1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010-2017 Advanced Micro Devices, Inc.
* Copyright (C) 2014 Sage Electronic Engineering, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __STONEYRIDGE_H__
#define __STONEYRIDGE_H__
#include <arch/io.h>
#include <types.h>
#include <device/pci_ids.h>
#include <device/device.h>
#include <device/pci_def.h>
#include <soc/iomap.h>
#include "chip.h"
#include <rules.h>
/* PSP at D8F0 */
#define PSP_MAILBOX_BAR PCI_BASE_ADDRESS_4 /* BKDG: "BAR3" */
#define PSP_BAR_ENABLES 0x48
#define PSP_MAILBOX_BAR_EN 0x10
/* Power management registers: 0xfed80300 or index/data at IO 0xcd6/cd7 */
#define PM_PCI_CTRL 0x08
#define FORCE_SLPSTATE_RETRY BIT(25)
#define FORCE_STPCLK_RETRY BIT(24)
#define PM_ACPI_MMIO_EN 0x24
#define PM_SERIRQ_CONF 0x54
#define PM_SERIRQ_NUM_BITS_17 0x0000
#define PM_SERIRQ_NUM_BITS_18 0x0004
#define PM_SERIRQ_NUM_BITS_19 0x0008
#define PM_SERIRQ_NUM_BITS_20 0x000c
#define PM_SERIRQ_NUM_BITS_21 0x0010
#define PM_SERIRQ_NUM_BITS_22 0x0014
#define PM_SERIRQ_NUM_BITS_23 0x0018
#define PM_SERIRQ_NUM_BITS_24 0x001c
#define PM_SERIRQ_MODE BIT(6)
#define PM_SERIRQ_ENABLE BIT(7)
#define PM_EVT_BLK 0x60
#define WAK_STS BIT(15) /*AcpiPmEvtBlkx00 Pm1Status */
#define PCIEXPWAK_STS BIT(14)
#define RTC_STS BIT(10)
#define PWRBTN_STS BIT(8)
#define GBL_STS BIT(5)
#define BM_STS BIT(4)
#define TIMER_STS BIT(0)
#define PCIEXPWAK_DIS BIT(14) /*AcpiPmEvtBlkx02 Pm1Enable */
#define RTC_EN BIT(10)
#define PWRBTN_EN BIT(8)
#define GBL_EN BIT(5)
#define TIMER_STS BIT(0)
#define PM1_CNT_BLK 0x62
#define PM_TMR_BLK 0x64
#define PM_CPU_CTRL 0x66
#define PM_GPE0_BLK 0x68
#define PM_ACPI_SMI_CMD 0x6a
#define PM_ACPI_CONF 0x74
#define PM_ACPI_DECODE_STD BIT(0)
#define PM_ACPI_GLOBAL_EN BIT(1)
#define PM_ACPI_RTC_EN_EN BIT(2)
#define PM_ACPI_TIMER_EN_EN BIT(4)
#define PM_ACPI_MASK_ARB_DIS BIT(6)
#define PM_ACPI_BIOS_RLS BIT(7)
#define PM_ACPI_PWRBTNEN_EN BIT(8)
#define PM_ACPI_REDUCED_HW_EN BIT(9)
#define PM_ACPI_BLOCK_PCIE_PME BIT(24)
#define PM_ACPI_PCIE_WAK_MASK BIT(25)
#define PM_ACPI_WAKE_AS_GEVENT BIT(27)
#define PM_ACPI_NB_PME_GEVENT BIT(28)
#define PM_ACPI_RTC_WAKE_EN BIT(29)
#define PM_RST_CTRL1 0xbe
#define SLPTYPE_CONTROL_EN BIT(5)
#define PM_PMIO_DEBUG 0xd2
#define PM_MANUAL_RESET 0xd3
#define PM_HUD_SD_FLASH_CTRL 0xe7
#define PM_YANG_SD_FLASH_CTRL 0xe8
#define PM_PCIB_CFG 0xea
#define PM_GENINT_DISABLE BIT(0)
#define PM_LPC_GATING 0xec
#define PM_LPC_AB_NO_BYPASS_EN BIT(2)
#define PM_LPC_A20_EN BIT(1)
#define PM_LPC_ENABLE BIT(0)
#define SPIROM_BASE_ADDRESS_REGISTER 0xa0
#define ROUTE_TPM_2_SPI BIT(3)
#define SPI_ABORT_ENABLE BIT(2)
