path: root/src/northbridge/amd/amdht/h3finit.h

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
 * Copyright (C) 2007 Advanced Micro Devices, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#ifndef H3FINIT_H
#define H3FINIT_H

/*----------------------------------------------------------------------------
 *	Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
 *
 *----------------------------------------------------------------------------
 */

/*-----------------------------------------------------------------------------
 *			DEFINITIONS AND MACROS
 *
 *-----------------------------------------------------------------------------
 */

/* Width equates for call backs */
#define HT_WIDTH_8_BITS	8
#define HT_WIDTH_16_BITS	16
#define HT_WIDTH_4_BITS	4
#define HT_WIDTH_2_BITS	2

/* Frequency equates for call backs which take an actual frequency setting */
#define HT_FREQUENCY_200M	0
#define HT_FREQUENCY_400M	2
#define HT_FREQUENCY_600M	4
#define HT_FREQUENCY_800M	5
#define HT_FREQUENCY_1000M	6
#define HT_FREQUENCY_1200M	7
#define HT_FREQUENCY_1400M	8
#define HT_FREQUENCY_1600M	9
#define HT_FREQUENCY_1800M	10
#define HT_FREQUENCY_2000M	11
#define HT_FREQUENCY_2200M	12
#define HT_FREQUENCY_2400M	13
#define HT_FREQUENCY_2600M	14
#define HT_FREQUENCY_2800M	17
#define HT_FREQUENCY_3000M	18
#define HT_FREQUENCY_3200M	19

/* Frequency Limit equates for call backs which take a frequency supported mask. */
#define HT_FREQUENCY_LIMIT_200M	1
#define HT_FREQUENCY_LIMIT_400M	7
#define HT_FREQUENCY_LIMIT_600M	0x1F
#define HT_FREQUENCY_LIMIT_800M	0x3F
#define HT_FREQUENCY_LIMIT_1000M	0x7F
#define HT_FREQUENCY_LIMIT_HT1_ONLY	0x7F
#define HT_FREQUENCY_LIMIT_1200M	0xFF
#define HT_FREQUENCY_LIMIT_1400M	0x1FF
#define HT_FREQUENCY_LIMIT_1600M	0x3FF
#define HT_FREQUENCY_LIMIT_1800M	0x7FF
#define HT_FREQUENCY_LIMIT_2000M	0xFFF
#define HT_FREQUENCY_LIMIT_2200M	0x1FFF
#define HT_FREQUENCY_LIMIT_2400M	0x3FFF
#define HT_FREQUENCY_LIMIT_2600M	0x7FFF
#define HT_FREQUENCY_LIMIT_2800M	0x3FFFF
#define HT_FREQUENCY_LIMIT_3000M	0x7FFFF
#define HT_FREQUENCY_LIMIT_3200M	0xFFFFF

/*
 * Event Notify definitions
 */

/* Event Class definitions */
#define HT_EVENT_CLASS_CRITICAL	1
#define HT_EVENT_CLASS_ERROR		2
#define HT_EVENT_CLASS_HW_FAULT	3
#define HT_EVENT_CLASS_WARNING		4
#define HT_EVENT_CLASS_INFO		5

/* Event definitions. */

/* Coherent subfunction events */
#define HT_EVENT_COH_EVENTS		0x1000
#define HT_EVENT_COH_NO_TOPOLOGY	0x1001
#define HT_EVENT_COH_LINK_EXCEED	0x1002
#define HT_EVENT_COH_FAMILY_FEUD	0x1003
#define HT_EVENT_COH_NODE_DISCOVERED	0x1004
#define HT_EVENT_COH_MPCAP_MISMATCH	0x1005

/* Non-coherent subfunction events */
#define HT_EVENT_NCOH_EVENTS		0x2000
#define HT_EVENT_NCOH_BUID_EXCEED	0x2001
#define HT_EVENT_NCOH_LINK_EXCEED	0x2002
#define HT_EVENT_NCOH_BUS_MAX_EXCEED	0x2003
#define HT_EVENT_NCOH_CFG_MAP_EXCEED	0x2004
#define HT_EVENT_NCOH_DEVICE_FAILED	0x2005
#define HT_EVENT_NCOH_AUTO_DEPTH	0x2006

