path: root/src/Kconfig

##
## This file is part of the coreboot repair project.
##
## Redistribution and use in source and binary forms, with or without
## modification, are permitted provided that the following conditions
## are met:
## 1. Redistributions of source code must retain the above copyright
##    notice, this list of conditions and the following disclaimer.
## 2. Redistributions in binary form must reproduce the above copyright
##    notice, this list of conditions and the following disclaimer in the
##    documentation and/or other materials provided with the distribution.
## 3. The name of the author may not be used to endorse or promote products
##    derived from this software without specific prior written permission.
##
## THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
## ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
## ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
## FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
## DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
## OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
## LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
## OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
## SUCH DAMAGE.
##

mainmenu "Coreboot Configuration"

menu "General setup"

config LOCALVERSION
	string "Local version string"
	help
	  Append an extra string to the end of the coreboot version.

	  This can be useful if, for instance, you want to append the
	  respective board's hostname or some other identifying string to
	  the coreboot version number, so that you can easily distinguish
	  boot logs of different boards from each other.

endmenu

source src/mainboard/Kconfig
source src/arch/i386/Kconfig
source src/arch/ppc/Kconfig
source src/northbridge/Kconfig
source src/devices/Kconfig
source src/southbridge/Kconfig
source src/superio/Kconfig
source src/cpu/Kconfig

config PCI_BUS_SEGN_BITS
	int
	default 0

config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
	hex
	default 0x0

config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
	hex
	default 0x0

config CPU_ADDR_BITS
	int
	default 36

config AGP_APERTURE_SIZE
	hex
	default 0x0

config XIP_ROM_BASE
	hex
	default 0xfffe0000

config XIP_ROM_SIZE
	hex
	default 0x20000

config LB_CKS_RANGE_START
	int
	default 49

config LB_CKS_RANGE_END
	int
	default 125

config LB_CKS_LOC
	int
	default 126

config LOGICAL_CPUS
	bool
	default y

config PCI_ROM_RUN
	bool
	default n

config HEAP_SIZE
	hex
	default 0x2000

config COREBOOT_V2
	bool
	default y

config COREBOOT_V4
	bool
	default y

config DEBUG
	bool
	default n

config USE_PRINTK_IN_CAR
	bool
	default n

config USE_OPTION_TABLE
	bool
	default n

config MAX_CPUS
	int
	default 1

config MMCONF_SUPPORT_DEFAULT
	bool
	default n

config MMCONF_SUPPORT
	bool
	default n

config LB_MEM_TOPK
	hex
	default 0x800

config COMPRESSED_PAYLOAD_LZMA
	bool
	default y

config COMPRESSED_PAYLOAD_NRV2B
	bool
	default n

config ATI_RAGE_XL
	bool
	default n

source src/console/Kconfig

config HAVE_ACPI_RESUME
	bool
	default n

config ACPI_SSDTX_NUM
	int
	default 0

config HAVE_FALLBACK_BOOT
	bool
	default y

config USE_FALLBACK_IMAGE
	bool
	default y

config HAVE_FAILOVER_BOOT
	bool
	default n

config USE_FAILOVER_IMAGE
	bool
	default n

config HAVE_HARD_RESET
	bool
	default n

config HAVE_INIT_TIMER
	bool
	default n

config HAVE_MAINBOARD_RESOURCES
	bool
	default n

config HAVE_MOVNTI
	bool
	default y

config HAVE_OPTION_TABLE
	bool
	default y

config PIRQ_ROUTE
	bool
	default n

config HAVE_SMI_HANDLER
	bool
	default n

config PCI_IO_CFG_EXT
	bool
	default n

config IOAPIC
	bool
	default n

config VIDEO_MB
	int
	default 0

config USE_WATCHDOG_ON_BOOT
	bool
	default n

config VGA
	bool
	default n
	help
	  Build board-specific VGA code.

config GFXUMA
	bool
	default n
	help
	  Enable Unified Memory Architecture for graphics.

# TODO
# menu "Drivers"
#
# endmenu

config HAVE_ACPI_TABLES
	bool

config HAVE_MP_TABLE
	bool

config HAVE_PIRQ_TABLE
	bool

config HAVE_HIGH_TABLES
	bool

menu "System tables"

config HAVE_LOW_TABLES
	bool
	default y

config WRITE_HIGH_TABLES
	bool "Write 'high' tables to avoid being overwritten in F segment"
	depends on HAVE_HIGH_TABLES
	default y

config MULTIBOOT
	bool "Generate Multiboot tables (for GRUB2)"
	default n

config GENERATE_ACPI_TABLES
	depends on HAVE_ACPI_TABLES
	bool "Generate ACPI tables"
	default y

config GENERATE_MP_TABLE
	depends on HAVE_MP_TABLE
	bool "Generate an MP table"
	default y

config GENERATE_PIRQ_TABLE
	depends on HAVE_PIRQ_TABLE
	bool "Generate a PIRQ table"
	default y

endmenu

menu "Payload"

choice
	prompt "Add a payload"
	default PAYLOAD_NONE

config PAYLOAD_NONE
	bool "None"
	help
	  Select this option if you want to create an "empty" coreboot
	  ROM image for a certain mainboard, i.e. a coreboot ROM image
	  which does not yet contain a payload.

	  For such an image to be useful, you have to use 'cbfstool'
	  to add a payload to the ROM image later.

config PAYLOAD_ELF
	bool "An ELF executable payload"
	help
	  Select this option if you have a payload image (an ELF file)
	  which coreboot should run as soon as the basic hardware
	  initialization is completed.

	  You will be able to specify the location and file name of the
	  payload image later.

endchoice

config FALLBACK_PAYLOAD_FILE
	string "Payload path and filename"
	depends on PAYLOAD_ELF
	default "payload.elf"
	help
	  The path and filename of the ELF executable file to use as payload.

# TODO: Defined if no payload? Breaks build?
config COMPRESSED_PAYLOAD_LZMA
	bool "Use LZMA compression for payloads"
	default y
	depends on PAYLOAD_ELF
	help
	  In order to reduce the size payloads take up in the ROM chip
	  coreboot can compress them using the LZMA algorithm.

endmenu

menu "VGA BIOS"

config VGA_BIOS
	bool "Add a VGA BIOS image"
	help
	  Select this option if you have a VGA BIOS image that you would
	  like to add to your ROM.

	  You will be able to specify the location and file name of the
	  image later.

config FALLBACK_VGA_BIOS_FILE
	string "VGA BIOS path and filename"
	depends on VGA_BIOS
	default "vgabios.bin"
	help
	  The path and filename of the file to use as VGA BIOS.

config FALLBACK_VGA_BIOS_ID
	string "VGA BIOS ID"
	depends on VGA_BIOS
	default "1106,3230"
	help
	  The comma-separated PCI vendor and device ID that would associate
	  your VGA BIOS to your video card.

	  Example: 1106,3230

	  In the above example 1106 is the PCI vendor ID (in hex, but without
	  the "0x" prefix) and 3230 specifies the PCI device ID of the
	  video card (also in hex, without "0x" prefix).

endmenu

menu "Debugging"

# TODO: Better help text and detailed instructions.
config GDB_STUB
	bool "GDB debugging support"
	default y
	help
	  If enabled, you will be able to set breakpoints for gdb debugging.
	  See src/arch/i386/lib/c_start.S for details.

endmenu