#define SPI_ROM_ENABLE BIT(1)
#define SPI_ROM_ALT_ENABLE BIT(0)
#define SPI_PRESERVE_BITS (BIT(0) | BIT(1) | BIT(2) | BIT(3))
#define LPC_PCI_CONTROL 0x40
#define LEGACY_DMA_EN BIT(2)
#define LPC_IO_PORT_DECODE_ENABLE 0x44
#define DECODE_ENABLE_PARALLEL_PORT0 BIT(0)
#define DECODE_ENABLE_PARALLEL_PORT1 BIT(1)
#define DECODE_ENABLE_PARALLEL_PORT2 BIT(2)
#define DECODE_ENABLE_PARALLEL_PORT3 BIT(3)
#define DECODE_ENABLE_PARALLEL_PORT4 BIT(4)
#define DECODE_ENABLE_PARALLEL_PORT5 BIT(5)
#define DECODE_ENABLE_SERIAL_PORT0 BIT(6)
#define DECODE_ENABLE_SERIAL_PORT1 BIT(7)
#define DECODE_ENABLE_SERIAL_PORT2 BIT(8)
#define DECODE_ENABLE_SERIAL_PORT3 BIT(9)
#define DECODE_ENABLE_SERIAL_PORT4 BIT(10)
#define DECODE_ENABLE_SERIAL_PORT5 BIT(11)
#define DECODE_ENABLE_SERIAL_PORT6 BIT(12)
#define DECODE_ENABLE_SERIAL_PORT7 BIT(13)
#define DECODE_ENABLE_AUDIO_PORT0 BIT(14)
#define DECODE_ENABLE_AUDIO_PORT1 BIT(15)
#define DECODE_ENABLE_AUDIO_PORT2 BIT(16)
#define DECODE_ENABLE_AUDIO_PORT3 BIT(17)
#define DECODE_ENABLE_MIDI_PORT0 BIT(18)
#define DECODE_ENABLE_MIDI_PORT1 BIT(19)
#define DECODE_ENABLE_MIDI_PORT2 BIT(20)
#define DECODE_ENABLE_MIDI_PORT3 BIT(21)
#define DECODE_ENABLE_MSS_PORT0 BIT(22)
#define DECODE_ENABLE_MSS_PORT1 BIT(23)
#define DECODE_ENABLE_MSS_PORT2 BIT(24)
#define DECODE_ENABLE_MSS_PORT3 BIT(25)
#define DECODE_ENABLE_FDC_PORT0 BIT(26)
#define DECODE_ENABLE_FDC_PORT1 BIT(27)
#define DECODE_ENABLE_GAME_PORT BIT(28)
#define DECODE_ENABLE_KBC_PORT BIT(29)
#define DECODE_ENABLE_ACPIUC_PORT BIT(30)
#define DECODE_ENABLE_ADLIB_PORT BIT(31)
#define LPC_IO_OR_MEM_DECODE_ENABLE 0x48
#define LPC_WIDEIO2_ENABLE BIT(25)
#define LPC_WIDEIO1_ENABLE BIT(24)
#define DECODE_IO_PORT_ENABLE6 BIT(23)
#define DECODE_IO_PORT_ENABLE5 BIT(22)
#define DECODE_IO_PORT_ENABLE4 BIT(21)
#define DECODE_IO_PORT_ENABLE3 BIT(19)
#define DECODE_IO_PORT_ENABLE2 BIT(18)
#define DECODE_IO_PORT_ENABLE1 BIT(17)
#define DECODE_IO_PORT_ENABLE0 BIT(16)
#define LPC_SYNC_TIMEOUT_COUNT_ENABLE BIT(7)
#define LPC_WIDEIO0_ENABLE BIT(2)
/* Assuming word access to higher word (register 0x4a) */
#define LPC_IO_OR_MEM_DEC_EN_HIGH 0x4a
#define LPC_WIDEIO2_ENABLE_H BIT(9)
#define LPC_WIDEIO1_ENABLE_H BIT(8)
#define DECODE_IO_PORT_ENABLE6_H BIT(7)
#define DECODE_IO_PORT_ENABLE5_H BIT(6)
#define DECODE_IO_PORT_ENABLE4_H BIT(5)
#define DECODE_IO_PORT_ENABLE3_H BIT(3)
#define DECODE_IO_PORT_ENABLE2_H BIT(2)
#define DECODE_IO_PORT_ENABLE1_H BIT(1)
#define DECODE_IO_PORT_ENABLE0_H BIT(0)
/*
* Register 0x64 is 32-bit, composed by two 16-bit sub-registers.
* For ease of access, each sub-register is declared separetely.
