package main

import "fmt"

type bd82x6x struct {
	variant string
	node    *DevTreeNode
}

func (b bd82x6x) IsPCIeHotplug(ctx Context, port int) bool {
	portDev, ok := PCIMap[PCIAddr{Bus: 0, Dev: 0x1c, Func: port}]
	if !ok {
		return false
	}
	return (portDev.ConfigDump[0xdb] & (1 << 6)) != 0
}

func ich9GetFlashSize(ctx Context) {
	inteltool := ctx.InfoSource.GetInteltool()
	switch (inteltool.RCBA[0x3410] >> 10) & 3 {
	/* SPI. All boards I've seen with sandy/ivy use SPI.  */
	case 3:
		ROMProtocol = "SPI"
		highflkb := uint32(0)
		for reg := uint16(0); reg < 5; reg++ {
			fl := (inteltool.RCBA[0x3854+4*reg] >> 16) & 0x1fff
			flkb := (fl + 1) << 2
			if flkb > highflkb {
				highflkb = flkb
			}
		}
		ROMSizeKB = int(highflkb)
		/* Shared with ME. Flashrom is unable to handle it.  */
		FlashROMSupport = "n"
	}
}

func (b bd82x6x) GetGPIOHeader() string {
	return "southbridge/intel/bd82x6x/pch.h"
}

func (b bd82x6x) EnableGPE(in int) {
	b.node.Registers[fmt.Sprintf("gpi%d_routing", in)] = "2"
}

func (b bd82x6x) EncodeGPE(in int) int {
	return in + 0x10
}

func (b bd82x6x) DecodeGPE(in int) int {
	return in - 0x10
}

func (b bd82x6x) NeedRouteGPIOManually() {
	b.node.Comment += ", FIXME: set gpiX_routing for EC support"
}

func (b bd82x6x) Scan(ctx Context, addr PCIDevData) {

	SouthBridge = &b

	inteltool := ctx.InfoSource.GetInteltool()
	GPIO(ctx, inteltool)

	KconfigBool["SOUTHBRIDGE_INTEL_"+b.variant] = true
	KconfigBool["SERIRQ_CONTINUOUS_MODE"] = true
	KconfigInt["USBDEBUG_HCD_INDEX"] = 2
	KconfigComment["USBDEBUG_HCD_INDEX"] = "FIXME: check this"
	dmi := ctx.InfoSource.GetDMI()
	if dmi.Vendor == "LENOVO" {
		KconfigInt["DRAM_RESET_GATE_GPIO"] = 10
	} else {
		KconfigInt["DRAM_RESET_GATE_GPIO"] = 60
	}
	KconfigComment["DRAM_RESET_GATE_GPIO"] = "FIXME: check this"

	ich9GetFlashSize(ctx)

	DSDTDefines = append(DSDTDefines,
		DSDTDefine{
			Key:   "BRIGHTNESS_UP",
			Value: "\\_SB.PCI0.GFX0.INCB",
		},
		DSDTDefine{
			Key:   "BRIGHTNESS_DOWN",
			Value: "\\_SB.PCI0.GFX0.DECB",
		})

	FADT := ctx.InfoSource.GetACPI()["FACP"]

	pcieHotplugMap := "{ "

	for port := 0; port < 7; port++ {
		if b.IsPCIeHotplug(ctx, port) {
			pcieHotplugMap += "1, "
		} else {
			pcieHotplugMap += "0, "
		}
	}

	if b.IsPCIeHotplug(ctx, 7) {
		pcieHotplugMap += "1 }"
	} else {
		pcieHotplugMap += "0 }"
	}

	cur := DevTreeNode{
		Chip:    "southbridge/intel/bd82x6x",
		Comment: "Intel Series 6 Cougar Point PCH",

		Registers: map[string]string{
			"sata_interface_speed_support": "0x3",
			"gen1_dec":                     FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x84:0x88]),
			"gen2_dec":                     FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x88:0x8c]),
			"gen3_dec":                     FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x8c:0x90]),
			"gen4_dec":                     FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x90:0x94]),
			"pcie_port_coalesce":           "1",
			"pcie_hotplug_map":             pcieHotplugMap,

			"sata_port_map": fmt.Sprintf("0x%x", PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 2}].ConfigDump[0x92]&0x3f),

