1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
|
/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
* Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
*
* Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
*/
#include <arch/pirq_routing.h>
static const struct irq_routing_table intel_irq_routing_table = {
PIRQ_SIGNATURE, /* u32 signature */
PIRQ_VERSION, /* u16 version */
32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
0x00, /* Where the interrupt router lies (bus) */
(0x00<<3)|0x0, /* Where the interrupt router lies (dev) */
0, /* IRQs devoted exclusively to PCI usage */
0x8086, /* Vendor */
0x122e, /* Device */
0, /* Miniport data */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
0x50, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
{
/* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
{0x00,(0x12<<3)|0x0, {{0x30, 0x8000}, {0x00, 0x0}, {0x00, 0x0}, {0x00, 0x00}}, 0x0, 0x0},
{0x00,(0x14<<3)|0x0, {{0x30, 0x8000}, {0x31, 0x0}, {0x32, 0x0}, {0x33, 0x00}}, 0x0, 0x0},
}
};
unsigned long write_pirq_routing_table(unsigned long addr)
{
return copy_pirq_routing_table(addr, &intel_irq_routing_table);
}
|