*/
#define LPC_WIDEIO_GENERIC_PORT 0x64
#define LPC_WIDEIO1_GENERIC_PORT 0x66
#define ROM_ADDRESS_RANGE1_START 0x68
#define ROM_ADDRESS_RANGE1_END 0x6a
#define ROM_ADDRESS_RANGE2_START 0x6c
#define ROM_ADDRESS_RANGE2_END 0x6e
#define LPC_ALT_WIDEIO_RANGE_ENABLE 0x74
#define LPC_ALT_WIDEIO2_ENABLE BIT(3)
#define LPC_ALT_WIDEIO1_ENABLE BIT(2)
#define LPC_ALT_WIDEIO0_ENABLE BIT(0)
#define LPC_MISC_CONTROL_BITS 0x78
#define LPC_NOHOG BIT(0)
#define LPC_WIDEIO2_GENERIC_PORT 0x90
/*
* LPC register 0xb8 is DWORD, here there are definitions for byte
* access. For example, bits 31-24 are accessed through byte access
* at register 0xbb ().
*/
#define LPC_ROM_DMA_EC_HOST_CONTROL 0xb8
#define LPC_HOST_CONTROL 0xbb
#define SPI_FROM_HOST_PREFETCH_EN BIT(0)
/* SPI Controller */
#define SPI_CNTRL0 0x00
#define SPI_BUSY BIT(31)
#define SPI_READ_MODE_MASK (BIT(30) | BIT(29) | BIT(18))
/* Nominal is 16.7MHz on older devices, 33MHz on newer */
#define SPI_READ_MODE_NOM 0x00000000
#define SPI_READ_MODE_DUAL112 ( BIT(29) )
#define SPI_READ_MODE_QUAD114 ( BIT(29) | BIT(18))
#define SPI_READ_MODE_DUAL122 (BIT(30) )
#define SPI_READ_MODE_QUAD144 (BIT(30) | BIT(18))
#define SPI_READ_MODE_NORMAL66 (BIT(30) | BIT(29) )
#define SPI_READ_MODE_FAST (BIT(30) | BIT(29) | BIT(18))
#define SPI_FIFO_PTR_CLR BIT(20)
#define SPI_ARB_ENABLE BIT(19)
#define EXEC_OPCODE BIT(16)
#define SPI_CNTRL1 0x0c
#define SPI_CMD_CODE 0x45
#define SPI_CMD_TRIGGER 0x47
#define SPI_CMD_TRIGGER_EXECUTE (BIT(7))
#define SPI_TX_BYTE_COUNT 0x48
#define SPI_RX_BYTE_COUNT 0x4B
#define SPI_STATUS 0x4c
#define SPI_DONE_BYTE_COUNT_SHIFT 0
#define SPI_DONE_BYTE_COUNT_MASK 0xff
#define SPI_FIFO_WR_PTR_SHIFT 8
#define SPI_FIFO_WR_PTR_MASK 0x7f
#define SPI_FIFO_RD_PTR_SHIFT 16
#define SPI_FIFO_RD_PTR_MASK 0x7f
#define SPI_FIFO 0x80
#define SPI_FIFO_DEPTH (0xc7 - SPI_FIFO)
#define SPI100_SPEED_CONFIG 0x22
/* Use SPI_SPEED_16M-SPI_SPEED_66M below for the southbridge */
#define SPI_CNTRL1_SPEED_MASK (BIT(15) | BIT(14) | BIT(13) | BIT(12))
#define SPI_NORM_SPEED_SH 12
#define SPI_FAST_SPEED_SH 8
#define SPI100_ENABLE 0x20
#define SPI_USE_SPI100 BIT(0)
#define SPI100_SPEED_CONFIG 0x22
#define SPI_SPEED_66M (0x0)
#define SPI_SPEED_33M ( BIT(0))
#define SPI_SPEED_22M ( BIT(1) )
#define SPI_SPEED_16M ( BIT(1) | BIT(0))
#define SPI_SPEED_100M (BIT(2) )
#define SPI_SPEED_800K (BIT(2) | BIT(0))
#define SPI_NORM_SPEED_NEW_SH 12
#define SPI_FAST_SPEED_NEW_SH 8
#define SPI_ALT_SPEED_NEW_SH 4
#define SPI_TPM_SPEED_NEW_SH 0
#define SPI100_HOST_PREF_CONFIG 0x2c
#define SPI_RD4DW_EN_HOST BIT(15)
#define FCH_MISC_REG40_OSCOUT1_EN BIT(2)
/* IO 0xcf9 - Reset control port*/
#define FULL_RST BIT(3)
#define RST_CMD BIT(2)
#define SYS_RST BIT(1)
/* PMx10 - Power Reset Config */
#define PWR_RESET_CFG 0x10
#define TOGGLE_ALL_PWR_GOOD BIT(1)
#define XHCI_PM_INDIRECT_INDEX 0x48
#define XHCI_PM_INDIRECT_DATA 0x4C
#define XHCI_OVER_CURRENT_CONTROL 0x30
#define EHCI_OVER_CURRENT_CONTROL 0x70
#define USB_OC0 0
#define USB_OC1 1
#define USB_OC2 2
#define USB_OC3 3
#define USB_OC4 4
#define USB_OC5 5
#define USB_OC6 6
#define USB_OC7 7
#define USB_OC_DISABLE 0xf
#define USB_OC_DISABLE_ALL 0xffff
#define OC_PORT0_SHIFT 0
#define OC_PORT1_SHIFT 4
#define OC_PORT2_SHIFT 8
#define OC_PORT3_SHIFT 12
#define WIDEIO_RANGE_ERROR -1
#define TOTAL_WIDEIO_PORTS 3
#define AMD_GPIO_MUX_MASK 0x03
#if ENV_BOOTBLOCK