/* Optimization subfunction events */
#define HT_EVENT_OPT_EVENTS			0x3000
#define HT_EVENT_OPT_REQUIRED_CAP_RETRY	0x3001
#define HT_EVENT_OPT_REQUIRED_CAP_GEN3		0x3002

/* HW Fault events */
#define HT_EVENT_HW_EVENTS	0x4000
#define HT_EVENT_HW_SYNCHFLOOD	0x4001
#define HT_EVENT_HW_HTCRC	0x4002

/* The bbHT component (hb*) uses 0x5000 for events.
 * For consistency, we avoid that range here.
 */

/*----------------------------------------------------------------------------
 *			TYPEDEFS, STRUCTURES, ENUMS
 *
 *----------------------------------------------------------------------------
 */

typedef struct {
	u8 **topolist;
	u8 AutoBusStart;
	/* Note: This should always be the form AutoBusCurrent+N*AutoBusIncrement, also bus 253-255 are reserved */
	u8 AutoBusMax;
	u8 AutoBusIncrement;

	/**----------------------------------------------------------------------------------------
	 *
	 * BOOL
	 * AMD_CB_IgnoreLink(u8 Node, u8 Link)
	 *
	 * Description:
	 *	This routine is called every time a coherent link is found and then every
	 *	time a non-coherent link from a CPU is found.
	 *	Any coherent or non-coherent link from a CPU can be ignored and not used
	 *	for discovery or initialization.  Useful for connection based systems.
	 *	(Note: not called for IO device to IO Device links.)
	 *
	 * Parameters:
	 *	@param[in]   u8   node   = The node on which this link is located
	 *	@param[in]   u8   link   = The link about to be initialized
	 *	@param[out]  BOOL result = true to ignore this link and skip it
	 *				   false to initialize the link normally
	 *
	 * ---------------------------------------------------------------------------------------
	 */
	BOOL (*AMD_CB_IgnoreLink)(u8 Node, u8 Link);

	/**----------------------------------------------------------------------------------------
	 *
	 * BOOL
	 * AMD_CB_OverrideBusNumbers(u8 Node, u8 Link, u8 *SecBus, u8 *SubBus)
	 *
	 * Description:
	 *	This routine is called every time a non-coherent chain is processed.
	 *	If a system can not use the auto Bus numbering feature for non-coherent chain bus
	 *	assignments, this routine can provide explicit control.  For each chain, provide
	 *	the bus number range to use.
	 *
	 * Parameters:
	 *	@param[in]  u8   node   = The node on which this chain is located
	 *	@param[in]  u8   link   = The link on the host for this chain
	 *	@param[out] u8   secBus = Secondary Bus number for this non-coherent chain
	 *	@param[out] u8*  subBus = Subordinate Bus number
	 *	@param[out] BOOL result = true this routine is supplying the bus numbers
	 *				  false use auto Bus numbering
	 *
	 * ---------------------------------------------------------------------------------------
	 */
	BOOL (*AMD_CB_OverrideBusNumbers)(u8 Node, u8 Link, u8 *SecBus, u8 *SubBus);

	/**----------------------------------------------------------------------------------------
	 *
	 * BOOL
	 * AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List)
	 *
	 * Description:
	 *	This routine is called every time a non-coherent chain is processed.
	 *	BUID assignment may be controlled explicitly on a non-coherent chain. Provide a
	 *	swap list. The first part of the list controls the BUID assignment and the
	 *	second part of the list provides the device to device linking.  Device orientation
	 *	can be detected automatically, or explicitly.  See documentation for more details.
	 *
	 *	Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially
	 *	based on each device's unit count.
	 *
	 * Parameters:
	 *	@param[in]  u8  node    = The node on which this chain is located
	 *	@param[in]  u8  link    = The link on the host for this chain
	 *	@param[out] u8** list   = supply a pointer to a list
	 *	@param[out] BOOL result = true to use a manual list
	 *				  false to initialize the link automatically
	 *
	 * ---------------------------------------------------------------------------------------
	 */
	BOOL (*AMD_CB_ManualBUIDSwapList)(u8 Node, u8 Link, const u8 **List);

