path: root/src/Kconfig

##
## This file is part of the coreboot project.
##
## Copyright (C) 2009-2010 coresystems GmbH
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

mainmenu "Coreboot Configuration"

menu "General setup"

config EXPERT
	bool "Expert mode"
	help
	  This allows you to select certain advanced configuration options.

	  Warning: Only enable this option if you really know what you are
	  doing! You have been warned!

config LOCALVERSION
	string "Local version string"
	help
	  Append an extra string to the end of the coreboot version.

	  This can be useful if, for instance, you want to append the
	  respective board's hostname or some other identifying string to
	  the coreboot version number, so that you can easily distinguish
	  boot logs of different boards from each other.

config CBFS_PREFIX
	string "CBFS prefix to use"
	default "fallback"
	help
	  Select the prefix to all files put into the image. It's "fallback"
	  by default, "normal" is a common alternative.

endmenu

source src/mainboard/Kconfig
source src/arch/i386/Kconfig

menu "Chipset"

comment "CPU"
source src/cpu/Kconfig
comment "Northbridge"
source src/northbridge/Kconfig
comment "Southbridge"
source src/southbridge/Kconfig
comment "Super I/O"
source src/superio/Kconfig
comment "Devices"
source src/devices/Kconfig

endmenu

config PCI_BUS_SEGN_BITS
	int
	default 0

config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
	hex
	default 0x0

config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
	hex
	default 0x0

config CPU_ADDR_BITS
	int
	default 36

config XIP_ROM_BASE
	hex
	default 0xfffe0000

config XIP_ROM_SIZE
	hex
	default 0x20000

config LB_CKS_RANGE_START
	int
	default 49

config LB_CKS_RANGE_END
	int
	default 125

config LB_CKS_LOC
	int
	default 126

config LOGICAL_CPUS
	bool
	default y

config PCI_ROM_RUN
	bool
	default n

config HEAP_SIZE
	hex
	default 0x4000

config DEBUG
	bool
	default n

config USE_PRINTK_IN_CAR
	bool
	default n

config USE_OPTION_TABLE
	bool
	default n

config MAX_CPUS
	int
	default 1

config MMCONF_SUPPORT_DEFAULT
	bool
	default n

config MMCONF_SUPPORT
	bool
	default n

config RAMTOP
	hex
	default 0x200000

config ATI_RAGE_XL
	bool

source src/console/Kconfig

config HAVE_ACPI_RESUME
	bool
	default n

config ACPI_SSDTX_NUM
	int
	default 0

config HAVE_FALLBACK_BOOT
	bool
	default y

config USE_FALLBACK_IMAGE
	bool
	default y

config HAVE_FAILOVER_BOOT
	bool
	default n

config USE_FAILOVER_IMAGE
	bool
	default n

config HAVE_HARD_RESET
	bool
	default n

config HAVE_INIT_TIMER
	bool
	default n if UDELAY_IO
	default y

config HAVE_MAINBOARD_RESOURCES
	bool
	default n

config HAVE_OPTION_TABLE
	bool
	default y
	help
	  This variable specifies whether a given board has a cmos.layout
	  file containing NVRAM/CMOS bit definitions.
	  It defaults to 'y' but can be changed to 'n' in mainboard/*/Kconfig.

config PIRQ_ROUTE
	bool
	default n

config HAVE_SMI_HANDLER
	bool
	default n

config PCI_IO_CFG_EXT
	bool
	default n

config IOAPIC
	bool
	default n

# TODO: Can probably be removed once all chipsets have kconfig options for it.
config VIDEO_MB
	int
	default 0

config USE_WATCHDOG_ON_BOOT
	bool
	default n

config VGA
	bool
	default n
	help
	  Build board-specific VGA code.

config GFXUMA
	bool
	default n
	help
	  Enable Unified Memory Architecture for graphics.

# TODO
# menu "Drivers"
#
# endmenu

#TODO Remove this option or make it useful.
config HAVE_LOW_TABLES
	bool
	default y
	help
	  This Option is unused in the code.  Since two boards try to set it to
	  'n', they may be broken.  We either need to make the option useful or
	  get rid of it.  The broken boards are:
	  asus/m2v-mx_se
	  supermicro/h8dme

config HAVE_HIGH_TABLES
	bool
	default y
	help
	  This variable specifies whether a given northbridge has high table
	  support.
	  It is set in northbridge/*/Kconfig.
	  Whether or not the high tables are actually written by coreboot is
	  configurable by the user via WRITE_HIGH_TABLES.

config HAVE_ACPI_TABLES
	bool
	help
	  This variable specifies whether a given board has ACPI table support.
	  It is usually set in mainboard/*/Kconfig.
	  Whether or not the ACPI tables are actually generated by coreboot
	  is configurable by the user via GENERATE_ACPI_TABLES.

config HAVE_MP_TABLE
	bool
	help
	  This variable specifies whether a given board has MP table support.
	  It is usually set in mainboard/*/Kconfig.
	  Whether or not the MP table is actually generated by coreboot
	  is configurable by the user via GENERATE_MP_TABLE.

config HAVE_PIRQ_TABLE
	bool
	help
	  This variable specifies whether a given board has PIRQ table support.
	  It is usually set in mainboard/*/Kconfig.
	  Whether or not the PIRQ table is actually generated by coreboot
	  is configurable by the user via GENERATE_PIRQ_TABLE.

