1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
* Copyright (C) 2014 Sage Electronic Engineering, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <arch/io.h>
#include <device/pci_ops.h>
#include <northbridge/amd/agesa/state_machine.h>
#include <southbridge/amd/agesa/hudson/hudson.h>
#include <amdblocks/acpimmio.h>
#include <superio/nuvoton/common/nuvoton.h>
#include <superio/nuvoton/nct5104d/nct5104d.h>
#define SERIAL_DEV PNP_DEV(0x4E, NCT5104D_SP4)
void board_BeforeAgesa(struct sysinfo *cb)
{
u32 reg32;
/* For serial port option, plug-in card on LPC. */
pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
pci_write_config32(dev, 0x44, 0xff03ffd5);
/* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
* LpcClk[1:0]". To be consistent with Parmer, setting to 4mA
* even though the register is not documented in the Kabini BKDG.
* Otherwise the serial output is bad code.
*/
outb(0xD2, 0xcd6);
outb(0x00, 0xcd7);
/* Enable the AcpiMmio space */
outb(0x24, 0xcd6);
outb(0x01, 0xcd7);
/* Set auxiliary output clock frequency on OSCOUT1 pin to be 25MHz */
/* Set auxiliary output clock frequency on OSCOUT2 pin to be 48MHz */
reg32 = misc_read32(0x28);
reg32 &= 0xffc0ffff; // Clr bits [21:19] & [18:16]
reg32 |= 0x00010000; // Set bit 16 for 25MHz
misc_write32(0x28, reg32);
/* Enable Auxiliary OSCOUT1/OSCOUT2 */
reg32 = misc_read32(0x40;
reg32 &= 0xffffff7b; // clear 2, 7
misc_write32(0x40, reg32);
nct5104d_enable_uartd(SERIAL_DEV);
nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
}
#if 0
/* Was before copy_and_run. */
outb(0xEA, 0xCD6);
outb(0x1, 0xcd7);
#endif
|