			"docking_supported": (FormatBool((FADT[113] & (1 << 1)) != 0)),
			"spi_uvscc":         fmt.Sprintf("0x%x", inteltool.RCBA[0x38c8]),
			"spi_lvscc":         fmt.Sprintf("0x%x", inteltool.RCBA[0x38c4]&^(1<<23)),
		},
		PCISlots: []PCISlot{
			PCISlot{PCIAddr: PCIAddr{Dev: 0x14, Func: 0}, writeEmpty: false, alias: "xhci", additionalComment: "USB 3.0 Controller"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 0}, writeEmpty: true, alias: "mei1", additionalComment: "Management Engine Interface 1"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 1}, writeEmpty: true, alias: "mei2", additionalComment: "Management Engine Interface 2"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 2}, writeEmpty: true, alias: "me_ide_r", additionalComment: "Management Engine IDE-R"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 3}, writeEmpty: true, alias: "me_kt", additionalComment: "Management Engine KT"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x19, Func: 0}, writeEmpty: true, alias: "gbe", additionalComment: "Intel Gigabit Ethernet"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1a, Func: 0}, writeEmpty: true, alias: "ehci2", additionalComment: "USB2 EHCI #2"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1b, Func: 0}, writeEmpty: true, alias: "hda", additionalComment: "High Definition Audio"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 0}, writeEmpty: true, alias: "pcie_rp1", additionalComment: "PCIe Port #1"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 1}, writeEmpty: true, alias: "pcie_rp2", additionalComment: "PCIe Port #2"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 2}, writeEmpty: true, alias: "pcie_rp3", additionalComment: "PCIe Port #3"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 3}, writeEmpty: true, alias: "pcie_rp4", additionalComment: "PCIe Port #4"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 4}, writeEmpty: true, alias: "pcie_rp5", additionalComment: "PCIe Port #5"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 5}, writeEmpty: true, alias: "pcie_rp6", additionalComment: "PCIe Port #6"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 6}, writeEmpty: true, alias: "pcie_rp7", additionalComment: "PCIe Port #7"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 7}, writeEmpty: true, alias: "pcie_rp8", additionalComment: "PCIe Port #8"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1d, Func: 0}, writeEmpty: true, alias: "ehci1", additionalComment: "USB2 EHCI #1"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1e, Func: 0}, writeEmpty: true, alias: "pci_bridge", additionalComment: "PCI bridge"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 0}, writeEmpty: true, alias: "lpc", additionalComment: "LPC bridge"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 2}, writeEmpty: true, alias: "sata1", additionalComment: "SATA Controller 1"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 3}, writeEmpty: true, alias: "smbus", additionalComment: "SMBus"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 5}, writeEmpty: true, alias: "sata2", additionalComment: "SATA Controller 2"},
			PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 6}, writeEmpty: true, alias: "thermal", additionalComment: "Thermal"},
		},
	}

	b.node = &cur

	xhciDev, ok := PCIMap[PCIAddr{Bus: 0, Dev: 0x14, Func: 0}]

	if ok {
		cur.Registers["xhci_switchable_ports"] = FormatHexLE32(xhciDev.ConfigDump[0xd4:0xd8])
		cur.Registers["superspeed_capable_ports"] = FormatHexLE32(xhciDev.ConfigDump[0xdc:0xe0])
		cur.Registers["xhci_overcurrent_mapping"] = FormatHexLE32(xhciDev.ConfigDump[0xc0:0xc4])
	}

	PutPCIChip(addr, cur)
	PutPCIDevParent(addr, "", "lpc")

	DSDTIncludes = append(DSDTIncludes, DSDTInclude{
		File: "southbridge/intel/common/acpi/platform.asl",
	})
	DSDTIncludes = append(DSDTIncludes, DSDTInclude{
		File: "southbridge/intel/bd82x6x/acpi/globalnvs.asl",
	})
	DSDTIncludes = append(DSDTIncludes, DSDTInclude{
		File: "southbridge/intel/common/acpi/sleepstates.asl",
	})
	DSDTPCI0Includes = append(DSDTPCI0Includes, DSDTInclude{
		File: "southbridge/intel/bd82x6x/acpi/pch.asl",
	})

