#ifndef __CB_BDK_FUSE_H__
#define __CB_BDK_FUSE_H__

/***********************license start***********************************
* Copyright (c) 2003-2017  Cavium Inc. (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
*   * Redistributions of source code must retain the above copyright
*     notice, this list of conditions and the following disclaimer.
*
*   * Redistributions in binary form must reproduce the above
*     copyright notice, this list of conditions and the following
*     disclaimer in the documentation and/or other materials provided
*     with the distribution.
*
*   * Neither the name of Cavium Inc. nor the names of
*     its contributors may be used to endorse or promote products
*     derived from this software without specific prior written
*     permission.
*
* This Software, including technical data, may be subject to U.S. export
* control laws, including the U.S. Export Administration Act and its
* associated regulations, and may be subject to export or import
* regulations in other countries.
*
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT
* TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY
* REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT
* DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES
* OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR
* PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT,
* QUIET POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK
* ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
***********************license end**************************************/

/**
 * @file
 *
 * Functions for reading Cavium chip fuses.
 *
 * <hr>$Revision: 49448 $<hr>
 */


/**
 * Read a single fuse bit
 *
 * @param fuse   Fuse number (0-1024)
 *
 * @return fuse value: 0 or 1
 */
extern int bdk_fuse_read(bdk_node_t node, int fuse);

/**
 * Read a range of fuses
 *
 * @param node   Node to read from
 * @param fuse   Fuse number
 * @param width  Number of fuses to read, max of 64
 *
 * @return Fuse value
 */
extern uint64_t bdk_fuse_read_range(bdk_node_t node, int fuse, int width);

/**
 * Soft blow a fuse. Soft blown fuses keep there new value over soft resets, but
 * not power cycles.
 *
 * @param node   Node to blow
 * @param fuse   Fuse to blow
 *
 * @return Zero on success, negative on failure
 */
extern int bdk_fuse_soft_blow(bdk_node_t node, int fuse);

/**
 * Read a single fuse bit from the field set (FUSF)
 *
 * @param fuse   Fuse number (0-1024)
 *
 * @return fuse value: 0 or 1
 */
extern int bdk_fuse_field_read(bdk_node_t node, int fuse);

/**
 * Soft blow a fuse in the field set (FUSF). Soft blown fuses
 * keep there new value over soft resets, but not power cycles.
 *
 * @param node   Node to blow
 * @param fuse   Fuse to blow
 *
 * @return Zero on success, negative on failure
 */
extern int bdk_fuse_field_soft_blow(bdk_node_t node, int fuse);

/**
 * Hard blow fuses in the field set (FUSF). Up to 128 fuses in a bank
 * are blown at the same time
 *
 * @param node       Node to blow
 * @param start_fuse First fuses to blow. Must be on a 128 bit boundary.
 *                   This fuse is blown to match the LSB of fuse 0.
 * @param fuses0     First 64 fuse values. Bits with a 1 are blown. LSB
 *                   of fuses0 maps to start_fuse. MSB of fuses0 maps to
 *                   (start_fuse + 63).
 * @param fuses1     Second 64 fuse values. Bits with a 1 are blown. LSB
 *                   of fuses1 maps to (start_fuse + 64). MSB of fuses1
 *                   maps to (start_fuse + 127).
 *
 * @return Zero on success, negative on failure
 */
extern int bdk_fuse_field_hard_blow(bdk_node_t node, int start_fuse, uint64_t fuses0, uint64_t fuses1);

#endif