1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007-2009 coresystems GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
// other bioses use this, too:
#define SMBUS_IO_BASE 0x0500
#define SMBHSTSTAT SMBUS_IO_BASE + 0x0
#define SMBSLVSTAT SMBUS_IO_BASE + 0x1
#define SMBHSTCTL SMBUS_IO_BASE + 0x2
#define SMBHSTCMD SMBUS_IO_BASE + 0x3
#define SMBXMITADD SMBUS_IO_BASE + 0x4
#define SMBHSTDAT0 SMBUS_IO_BASE + 0x5
#define SMBHSTDAT1 SMBUS_IO_BASE + 0x6
#define SMBBLKDAT SMBUS_IO_BASE + 0x7
#define SMBSLVCTL SMBUS_IO_BASE + 0x8
#define SMBTRNSADD SMBUS_IO_BASE + 0x9
#define SMBSLVDATA SMBUS_IO_BASE + 0xa
#define SMLINK_PIN_CTL SMBUS_IO_BASE + 0xe
#define SMBUS_PIN_CTL SMBUS_IO_BASE + 0xf
/* Define register settings */
#define HOST_RESET 0xff
#define READ_CMD 0x01 // 1 in the 0 bit of SMBHSTADD states to READ
#define SMBUS_TIMEOUT (100*1000*10)
#define I2C_TRANS_CMD 0x40
#define CLOCK_SLAVE_ADDRESS 0x69
#define SMBUS_DELAY() outb(0x80, 0x80)
/* Internal functions */
#if CONFIG_DEBUG_SMBUS
static void smbus_print_error(unsigned char host_status_register, int loops)
{
/* Check if there actually was an error */
if (host_status_register == 0x00 || host_status_register == 0x40 ||
host_status_register == 0x42)
return;
printk(BIOS_ERR, "SMBus Error: %02x\n", host_status_register);
if (loops >= SMBUS_TIMEOUT) {
printk(BIOS_ERR, "SMBus Timout\n");
}
if (host_status_register & (1 << 4)) {
printk(BIOS_ERR, "Interrup/SMI# was Failed Bus Transaction\n");
}
if (host_status_register & (1 << 3)) {
printk(BIOS_ERR, "Bus Error\n");
}
if (host_status_register & (1 << 2)) {
printk(BIOS_ERR, "Device Error\n");
}
if (host_status_register & (1 << 1)) {
/* This isn't a real error... */
printk(BIOS_DEBUG, "Interrupt/SMI# was Successful Completion\n");
}
if (host_status_register & (1 << 0)) {
printk(BIOS_ERR, "Host Busy\n");
}
}
#endif
static void smbus_wait_until_ready(void)
{
int loops;
loops = 0;
/* Yes, this is a mess, but it's the easiest way to do it */
while (((inb(SMBHSTSTAT) & 1) == 1) && (loops <= SMBUS_TIMEOUT)) {
SMBUS_DELAY();
++loops;
}
#if CONFIG_DEBUG_SMBUS
/* Some systems seem to have a flakey SMBus. No need to spew a lot of
* errors on those, once we know that SMBus access is principally
* working.
*/
smbus_print_error(inb(SMBHSTSTAT), loops);
#endif
}
static void smbus_reset(void)
{
outb(HOST_RESET, SMBHSTSTAT);
}
/* Public functions */
static void set_ics_data(unsigned char dev, int data, char len)
{
smbus_reset();
/* clear host data port */
outb(0x00, SMBHSTDAT0);
SMBUS_DELAY();
smbus_wait_until_ready();
/* read to reset block transfer counter */
inb(SMBHSTCTL);
/* fill blocktransfer array */
if (dev == 0xd2) {
outb(0x0d, SMBBLKDAT);
outb(0x00, SMBBLKDAT);
outb(0x3f, SMBBLKDAT);
outb(0xcd, SMBBLKDAT);
outb(0x7f, SMBBLKDAT);
outb(0xbf, SMBBLKDAT);
outb(0x1a, SMBBLKDAT);
outb(0x2a, SMBBLKDAT);
outb(0x01, SMBBLKDAT);
outb(0x0f, SMBBLKDAT);
outb(0x0b, SMBBLKDAT);
outb(0x80, SMBBLKDAT);
outb(0x8d, SMBBLKDAT);
outb(0x9b, SMBBLKDAT);
} else {
outb(0x08, SMBBLKDAT);
outb(0xff, SMBBLKDAT);
outb(0x3f, SMBBLKDAT);
outb(0x00, SMBBLKDAT);
outb(0x00, SMBBLKDAT);
outb(0xff, SMBBLKDAT);
outb(0xff, SMBBLKDAT);
outb(0xff, SMBBLKDAT);
outb(0xff, SMBBLKDAT);
}
outb(dev, SMBXMITADD);
outb(0, SMBHSTCMD);
outb(len, SMBHSTDAT0);
outb(0x74, SMBHSTCTL);
SMBUS_DELAY();
smbus_wait_until_ready();
smbus_reset();
}
static unsigned int get_spd_data(const struct mem_controller *ctrl, unsigned int dimm,
unsigned int offset)
{
unsigned int val, addr;
smbus_reset();
/* clear host data port */
outb(0x00, SMBHSTDAT0);
SMBUS_DELAY();
smbus_wait_until_ready();
/* Fetch the SMBus address of the SPD ROM from
* the ctrl struct in romstage.c in case they are at
* non-standard positions.
* SMBus Address shifted by 1
*/
addr = (ctrl->channel0[dimm]) << 1;
outb(addr | 0x1, SMBXMITADD);
outb(offset, SMBHSTCMD);
outb(0x48, SMBHSTCTL);
SMBUS_DELAY();
smbus_wait_until_ready();
val = inb(SMBHSTDAT0);
smbus_reset();
return val;
}
static void enable_smbus(void)
{
device_t dev;
/* The CX700 ISA Bridge (0x1106, 0x8324) is hardcoded to this location,
* no need to probe.
*/
dev = PCI_DEV(0, 17, 0);
/* SMBus Clock Select: Divider fof 14.318MHz */
pci_write_config8(dev, 0x94, 0x20);
/* SMBus I/O Base, enable SMBus */
pci_write_config16(dev, 0xd0, SMBUS_IO_BASE | 1);
/* SMBus Clock from 128K Source, Enable SMBus Host Controller */
pci_write_config8(dev, 0xd2, 0x05);
/* Enable I/O decoding */
pci_write_config16(dev, 0x04, 0x0003);
/* Setup clock chips */
set_ics_data(0xd2, 0, 14);
set_ics_data(0xd4, 0, 9);
}
/* Debugging Function */
#if CONFIG_DEBUG_SMBUS
static void dump_spd_data(const struct mem_controller *ctrl)
{
int dimm, offset, regs;
unsigned int val;
for (dimm = 0; dimm < DIMM_SOCKETS; dimm++) {
printk(BIOS_DEBUG, "SPD Data for DIMM %02x\n", dimm);
val = get_spd_data(ctrl, dimm, 0);
if (val == 0xff) {
regs = 256;
} else if (val == 0x80) {
regs = 128;
} else {
printk(BIOS_DEBUG, "No DIMM present\n");
regs = 0;
}
for (offset = 0; offset < regs; offset++) {
printk(BIOS_DEBUG, " Offset %02x = 0x%02x\n",
offset, get_spd_data(ctrl, dimm, offset));
}
}
}
#else
#define dump_spd_data(ctrl)
#endif
|
