1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007-2008 coresystems GmbH
* Copyright (C) 2014 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _SOC_INTEL_BROADWELL_CHIP_H_
#define _SOC_INTEL_BROADWELL_CHIP_H_
struct soc_intel_broadwell_config {
/*
* Interrupt Routing configuration
* If bit7 is 1, the interrupt is disabled.
*/
uint8_t pirqa_routing;
uint8_t pirqb_routing;
uint8_t pirqc_routing;
uint8_t pirqd_routing;
uint8_t pirqe_routing;
uint8_t pirqf_routing;
uint8_t pirqg_routing;
uint8_t pirqh_routing;
/* GPE configuration */
uint32_t gpe0_en_1;
uint32_t gpe0_en_2;
uint32_t gpe0_en_3;
uint32_t gpe0_en_4;
/* GPIO SMI configuration */
uint32_t alt_gp_smi_en;
/* IDE configuration */
uint8_t sata_port_map;
uint32_t sata_port0_gen3_tx;
uint32_t sata_port1_gen3_tx;
uint32_t sata_port0_gen3_dtle;
uint32_t sata_port1_gen3_dtle;
/*
* SATA DEVSLP Mux
* 0 = port 0 DEVSLP on DEVSLP0/GPIO33
* 1 = port 3 DEVSLP on DEVSLP0/GPIO33
*/
uint8_t sata_devslp_mux;
/*
* DEVSLP Disable
* 0: DEVSLP is enabled
* 1: DEVSLP is disabled
*/
uint8_t sata_devslp_disable;
/* Generic IO decode ranges */
uint32_t gen1_dec;
uint32_t gen2_dec;
uint32_t gen3_dec;
uint32_t gen4_dec;
/* Enable linear PCIe Root Port function numbers starting at zero */
uint8_t pcie_port_coalesce;
/* Force root port ASPM configuration with port bitmap */
uint8_t pcie_port_force_aspm;
/* Put SerialIO devices into ACPI mode instead of a PCI device */
uint8_t sio_acpi_mode;
/* I2C voltage select: 0=3.3V 1=1.8V */
uint8_t sio_i2c0_voltage;
uint8_t sio_i2c1_voltage;
/*
* Clock Disable Map:
* [21:16] = CLKOUT_PCIE# 5-0
* [24] = CLKOUT_ITPXDP
*/
uint32_t icc_clock_disable;
/*
* Digital Port Hotplug Enable:
* 0x04 = Enabled, 2ms short pulse
* 0x05 = Enabled, 4.5ms short pulse
* 0x06 = Enabled, 6ms short pulse
* 0x07 = Enabled, 100ms short pulse
*/
u8 gpu_dp_b_hotplug;
u8 gpu_dp_c_hotplug;
u8 gpu_dp_d_hotplug;
/* Panel power sequence timings */
u8 gpu_panel_port_select;
u8 gpu_panel_power_cycle_delay;
u16 gpu_panel_power_up_delay;
u16 gpu_panel_power_down_delay;
u16 gpu_panel_power_backlight_on_delay;
u16 gpu_panel_power_backlight_off_delay;
/* Panel backlight settings */
u32 gpu_cpu_backlight;
u32 gpu_pch_backlight;
/*
* Graphics CD Clock Frequency
* 0 = 337.5MHz
* 1 = 450MHz
* 2 = 540MHz
* 3 = 675MHz
*/
int cdclk;
/* Enable S0iX support */
int s0ix_enable;
/* TCC activation offset */
int tcc_offset;
};
typedef struct soc_intel_broadwell_config config_t;
extern struct chip_operations soc_ops;
#endif
|
