1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/mmio.h>
#include <device/pci_ops.h>
#include <soc/pci_devs.h>
#include <soc/ramstage.h>
#include <soc/sata.h>
#include <console/console.h>
#include <delay.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include "chip.h"
typedef struct soc_intel_baytrail_config config_t;
static inline void sir_write(struct device *dev, int idx, u32 value)
{
pci_write_config32(dev, SATA_SIRI, idx);
pci_write_config32(dev, SATA_SIRD, value);
}
static void sata_init(struct device *dev)
{
config_t *config = config_of(dev);
u32 reg32;
u16 reg16;
u8 reg8;
printk(BIOS_DEBUG, "SATA: Initializing...\n");
if (!config->sata_ahci) {
/* Set legacy or native decoding mode */
if (config->ide_legacy_combined) {
reg8 = pci_read_config8(dev, 0x09);
reg8 &= ~0x5;
pci_write_config8(dev, 0x09, reg8);
} else {
reg8 = pci_read_config8(dev, 0x09);
reg8 |= 0x5;
pci_write_config8(dev, 0x09, reg8);
}
/* Set capabilities pointer */
pci_write_config8(dev, 0x34, 0x70);
reg16 = pci_read_config16(dev, 0x70);
reg16 &= ~0xFF00;
pci_write_config16(dev, 0x70, reg16);
}
/* Primary timing - decode enable */
reg16 = pci_read_config16(dev, 0x40);
reg16 |= 1 << 15;
pci_write_config16(dev, 0x40, reg16);
/* Secondary timing - decode enable */
reg16 = pci_read_config16(dev, 0x42);
reg16 |= 1 << 15;
pci_write_config16(dev, 0x42, reg16);
/* Port mapping enables */
reg16 = pci_read_config16(dev, 0x90);
reg16 |= (config->sata_port_map ^ 0x3) << 8;
pci_write_config16(dev, 0x90, reg16);
/* Port control enables */
reg16 = pci_read_config16(dev, 0x92);
reg16 &= ~0x003f;
reg16 |= config->sata_port_map;
pci_write_config16(dev, 0x92, reg16);
if (config->sata_ahci) {
u8 *abar = (u8 *)pci_read_config32(dev, PCI_BASE_ADDRESS_5);
/* Enable CR memory space decoding */
reg16 = pci_read_config16(dev, 0x04);
reg16 |= 0x2;
pci_write_config16(dev, 0x04, reg16);
/* Set capability register */
reg32 = read32(abar + 0x00);
reg32 |= 0x0c046000; // set PSC+SSC+SALP+SSS+SAM
reg32 &= ~0x00f20060; // clear SXS+EMS+PMS+gen bits
reg32 |= (0x3 << 20); // Gen3 SATA
write32(abar + 0x00, reg32);
/* Ports enabled */
reg32 = read32(abar + 0x0c);
reg32 &= (u32)(~0x3f);
reg32 |= config->sata_port_map;
write32(abar + 0xc, reg32);
/* Two extra reads to latch */
read32(abar + 0x0c);
read32(abar + 0x0c);
/* Set cap2 - Support devslp */
reg32 = (1 << 5) | (1 << 4) | (1 << 3);
write32(abar + 0x24, reg32);
/* Set PxCMD registers */
reg32 = read32(abar + 0x118);
reg32 &= ~((1 << 27) | (1 << 26) | (1 << 22) | (1 << 21) |
(1 << 19) | (1 << 18) | (1 << 1));
reg32 |= 2;
write32(abar + 0x118, reg32);
reg32 = read32(abar + 0x198);
reg32 &= ~((1 << 27) | (1 << 26) | (1 << 22) | (1 << 21) |
(1 << 19) | (1 << 18) | (1 << 1));
reg32 |= 2;
write32(abar + 0x198, reg32);
/* Clear reset features */
write32(abar + 0xc8, 0);
/* Enable interrupts */
reg8 = read8(abar + 0x04);
reg8 |= 0x02;
write8(abar + 0x04, reg8);
} else {
/* TODO(shawnn): Configure IDE SATA speed regs */
}
/* 1.4 us delay after configuring port / enable bits */
udelay(2);
/* Enable clock for ports */
reg32 = pci_read_config32(dev, 0x94);
reg32 &= ~(config->sata_port_map << 24);
pci_write_config32(dev, 0x94, reg32);
/* Lock SataGc register */
reg32 = (0x1 << 31) | (0x7 << 12);
pci_write_config32(dev, 0x9c, reg32);
}
static void sata_enable(struct device *dev)
{
config_t *config = config_of(dev);
u8 reg8;
u16 reg16;
u32 reg32;
southcluster_enable_dev(dev);
/* Port mapping -- mask off SPD + SMS + SC bits, then re-set */
reg16 = pci_read_config16(dev, 0x90);
reg16 &= ~0x03e0;
reg16 |= (config->sata_port_map ^ 0x3) << 8;
if (config->sata_ahci)
reg16 |= 0x60;
pci_write_config16(dev, 0x90, reg16);
/* Set reg 0x94 before starting configuration */
reg32 = pci_read_config32(dev, 0x94);
reg32 &= (u32)(~0x1ff);
reg32 |= 0x183;
pci_write_config32(dev, 0x94, reg32);
/* Set ORM bit */
reg16 = pci_read_config16(dev, 0x92);
reg16 |= (1 << 15);
pci_write_config16(dev, 0x92, reg16);
/* R_PCH_SATA_TM2 - Undocumented in EDS, set according to ref. code */
reg32 = pci_read_config32(dev, 0x98);
reg32 &= (u32)~(0x1f80 | (1 << 6) | (1 << 5));
reg32 |= (1 << 29) | (1 << 25) | (1 << 23) | (1 << 22) |
(1 << 20) | (1 << 19) | (1 << 18) | (1 << 9) | (1 << 5);
pci_write_config32(dev, 0x98, reg32);
/* CMD reg - set bus master enable (BME) */
reg8 = pci_read_config8(dev, 0x04);
reg8 |= (1 << 2);
pci_write_config8(dev, 0x04, reg8);
/* "Test mode registers" */
sir_write(dev, 0x70, 0x00288301);
sir_write(dev, 0x54, 0x00000300);
sir_write(dev, 0x58, 0x50000000);
/* "OOB Detection Margin */
sir_write(dev, 0x6c, 0x130C0603);
/* "Gasket Control" */
sir_write(dev, 0xf4, 0);
/* PCS - Enable requested SATA ports */
reg8 = pci_read_config8(dev, 0x92);
reg8 &= ~0x03;
reg8 |= config->sata_port_map;
pci_write_config8(dev, 0x92, reg8);
}
static struct device_operations sata_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = sata_init,
.enable = sata_enable,
.ops_pci = &soc_pci_ops,
};
static const unsigned short pci_device_ids[] = {
IDE1_DEVID, IDE2_DEVID, /* IDE */
AHCI1_DEVID, AHCI2_DEVID, /* AHCI */
0,
};
static const struct pci_driver baytrail_sata __pci_driver = {
.ops = &sata_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.devices = pci_device_ids,
};
|