	/**----------------------------------------------------------------------------------------
	 *
	 * void
	 * AMD_CB_DeviceCapOverride(u8 HostNode, u8 HostLink, u8 Depth, u8 Segment,
	 *				  u8 Bus, u8 Dev, u32 DevVenID, u8 Link,
	 *				  u8 *LinkWidthIn, u8 *LinkWidthOut, u16 *FreqCap)
	 *
	 * Description:
	 *	This routine is called once for every link on every IO device.
	 *	Update the width and frequency capability if needed for this device.
	 *	This is used along with device capabilities, the limit call backs, and northbridge
	 *	limits to compute the default settings.  The components of the device's PCI config
	 *	address are provided, so its settings can be consulted if need be. The input width
	 *	and frequency are the reported device capabilities.
	 *
	 * Parameters:
	 *	@param[in]  u8  hostNode  = The node on which this chain is located
	 *	@param[in]  u8  hostLink  = The link on the host for this chain
	 *	@param[in]  u8  Depth     = The depth in the I/O chain from the Host
	 *	@param[in]  u8  Segment   = The Device's PCI Bus Segment number
	 *	@param[in]  u8  Bus       = The Device's PCI Bus number
	 *	@param[in]  u8  Dev       = The Device's PCI device Number
	 *	@param[in]  u32 DevVenID  = The Device's PCI Vendor + Device ID (offset 0x00)
	 *	@param[in]  u8  Link      = The Device's link number (0 or 1)
	 *	@param[in,out] u8*  LinkWidthIn  = modify to change the Link Witdh In
	 *	@param[in,out] u8*  LinkWidthOut  = modify to change the Link Witdh Out
	 *	@param[in,out] u32* FreqCap = modify to change the link's frequency capability
	 *	@param[in,out] u32* FeatureCap = modify to change the link's feature capability
	 *
	 * ---------------------------------------------------------------------------------------
	 */
	void (*AMD_CB_DeviceCapOverride)(
		u8 HostNode,
		u8 HostLink,
		u8 Depth,
		u8 Segment,
		u8 Bus,
		u8 Dev,
		u32 DevVenID,
		u8 Link,
		u8 *LinkWidthIn,
		u8 *LinkWidthOut,
		u32 *FreqCap,
		u32 *FeatureCap
	);

	/**----------------------------------------------------------------------------------------
	 *
	 * void
	 * AMD_CB_Cpu2CpuPCBLimits(u8 NodeA, u8 LinkA, u8 NodeB, u8 LinkB,
	 *				 u8 *ABLinkWidthLimit, u8 *BALinkWidthLimit, u16 *PCBFreqCap)
	 *
	 * Description:
	 *	For each coherent connection this routine is called once.
	 *	Update the frequency and width if needed for this link (usually based on board
	 *	restriction).  This is used with CPU device capabilities and northbridge limits
	 *	to compute the default settings.  The input width and frequency are valid, but do
	 *	not necessarily reflect the minimum setting that will be chosen.
	 *
	 * Parameters:
	 *	@param[in]  u8  nodeA  = One node on which this link is located
	 *	@param[in]  u8  linkA  = The link on this node
	 *	@param[in]  u8  nodeB  = The other node on which this link is located
	 *	@param[in]  u8  linkB  = The link on that node
	 *	@param[in,out]  u8*  ABLinkWidthLimit = modify to change the Link Witdh In
	 *	@param[in,out]  u8*  BALinkWidthLimit = modify to change the Link Witdh Out
	 *	@param[in,out]  u32* PCBFreqCap  = modify to change the link's frequency capability
	 *
	 * ---------------------------------------------------------------------------------------
	 */
	void (*AMD_CB_Cpu2CpuPCBLimits)(
		u8 NodeA,
		u8 LinkA,
		u8 NodeB,
		u8 LinkB,
		u8 *ABLinkWidthLimit,
		u8 *BALinkWidthLimit,
		u32 *PCBFreqCap
	);

