# Sample config file for Motorola Sandpoint X3 Demo Board with # the Altimus mpc7410 PMC card # This will make a target directory of ./sandpoint loadoptions target sandpoint uses CROSS_COMPILE uses HAVE_OPTION_TABLE uses CONFIG_SANDPOINT_ALTIMUS uses CONFIG_COMPRESS uses DEFAULT_CONSOLE_LOGLEVEL uses CONFIG_USE_INIT uses CONFIG_CHIP_CONFIGURE uses NO_POST uses CONFIG_CONSOLE_SERIAL8250 uses TTYS0_BASE uses CONFIG_IDE uses CONFIG_FS_STREAM uses CONFIG_FS_EXT2 uses CONFIG_FS_ISO9660 uses CONFIG_FS_FAT uses AUTOBOOT_CMDLINE uses PAYLOAD_SIZE uses ROM_SIZE uses ROM_IMAGE_SIZE uses _RESET uses _EXCEPTION_VECTORS uses _ROMBASE uses _ROMSTART uses _RAMBASE uses _RAMSTART uses STACK_SIZE uses HEAP_SIZE ## use a cross compiler #option CROSS_COMPILE="powerpc-eabi-" #option CROSS_COMPILE="ppc_74xx-" ## Use stage 1 initialization code option CONFIG_USE_INIT=1 ## Use static configuration option CONFIG_CHIP_CONFIGURE=1 ## We don't use compressed image option CONFIG_COMPRESS=0 ## Turn off POST codes option NO_POST=1 ## Enable serial console option DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_CONSOLE_SERIAL8250=1 option TTYS0_BASE=0x3f8 ## Load payload using filo option CONFIG_IDE=1 option CONFIG_FS_STREAM=1 option CONFIG_FS_EXT2=1 option CONFIG_FS_ISO9660=1 option CONFIG_FS_FAT=1 option AUTOBOOT_CMDLINE="hdc1:/vmlinuz" # LinuxBIOS must fit into 128KB option ROM_IMAGE_SIZE=131072 option ROM_SIZE={ROM_IMAGE_SIZE+PAYLOAD_SIZE} option PAYLOAD_SIZE=262144 # Set stack and heap sizes (stage 2) option STACK_SIZE=0x10000 option HEAP_SIZE=0x10000 # Sandpoint Demo Board romimage "normal" ## Base of ROM option _ROMBASE=0xfff00000 ## Sandpoint reset vector option _RESET=_ROMBASE+0x100 ## Exception vectors (other than reset vector) option _EXCEPTION_VECTORS=_RESET+0x100 ## Start of linuxBIOS in the boot rom ## = _RESET + exeception vector table size option _ROMSTART=_RESET+0x3100 ## LinuxBIOS C code runs at this location in RAM option _RAMBASE=0x00100000 option _RAMSTART=0x00100000 option CONFIG_SANDPOINT_ALTIMUS=1 mainboard motorola/sandpoint end buildrom ./linuxbios.rom ROM_SIZE "normal"