res;
/* Get the normal PCI resources of this device. */
pci_dev_read_resources(dev);
/* Add an extra subtractive resource for both memory and I/O. */
res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
res->base = 0;
res->size = 0x1000;
res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
res->base = 0xff800000;
res->size = 0x00800000; /* 8 MB for flash */
res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
res = new_resource(dev, 3); /* IOAPIC */
res->base = 0xfec00000;
res->size = 0x00001000;
res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
}
static void amd8111_lpc_enable_resources(device_t dev)
{
pci_dev_enable_resources(dev);
enable_childrens_resources(dev);
}
static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
pci_write_config32(dev, 0x70,
((device & 0xffff) << 16) | (vendor & 0xffff));
}
static struct pci_operations lops_pci = {
.set_subsystem = lpci_set_subsystem,
};
static struct device_operations lpc_ops = {
.read_resources = amd8111_lpc_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = amd8111_lpc_enable_resources,
.init = lpc_init,
.scan_bus = scan_static_bus,
.enable = amd8111_enable,
.ops_pci = &lops_pci,
};
static const struct pci_driver lpc_driver __pci_driver = {
.ops = &lpc_ops,
.vendor = PCI_VENDOR_ID_AMD,
.device = PCI_DEVICE_ID_AMD_8111_ISA,
};
|