#These Options are here to avoid "undefined" warnings.
#The actual selection and help texts are in the following menu.

config GENERATE_ACPI_TABLES
	bool
	default HAVE_ACPI_TABLES

config GENERATE_MP_TABLE
	bool
	default HAVE_MP_TABLE

config GENERATE_PIRQ_TABLE
	bool
	default HAVE_PIRQ_TABLE

config WRITE_HIGH_TABLES
	bool
	default HAVE_HIGH_TABLES

menu "System tables"

config WRITE_HIGH_TABLES
	bool "Write 'high' tables to avoid being overwritten in F segment"
	depends on HAVE_HIGH_TABLES
	default y

config MULTIBOOT
	bool "Generate Multiboot tables (for GRUB2)"
	default y

config GENERATE_ACPI_TABLES
	depends on HAVE_ACPI_TABLES
	bool "Generate ACPI tables"
	default y
	help
	  Generate ACPI tables for this board.

	  If unsure, say Y.

config GENERATE_MP_TABLE
	depends on HAVE_MP_TABLE
	bool "Generate an MP table"
	default y
	help
	  Generate an MP table (conforming to the Intel MultiProcessor
	  specification 1.4) for this board.

	  If unsure, say Y.

config GENERATE_PIRQ_TABLE
	depends on HAVE_PIRQ_TABLE
	bool "Generate a PIRQ table"
	default y
	help
	  Generate a PIRQ table for this board.

	  If unsure, say Y.

endmenu

menu "Payload"

choice
	prompt "Add a payload"
	default PAYLOAD_NONE

config PAYLOAD_NONE
	bool "None"
	help
	  Select this option if you want to create an "empty" coreboot
	  ROM image for a certain mainboard, i.e. a coreboot ROM image
	  which does not yet contain a payload.

	  For such an image to be useful, you have to use 'cbfstool'
	  to add a payload to the ROM image later.

config PAYLOAD_ELF
	bool "An ELF executable payload"
	help
	  Select this option if you have a payload image (an ELF file)
	  which coreboot should run as soon as the basic hardware
	  initialization is completed.

	  You will be able to specify the location and file name of the
	  payload image later.

endchoice

config FALLBACK_PAYLOAD_FILE
	string "Payload path and filename"
	depends on PAYLOAD_ELF
	default "payload.elf"
	help
	  The path and filename of the ELF executable file to use as payload.

# TODO: Defined if no payload? Breaks build?
config COMPRESSED_PAYLOAD_LZMA
	bool "Use LZMA compression for payloads"
	default y
	depends on PAYLOAD_ELF
	help
	  In order to reduce the size payloads take up in the ROM chip
	  coreboot can compress them using the LZMA algorithm.

config COMPRESSED_PAYLOAD_NRV2B
	bool
	default n

endmenu

menu "VGA BIOS"

config VGA_BIOS
	bool "Add a VGA BIOS image"
	help
	  Select this option if you have a VGA BIOS image that you would
	  like to add to your ROM.

	  You will be able to specify the location and file name of the
	  image later.

config FALLBACK_VGA_BIOS_FILE
	string "VGA BIOS path and filename"
	depends on VGA_BIOS
	default "vgabios.bin"
	help
	  The path and filename of the file to use as VGA BIOS.

config FALLBACK_VGA_BIOS_ID
	string "VGA device PCI IDs"
	depends on VGA_BIOS
	default "1106,3230"
	help
	  The comma-separated PCI vendor and device ID that would associate
	  your VGA BIOS to your video card.

	  Example: 1106,3230

	  In the above example 1106 is the PCI vendor ID (in hex, but without
	  the "0x" prefix) and 3230 specifies the PCI device ID of the
	  video card (also in hex, without "0x" prefix).

endmenu

menu "Debugging"

# TODO: Better help text and detailed instructions.
config GDB_STUB
	bool "GDB debugging support"
	default y
	help
	  If enabled, you will be able to set breakpoints for gdb debugging.
	  See src/arch/i386/lib/c_start.S for details.

endmenu

config LIFT_BSP_APIC_ID
	bool
	default n

# These probably belong somewhere else, but they are needed somewhere.
config AP_CODE_IN_CAR
	bool
	default n

config USE_INIT
	bool
	default n

config ENABLE_APIC_EXT_ID
	bool
	default n

config WARNINGS_ARE_ERRORS
	bool
	default n

config ID_SECTION_OFFSET
	hex
	default 0x10