	/**----------------------------------------------------------------------------------------
	 *
	 * void
	 * AMD_CB_IOPCBLimits(u8 HostNode, u8 HostLink, u8 Depth, u8 *DownstreamLinkWidthLimit,
	 *			    u8 *UpstreamLinkWidthLimit, u16 *PCBFreqCap)
	 *
	 * Description:
	 *	For each non-coherent connection this routine is called once.
	 *	Update the frequency and width if needed for this link (usually based on board
	 *	restriction).  This is used with device capabilities, device overrides, and northbridge limits
	 *	to compute the default settings. The input width and frequency are valid, but do
	 *	not necessarily reflect the minimum setting that will be chosen.
	 *
	 * Parameters:
	 *	@param[in]  u8  hostNode  = The node on which this link is located
	 *	@param[in]  u8  hostLink  = The link about to be initialized
	 *	@param[in]  u8  Depth  = The depth in the I/O chain from the Host
	 *	@param[in,out]  u8* DownstreamLinkWidthLimit = modify to change the Link Witdh In
	 *	@param[in,out]  u8* UpstreamLinkWidthLimit  = modify to change the Link Witdh Out
	 *	@param[in,out]  u32* PCBFreqCap = modify to change the link's frequency capability
	 *
	 * ---------------------------------------------------------------------------------------
	 */
	void (*AMD_CB_IOPCBLimits)(
		u8 HostNode,
		u8 HostLink,
		u8 Depth,
		u8 *DownstreamLinkWidthLimit,
		u8 *UpstreamLinkWidthLimit,
		u32 *PCBFreqCap
	);

	/**----------------------------------------------------------------------------------------
	 *
	 * BOOL
	 * AMD_CB_SkipRegang(u8 NodeA, u8 LinkA, u8 NodeB, u8 LinkB)
	 *
	 * Description:
	 *	This routine is called whenever two sublinks are both connected to the same CPUs.
	 *	Normally, unganged subsinks between the same two CPUs are reganged.
	 *	Return true from this routine to leave the links unganged.
	 *
	 * Parameters:
	 *	@param[in]  u8  nodeA   = One node on which this link is located
	 *	@param[in]  u8  linkA   = The link on this node
	 *	@param[in]  u8  nodeB   = The other node on which this link is located
	 *	@param[in]  u8  linkB   = The link on that node
	 *	@param[out] BOOL result = true to leave link unganged
	 *				  false to regang link automatically
	 *
	 * ---------------------------------------------------------------------------------------
	 */
	BOOL (*AMD_CB_SkipRegang)(
		u8 NodeA,
		u8 LinkA,
		u8 NodeB,
		u8 LinkB
	);

	/**----------------------------------------------------------------------------------------
	 *
	 * BOOL
	 * AMD_CB_CustomizeTrafficDistribution()
	 *
	 * Description:
	 *	Near the end of HT initialization, this routine is called once.
	 *	If this routine will handle traffic distribution in a proprietary way,
	 *	after detecting which links to distribute traffic on and configuring the system,
	 *	return true. Return false to let the HT code detect and do traffic distribution
	 *	This routine can also be used to simply turn this feature off, or to pre-process
	 *	the system before normal traffic distribution.
	 *
	 * Parameters:
	 *	@param[out]  BOOL result  = true skip traffic distribution
	 *				    false do normal traffic distribution
	 *
	 * ---------------------------------------------------------------------------------------
	 */
	BOOL (*AMD_CB_CustomizeTrafficDistribution)(void);