#define GPIO_TABLE_BOOTBLOCK 1
#else
#define GPIO_TABLE_BOOTBLOCK 0
#endif
#define STR_GPIO_STAGE ENV_STRING
struct soc_amd_stoneyridge_gpio {
uint8_t gpio;
uint8_t function;
uint8_t control;
};
void sb_enable_rom(void);
void configure_stoneyridge_uart(void);
void sb_clk_output_48Mhz(void);
void sb_disable_4dw_burst(void);
void sb_enable(device_t dev);
void southbridge_final(void *chip_info);
void southbridge_init(void *chip_info);
void sb_lpc_port80(void);
void sb_lpc_decode(void);
void sb_pci_port80(void);
void sb_read_mode(u32 mode);
void sb_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm);
void sb_set_readspeed(u16 norm, u16 fast);
void sb_tpm_decode_spi(void);
void lpc_wideio_512_window(uint16_t base);
void lpc_wideio_16_window(uint16_t base);
u8 pm_read8(u8 reg);
u16 pm_read16(u8 reg);
u32 pm_read32(u8 reg);
void pm_write8(u8 reg, u8 value);
void pm_write16(u8 reg, u16 value);
void pm_write32(u8 reg, u32 value);
uint8_t smi_read8(uint8_t offset);
uint16_t smi_read16(uint8_t offset);
uint32_t smi_read32(uint8_t offset);
void smi_write8(uint8_t offset, uint8_t value);
void smi_write16(uint8_t offset, uint16_t value);
void smi_write32(uint8_t offset, uint32_t value);
uint8_t biosram_read8(uint8_t offset);
void biosram_write8(uint8_t offset, uint8_t value);
uint16_t biosram_read16(uint8_t offset);
void biosram_write16(uint8_t offset, uint16_t value);
uint32_t biosram_read32(uint8_t offset);
void biosram_write32(uint8_t offset, uint32_t value);
uint16_t pm_acpi_pm_cnt_blk(void);
uint16_t pm_acpi_pm_evt_blk(void);
void xhci_pm_write8(uint8_t reg, uint8_t value);
uint8_t xhci_pm_read8(uint8_t reg);
void xhci_pm_write16(uint8_t reg, uint16_t value);
uint16_t xhci_pm_read16(uint8_t reg);
void xhci_pm_write32(uint8_t reg, uint32_t value);
uint32_t xhci_pm_read32(uint8_t reg);
void bootblock_fch_early_init(void);
/**
* @brief get table and table size to program GPIO
*
* @param size = pointer to variable where to return table size
*
* @return pointer to the desired table
*/
const struct soc_amd_stoneyridge_gpio *board_get_gpio(size_t *size);
/**
* @brief program a particular set of GPIO
*
* @return none
*/
void sb_program_gpio(void);
/**
* @brief Find the size of a particular wide IO
*
* @param index = index of desired wide IO
*
* @return size of desired wide IO
*/
uint16_t sb_wideio_size(int index);
/**
* @brief Identify if any LPC wide IO is covering the IO range
*
* @param start = start of IO range
* @param size = size of IO range
*
* @return Index of wide IO covering the range or error
*/
int sb_find_wideio_range(uint16_t start, uint16_t size);
/**
* @brief Program a LPC wide IO to support an IO range
*
* @param start = start of range to be routed through wide IO
* @param size = size of range to be routed through wide IO
*
* @return Index of wide IO register used or error
*/
int sb_set_wideio_range(uint16_t start, uint16_t size);
/*
* Call the mainboard to get the USB Over Current Map. The mainboard
* returns the map and 0 on Success or -1 on error or no map. There is
* a default weak function in usb.c if the mainboard doesn't have any
* over current support.
*/
int mainboard_get_xhci_oc_map(uint16_t *usb_oc_map);
int mainboard_get_ehci_oc_map(uint16_t *usb_oc_map);
/* Initialize all the i2c buses that are marked with early init. */
void i2c_soc_early_init(void);
#endif /* __STONEYRIDGE_H__ */
|