1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
|
chip northbridge/intel/sandybridge
# IGD Displays
register "gfx" = "GMA_STATIC_DISPLAYS(0)"
# Enable DisplayPort Hotplug with 6ms pulse
register "gpu_dp_d_hotplug" = "0x06"
# Enable Panel as LVDS and configure power delays
register "gpu_panel_port_select" = "PANEL_PORT_LVDS"
register "gpu_panel_power_cycle_delay" = "5" # T4: 400ms
register "gpu_panel_power_up_delay" = "400" # T1+T2: 40ms
register "gpu_panel_power_down_delay" = "150" # T3: 15ms
register "gpu_panel_power_backlight_on_delay" = "2100" # T5: 210ms
register "gpu_panel_power_backlight_off_delay" = "2100" # TD: 210ms
# For native gfx
register "gpu_cpu_backlight" = "0x1155"
register "gpu_pch_backlight" = "0x06100610"
register "spd_addresses" = "{0x50, 0, 0x52, 0}"
register "ec_present" = "1"
# FIXME: Native raminit requires reduced max clock
register "max_mem_clock_mhz" = "CONFIG(USE_NATIVE_RAMINIT) ? 666 : 800"
register "usb_port_config" = "{
{ 1, 0, 0x0040 },
{ 1, 0, 0x0040 },
{ 0, 1, 0x0000 },
{ 1, 1, 0x0040 },
{ 1, 1, 0x0040 },
{ 1, 1, 0x0040 },
{ 0, 1, 0x0000 },
{ 0, 1, 0x0000 },
{ 0, 5, 0x0000 },
{ 1, 4, 0x0040 },
{ 0, 5, 0x0000 },
{ 0, 5, 0x0000 },
{ 0, 5, 0x0000 },
{ 1, 5, 0x0040 },}"
register "usb3.mode" = "2" # Auto
register "usb3.hs_port_switch_mask" = "3" # Ports 0 & 1
register "usb3.preboot_support" = "0" # No PreOS boot support
register "usb3.xhci_streams" = "1" # Sure, lets have streams
chip cpu/intel/model_206ax
device cpu_cluster 0 on end
register "tcc_offset" = "5" # TCC of 95C
end
device domain 0 on
subsystemid 0x1ae0 0xc000 inherit
device ref host_bridge on end # host bridge
device ref igd on end # vga controller
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
# GPI routing
# 0 No effect (default)
# 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
# 2 SCI (if corresponding GPIO_EN bit is also set)
register "alt_gp_smi_en" = "0x0002"
register "gpi1_routing" = "1"
register "gpi6_routing" = "2"
register "sata_port_map" = "0x3"
# Set max SATA speed to 3.0 Gb/s
register "sata_interface_speed_support" = "0x2"
# Enable EC Port 0x68/0x6C
register "gen1_dec" = "0x00040069"
# EC range is 0x800-0x9ff
register "gen2_dec" = "0x00fc0901"
# EC range is 0x1610-0x161F
register "gen3_dec" = "0x0001C1611"
# Enable zero-based linear PCIe root port functions
register "pcie_port_coalesce" = "true"
register "usb_port_config" = "{
{1, 0, 0}, /* P0: USB 3.0 1 (OC0) */
{1, 0, 0}, /* P1: USB 3.0 2 (OC0) */
{0, 0, 0}, /* P2: Empty */
{1, 0, -1}, /* P3: Camera (no OC) */
{1, 0, -1}, /* P4: WLAN (no OC) */
{1, 0, -1}, /* P5: WWAN (no OC) */
{0, 0, 0}, /* P6: Empty */
{0, 0, 0}, /* P7: Empty */
{0, 0, 0}, /* P8: Empty */
{1, 0, 4}, /* P9: USB 2.0 (AUO4) (OC4) */
{0, 0, 0}, /* P10: Empty */
{0, 0, 0}, /* P11: Empty */
{0, 0, 0}, /* P12: Empty */
{1, 0, -1}, /* P13: Bluetooth (no OC) */
}"
device ref xhci on end # USB 3.0 Controller
device ref mei1 on end # Management Engine Interface 1
device ref mei2 off end # Management Engine Interface 2
device ref me_ide_r off end # Management Engine IDE-R
device ref me_kt off end # Management Engine KT
device ref gbe off end # Intel Gigabit Ethernet
device ref ehci2 on end # USB2 EHCI #2 (AUO4, BlueTooth)
device ref hda on end # High Definition Audio
device ref pcie_rp1 on end # PCIe Port #1
device ref pcie_rp2 on end # PCIe Port #2 (WLAN)
device ref pcie_rp3 on end # PCIe Port #3 (Card Reader)
register "pcie_aspm[2]" = "0x3"
device ref pcie_rp4 off end # PCIe Port #4
device ref pcie_rp5 off end # PCIe Port #5
device ref pcie_rp6 on end # PCIe Port #6 (LAN)
device ref pcie_rp7 off end # PCIe Port #7
device ref pcie_rp8 off end # PCIe Port #8
device ref ehci1 on end # USB2 EHCI #1 (Camera, WLAN, WWAN)
device ref pci_bridge off end # PCI bridge
device ref lpc on
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
chip ec/quanta/it8518
# 60h/64h KBC
device pnp ff.1 on # dummy address
end
end
end # LPC bridge
device ref sata1 on end # SATA Controller 1 (HDD/SSD)
device ref smbus on end # SMBus Controller
device ref sata2 off end # SATA Controller 2 (MSATA)
device ref thermal off end # Thermal
end
end
end
|