	/**----------------------------------------------------------------------------------------
	 *
	 * BOOL
	 * AMD_CB_CustomizeBuffers(u8 Node)
	 *
	 * Description:
	 *	Near the end of HT initialization, this routine is called once per CPU node.
	 *	Implement proprietary buffer tuning and return true, or return false for normal tuning.
	 *	This routine can also be used to simply turn this feature off, or to pre-process
	 *	the system before normal tuning.
	 *
	 * Parameters:
	 *	@param[in] u8 node  = buffer allocation may apply to this node
	 *	@param[out] BOOL  result  = true skip buffer allocation on this node
	 *				    false tune buffers normally
	 *
	 * ---------------------------------------------------------------------------------------
	 */
	BOOL (*AMD_CB_CustomizeBuffers)(u8 node);

	/**----------------------------------------------------------------------------------------
	 *
	 * void
	 * AMD_CB_OverrideDevicePort(u8 HostNode, u8 HostLink, u8 Depth, u8 *LinkWidthIn,
	 *				   u8 *LinkWidthOut, u16 *LinkFrequency)
	 *
	 * Description:
	 *	Called once for each active link on each IO device.
	 *	Provides an opportunity to directly control the frequency and width,
	 *	intended for test and debug.  The input frequency and width will be used
	 *	if not overridden.
	 *
	 * Parameters:
	 *	@param[in]  u8   hostNode  = The node on which this link is located
	 *	@param[in]  u8   hostLink  = The link about to be initialized
	 *	@param[in]  u8   Depth     = The depth in the I/O chain from the Host
	 *	@param[in]  u8   Link      = the link on the device (0 or 1)
	 *	@param[in,out]  u8*   LinkWidthIn    = modify to change the Link Witdh In
	 *	@param[in,out]  u8*   LinkWidthOut   = modify to change the Link Witdh Out
	 *	@param[in,out]  u16*   LinkFrequency = modify to change the link's frequency capability
	 *
	 * ---------------------------------------------------------------------------------------
	 */
	void (*AMD_CB_OverrideDevicePort)(
		u8 HostNode,
		u8 HostLink,
		u8 Depth,
		u8 Link,
		u8 *LinkWidthIn,
		u8 *LinkWidthOut,
		u8 *LinkFrequency
	);

	/**----------------------------------------------------------------------------------------
	 *
	 * void
	 * AMD_CB_OverrideCpuPort(u8 Node, u8 Link, u8 *LinkWidthIn, u8 *LinkWidthOut,
	 *				u16 *LinkFrequency)
	 *
	 * Description:
	 *	Called once for each active link on each CPU.
	 *	Provides an opportunity to directly control the frequency and width,
	 *	intended for test and debug. The input frequency and width will be used
	 *	if not overridden.
	 *
	 * Parameters:
	 *	@param[in]  u8  node  = One node on which this link is located
	 *	@param[in]  u8  link  = The link on this node
	 *	@param[in,out]  u8*  LinkWidthIn = modify to change the Link Witdh In
	 *	@param[in,out]  u8*  LinkWidthOut = modify to change the Link Witdh Out
	 *	@param[in,out]  u16*  LinkFrequency  = modify to change the link's frequency capability
	 *
	 *---------------------------------------------------------------------------------------
	 */
	void (*AMD_CB_OverrideCpuPort)(
		u8 Node,
		u8 Link,
		u8 *LinkWidthIn,
		u8 *LinkWidthOut,
		u8 *LinkFrequency
	);

	/**----------------------------------------------------------------------------------------
	 *
	 * void
	 * AMD_CB_EventNotify(u8 evtClass, u16 event, const u8 *pEventData0)
	 *
	 * Description:
	 *	Errors, events, faults, warnings, and useful information are provided by
	 *	calling this routine as often as necessary, once for each notification.
	 *	See elsewhere in this file for class, event, and event data definitions.
	 *	See the documentation for more details.
	 *
	 * Parameters:
	 *	@param[in]  u8  evtClass = What level event is this
	 *	@param[in]  u16 event = A unique ID of this event
	 *	@param[in]  u8* pEventData0 = useful data associated with the event.
	 *
	 * ---------------------------------------------------------------------------------------
	 */
	void (*AMD_CB_EventNotify) (
		u8 evtClass,
		u16 event,
		const u8 *pEventData0
	);

	const struct ht_link_config *ht_link_configuration;