	AddBootBlockFile("early_init.c", "")
	AddROMStageFile("early_init.c", "")

	sb := Create(ctx, "early_init.c")
	defer sb.Close()
	Add_gpl(sb)

	sb.WriteString(`#include <bootblock_common.h>
#include <device/pci_ops.h>
#include <southbridge/intel/bd82x6x/pch.h>
`)
	usbPortConfig := "{\n"

	currentMap := map[uint32]int{
		0x20000153: 0,
		0x20000f57: 1,
		0x2000055b: 2,
		0x20000f51: 3,
		0x2000094a: 4,
		0x2000035f: 5,
		0x20000f53: 6,
		0x20000f5b: 7,
		0x20000553: 9,
	}

	for port := uint(0); port < 14; port++ {
		var pinmask uint32
		OCPin := -1
		if port < 8 {
			pinmask = inteltool.RCBA[0x35a0]
		} else {
			pinmask = inteltool.RCBA[0x35a4]
		}
		for pin := uint(0); pin < 4; pin++ {
			if ((pinmask >> ((port % 8) + 8*pin)) & 1) != 0 {
				OCPin = int(pin)
				if port >= 8 {
					OCPin += 4
				}
			}
		}
		current, ok := currentMap[inteltool.RCBA[uint16(0x3500+4*port)]]
		if !ok {
			usbPortConfig += fmt.Sprintf("\t\t\t\t{%d, 0x%x, %d},\n",
				((inteltool.RCBA[0x359c]>>port)&1)^1,
				inteltool.RCBA[uint16(0x3500+4*port)] & 0xfff,
				OCPin)
		} else {
			usbPortConfig += fmt.Sprintf("\t\t\t\t{%d, %d, %d},\n",
				((inteltool.RCBA[0x359c]>>port)&1)^1,
				current,
				OCPin)
		}
	}
	usbPortConfig += "\t\t\t}"
	cur.Registers["usb_port_config"] = usbPortConfig

	sb.WriteString(`
void bootblock_mainboard_early_init(void)
{
`)
	RestorePCI16Simple(sb, addr, 0x82)

	RestorePCI16Simple(sb, addr, 0x80)

	sb.WriteString("}\n")

	gnvs := Create(ctx, "acpi_tables.c")
	defer gnvs.Close()

	Add_gpl(gnvs)
	gnvs.WriteString(`#include <acpi/acpi_gnvs.h>
#include <soc/nvs.h>

/* FIXME: check this function.  */
void mainboard_fill_gnvs(struct global_nvs *gnvs)
{
	/* The lid is open by default. */
	gnvs->lids = 1;

	/* Temperature at which OS will shutdown */
	gnvs->tcrt = 100;
	/* Temperature at which OS will throttle CPU */
	gnvs->tpsv = 90;
}
`)
}

func init() {
	/* BD82X6X LPC */
	for id := 0x1c40; id <= 0x1c5f; id++ {
		RegisterPCI(0x8086, uint16(id), bd82x6x{variant: "BD82X6X"})
	}

	/* C216 LPC */
	for id := 0x1e41; id <= 0x1e5f; id++ {
		RegisterPCI(0x8086, uint16(id), bd82x6x{variant: "C216"})
	}

	/* PCIe bridge */
	for _, id := range []uint16{
		0x1c10, 0x1c12, 0x1c14, 0x1c16,
		0x1c18, 0x1c1a, 0x1c1c, 0x1c1e,
		0x1e10, 0x1e12, 0x1e14, 0x1e16,
		0x1e18, 0x1e1a, 0x1e1c, 0x1e1e,
		0x1e25, 0x244e, 0x2448,
	} {
		RegisterPCI(0x8086, id, GenericPCI{})
	}

	/* SMBus controller  */
	RegisterPCI(0x8086, 0x1c22, GenericPCI{MissingParent: "smbus"})
	RegisterPCI(0x8086, 0x1e22, GenericPCI{MissingParent: "smbus"})

	/* SATA */
	for _, id := range []uint16{
		0x1c00, 0x1c01, 0x1c02, 0x1c03,
		0x1e00, 0x1e01, 0x1e02, 0x1e03,
	} {
		RegisterPCI(0x8086, id, GenericPCI{})
	}

	/* EHCI */
	for _, id := range []uint16{
		0x1c26, 0x1c2d, 0x1e26, 0x1e2d,
	} {
		RegisterPCI(0x8086, id, GenericPCI{})
	}

	/* XHCI */
	RegisterPCI(0x8086, 0x1e31, GenericPCI{})

	/* ME and children */
	for _, id := range []uint16{
		0x1c3a, 0x1c3b, 0x1c3c, 0x1c3d,
		0x1e3a, 0x1e3b, 0x1e3c, 0x1e3d,
	} {
		RegisterPCI(0x8086, id, GenericPCI{})
	}

	/* Ethernet */
	RegisterPCI(0x8086, 0x1502, GenericPCI{})
	RegisterPCI(0x8086, 0x1503, GenericPCI{})

}