} AMD_HTBLOCK;

/*
 * Event Notification Structures
 * These structures are passed to AMD_CB_EventNotify as *pEventData0.
 */

/* For event HT_EVENT_HW_SYNCHFLOOD */
typedef struct
{
	u8 eSize;
	u8 node;
	u8 link;
} sHtEventHWSynchFlood;

/* For event HT_EVENT_HW_HTCRC */
typedef struct
{
	u8 eSize;
	u8 node;
	u8 link;
	u8 laneMask;
} sHtEventHWHtCrc;

/* For event HT_EVENT_NCOH_BUS_MAX_EXCEED */
typedef struct
{
	u8 eSize;
	u8 node;
	u8 link;
	u8 bus;
} sHTEventNcohBusMaxExceed;

/* For event HT_EVENT_NCOH_LINK_EXCEED */
typedef struct
{
	u8 eSize;
	u8 node;
	u8 link;
	u8 depth;
	u8 maxLinks;
} sHtEventNcohLinkExceed;

/* For event HT_EVENT_NCOH_CFG_MAP_EXCEED */
typedef struct
{
	u8 eSize;
	u8 node;
	u8 link;
} sHtEventNcohCfgMapExceed;

/* For event HT_EVENT_NCOH_BUID_EXCEED */
typedef struct
{
	u8 eSize;
	u8 node;
	u8 link;
	u8 depth;
	u8 currentBUID;
	u8 unitCount;
} sHtEventNcohBuidExceed;

/* For event HT_EVENT_NCOH_DEVICE_FAILED */
typedef struct
{
	u8 eSize;
	u8 node;
	u8 link;
	u8 depth;
	u8 attemptedBUID;
} sHtEventNcohDeviceFailed;

/* For event HT_EVENT_NCOH_AUTO_DEPTH */
typedef struct
{
	u8 eSize;
	u8 node;
	u8 link;
	u8 depth;
} sHtEventNcohAutoDepth;

/* For event HT_EVENT_OPT_REQUIRED_CAP_RETRY,
 *	      HT_EVENT_OPT_REQUIRED_CAP_GEN3
 */
typedef struct
{
	u8 eSize;
	u8 node;
	u8 link;
	u8 depth;
} sHtEventOptRequiredCap;

/* For event HT_EVENT_COH_NO_TOPOLOGY */
typedef struct
{
	u8 eSize;
	u8 totalNodes;
} sHtEventCohNoTopology;

/* For event HT_EVENT_COH_LINK_EXCEED */
typedef struct
{
	u8 eSize;
	u8 node;
	u8 link;
	u8 targetNode;
	u8 totalNodes;
	u8 maxLinks;
} sHtEventCohLinkExceed;

/* For event HT_EVENT_COH_FAMILY_FEUD */
typedef struct
{
	u8 eSize;
	u8 node;
	u8 link;
	u8 totalNodes;
} sHtEventCohFamilyFeud;

/* For event HT_EVENT_COH_NODE_DISCOVERED */
typedef struct
{
	u8 eSize;
	u8 node;
	u8 link;
	u8 newNode;
} sHtEventCohNodeDiscovered;

/* For event HT_EVENT_COH_MPCAP_MISMATCH */
typedef struct
{
	u8 eSize;
	u8 node;
	u8 link;
	u8 sysMpCap;
	u8 totalNodes;
} sHtEventCohMpCapMismatch;

/*----------------------------------------------------------------------------
 *			FUNCTIONS PROTOTYPE
 *
 *----------------------------------------------------------------------------
 */
void amdHtInitialize(AMD_HTBLOCK *pBlock);


#endif	 /* H3FINIT_H */