/* $NoKeywords:$ */ /** * @file * * AMD AGESA Input Structure Creation * * Contains AGESA input structure creation support. * * @xrefitem bom "File Content Label" "Release Content" * @e project: AGESA * @e sub-project: Common * @e \$Revision: 63425 $ @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $ * */ /* ****************************************************************************** * * Copyright 2008 - 2012 ADVANCED MICRO DEVICES, INC. All Rights Reserved. * * AMD is granting you permission to use this software (the Materials) * pursuant to the terms and conditions of your Software License Agreement * with AMD. This header does *NOT* give you permission to use the Materials * or any rights under AMD's intellectual property. Your use of any portion * of these Materials shall constitute your acceptance of those terms and * conditions. If you do not agree to the terms and conditions of the Software * License Agreement, please do not use any portion of these Materials. * * CONFIDENTIALITY: The Materials and all other information, identified as * confidential and provided to you by AMD shall be kept confidential in * accordance with the terms and conditions of the Software License Agreement. * * LIMITATION OF LIABILITY: THE MATERIALS AND ANY OTHER RELATED INFORMATION * PROVIDED TO YOU BY AMD ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED * WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO WARRANTIES OF * MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY PARTICULAR PURPOSE, * OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR USAGE OF TRADE. * IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER * (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS * INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF AMD'S NEGLIGENCE, * GROSS NEGLIGENCE, THE USE OF OR INABILITY TO USE THE MATERIALS OR ANY OTHER * RELATED INFORMATION PROVIDED TO YOU BY AMD, EVEN IF AMD HAS BEEN ADVISED OF * THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE * EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, * THE ABOVE LIMITATION MAY NOT APPLY TO YOU. * * AMD does not assume any responsibility for any errors which may appear in * the Materials or any other related information provided to you by AMD, or * result from use of the Materials or any related information. * * You agree that you will not reverse engineer or decompile the Materials. * * NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any * further information, software, technical information, know-how, or show-how * available to you. Additionally, AMD retains the right to modify the * Materials at any time, without notice, and is not obligated to provide such * modified Materials to you. * * U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with * "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is * subject to the restrictions as set forth in FAR 52.227-14 and * DFAR252.227-7013, et seq., or its successor. Use of the Materials by the * Government constitutes acknowledgement of AMD's proprietary rights in them. * * EXPORT ASSURANCE: You agree and certify that neither the Materials, nor any * direct product thereof will be exported directly or indirectly, into any * country prohibited by the United States Export Administration Act and the * regulations thereunder, without the required authorization from the U.S. * government nor will be used for any purpose prohibited by the same. ****************************************************************************** */ /*---------------------------------------------------------------------------------------- * M O D U L E S U S E D *---------------------------------------------------------------------------------------- */ #include "AGESA.h" #include "amdlib.h" #include "Ids.h" #include "GeneralServices.h" #include "heapManager.h" #include "CreateStruct.h" #include "cpuFamilyTranslation.h" #include "Filecode.h" CODE_GROUP (G1_PEICC) RDATA_GROUP (G1_PEICC) #define FILECODE PROC_COMMON_CREATESTRUCT_FILECODE /*---------------------------------------------------------------------------------------- * D E F I N I T I O N S A N D M A C R O S *---------------------------------------------------------------------------------------- */ extern CONST FUNCTION_PARAMS_INFO FuncParamsInfo[]; extern CONST UINTN InitializerCount; /*---------------------------------------------------------------------------------------- * T Y P E D E F S A N D S T R U C T U R E S *---------------------------------------------------------------------------------------- */ /*---------------------------------------------------------------------------------------- * P R O T O T Y P E S O F L O C A L F U N C T I O N S *---------------------------------------------------------------------------------------- */ /*---------------------------------------------------------------------------------------- * E X P O R T E D F U N C T I O N S *---------------------------------------------------------------------------------------- */ extern BUILD_OPT_CFG UserOptions; /*---------------------------------------------------------------------------------------*/ /** * Allocate and initialize Config headers and Service Interface structures. * * This function will be called for each AGESA public APIs. * This function will do the following: * -# Locate the AGESA API structure parameters initializer function information. * -# Find the size of the structure that gets passed to each public APIs as * the entry parameter. Allocate heap space using the size for PreMemHeap, callout for * memory allocation for PostMemDram, and just set the config and service interface * pointers for ByHost. * -# If the allocation is not ByHost, copy the AmdConfigParams into the newly created AmdConfigParams. * For ByHost, we're using the caller's existing config params. * -# Call the initializer function, and pass a reference to the Config params and to * the Service Interface struct. On return the constructor will have filled the * remaining structure with default values. * -# Fill the remaining info in the newly created structure on heap in AMD_CONFIG_PARAMS * area (i.e. Fill *newStructPtr with the pointer to the newly created structure) * -# Set the appropriate AGESA function number in the StdHeader member of the input * parameter structure. * * @param[in,out] InterfaceParams Pointer to structure containing the function call * whose parameter structure is to be created, the * allocation method, and a pointer to the newly * created structure. * * @retval AGESA_SUCCESS The interface struct is allocated and initialized. * @retval AGESA_UNSUPPORTED The Service is not supported. * */ AGESA_STATUS AmdCreateStruct ( IN OUT AMD_INTERFACE_PARAMS *InterfaceParams ) { UINTN ServiceIndex; ALLOCATE_HEAP_PARAMS AllocHeapParams; AMD_CONFIG_PARAMS *NewlyCreatedConfig; VOID *NewlyCreatedServiceInterface; AGESA_STATUS AgesaStatus; AGESA_STATUS TempStatus; AGESA_STATUS IgnoredSts; CPU_SPECIFIC_SERVICES *FamilySpecificServices; AgesaStatus = AGESA_SUCCESS; ASSERT (InterfaceParams != NULL); switch (InterfaceParams->AgesaFunctionName) { case AMD_INIT_RESET: if (!IsBsp (&InterfaceParams->StdHeader, &IgnoredSts)) { // APs must transfer their system core number from the mailbox to // a local register while it is still valid. GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &InterfaceParams->StdHeader); FamilySpecificServices->TransferApCoreNumber (FamilySpecificServices, &InterfaceParams->StdHeader); } InterfaceParams->StdHeader.HeapStatus = HEAP_DO_NOT_EXIST_YET; break; case AMD_INIT_EARLY: case AMD_INIT_RECOVERY: case AMD_INIT_RESUME: case AMD_INIT_POST: InterfaceParams->StdHeader.HeapStatus = HEAP_LOCAL_CACHE; break; case AMD_INIT_ENV: InterfaceParams->StdHeader.HeapStatus = HEAP_TEMP_MEM; break; case AMD_INIT_LATE: case AMD_INIT_MID: case AMD_S3_SAVE: case AMD_LATE_RUN_AP_TASK: InterfaceParams->StdHeader.HeapStatus = HEAP_SYSTEM_MEM; break; case AMD_S3LATE_RESTORE: InterfaceParams->StdHeader.HeapStatus = HEAP_S3_RESUME; break; default: ASSERT (FALSE); InterfaceParams->StdHeader.HeapStatus = HEAP_LOCAL_CACHE; break; } InterfaceParams->StdHeader.HeapBasePtr = HeapGetBaseAddress (&InterfaceParams->StdHeader); if (InterfaceParams->AgesaFunctionName == AMD_INIT_RESET) { AgesaStatus = HeapManagerInit (&InterfaceParams->StdHeader); } // Step 1 for (ServiceIndex = 0; ServiceIndex < InitializerCount; ServiceIndex++) { if (FuncParamsInfo[ServiceIndex].AgesaFunctionName == InterfaceParams->AgesaFunctionName) { break; } } if (ServiceIndex >= InitializerCount) { // A call was made to AGESA with an invalid function number. This wrapper error may be due to the build target // not containing the desired entry point. return AGESA_UNSUPPORTED; } // Step 2 LibAmdMemFill (&AllocHeapParams, 0, (UINTN) (sizeof (ALLOCATE_HEAP_PARAMS)), &InterfaceParams->StdHeader); if (InterfaceParams->AllocationMethod < ByHost) { // Allocate one buffer to contain the config params and the service struct. // The service struct begins immediately after the config params. AllocHeapParams.RequestedBufferSize = FuncParamsInfo[ServiceIndex].CreateStructSize + sizeof (AMD_CONFIG_PARAMS); AllocHeapParams.BufferHandle = FuncParamsInfo[ServiceIndex].BufferHandle; AllocHeapParams.Persist = HEAP_SYSTEM_MEM; TempStatus = HeapAllocateBuffer (&AllocHeapParams, &(InterfaceParams->StdHeader)); AgesaStatus = ((AgesaStatus > TempStatus) ? AgesaStatus : TempStatus); NewlyCreatedConfig = (AMD_CONFIG_PARAMS *)AllocHeapParams.BufferPtr; NewlyCreatedConfig++; NewlyCreatedServiceInterface = NewlyCreatedConfig; NewlyCreatedConfig = (AMD_CONFIG_PARAMS *)AllocHeapParams.BufferPtr; } else { // The caller (example, agesa basic interface implementation) already has a buffer to use. NewlyCreatedConfig = (AMD_CONFIG_PARAMS *)InterfaceParams; NewlyCreatedServiceInterface = InterfaceParams->NewStructPtr; ASSERT (InterfaceParams->NewStructSize >= FuncParamsInfo[ServiceIndex].CreateStructSize); } ASSERT (NewlyCreatedConfig != NULL); ASSERT (NewlyCreatedServiceInterface != NULL); // Step 3 if (InterfaceParams->AllocationMethod != ByHost) { *NewlyCreatedConfig = InterfaceParams->StdHeader; } // Step 4 TempStatus = FuncParamsInfo[ServiceIndex].AgesaFunction (NewlyCreatedConfig, NewlyCreatedServiceInterface); AgesaStatus = ((AgesaStatus > TempStatus) ? AgesaStatus : TempStatus); // Step 5 if (InterfaceParams->AllocationMethod != ByHost) { InterfaceParams->NewStructPtr = (VOID *) NewlyCreatedServiceInterface; InterfaceParams->NewStructSize = FuncParamsInfo[ServiceIndex].CreateStructSize; } // Step 6 ((AMD_CONFIG_PARAMS *) InterfaceParams->NewStructPtr)->Func = InterfaceParams->AgesaFunctionName; return AgesaStatus; } /*---------------------------------------------------------------------------------------*/ /** * Clears storage space from allocation for a parameter block of an * AGESA software call entry. * * @param[in,out] InterfaceParams Pointer to structure containing the function call * whose parameter structure is to be deallocated. * * @retval AGESA_STATUS * *--------------------------------------------------------------------------------------- **/ AGESA_STATUS AmdReleaseStruct ( IN OUT AMD_INTERFACE_PARAMS *InterfaceParams ) { UINT8 i; UINT8 *BufferPtr; VOID *ServicePtr; AGESA_STATUS AgesaStatus; AGESA_STATUS TempStatus; LOCATE_HEAP_PTR LocHeap; AgesaStatus = AGESA_SUCCESS; switch (InterfaceParams->AgesaFunctionName) { case AMD_INIT_RESET: case AMD_INIT_EARLY: case AMD_INIT_RECOVERY: case AMD_INIT_RESUME: InterfaceParams->StdHeader.HeapStatus = HEAP_LOCAL_CACHE; break; case AMD_INIT_POST: InterfaceParams->StdHeader.HeapStatus = HEAP_TEMP_MEM; break; case AMD_INIT_ENV: case AMD_INIT_LATE: case AMD_INIT_MID: case AMD_S3_SAVE: case AMD_LATE_RUN_AP_TASK: InterfaceParams->StdHeader.HeapStatus = HEAP_SYSTEM_MEM; break; case AMD_S3LATE_RESTORE: InterfaceParams->StdHeader.HeapStatus = HEAP_S3_RESUME; break; default: ASSERT (FALSE); InterfaceParams->StdHeader.HeapStatus = HEAP_LOCAL_CACHE; break; } InterfaceParams->StdHeader.HeapBasePtr = HeapGetBaseAddress (&InterfaceParams->StdHeader); // Step 1 for (i = 0; i < InitializerCount; i++) { if (FuncParamsInfo[i].AgesaFunctionName == InterfaceParams->AgesaFunctionName) { break; } } if (i >= InitializerCount) { return AGESA_BOUNDS_CHK; } // Step 2 if (InterfaceParams->AllocationMethod < ByHost) { LocHeap.BufferHandle = FuncParamsInfo[i].BufferHandle; if (HeapLocateBuffer (&LocHeap, &(InterfaceParams->StdHeader)) == AGESA_SUCCESS) { BufferPtr = (UINT8 *) LocHeap.BufferPtr; ServicePtr = &BufferPtr[sizeof (AMD_CONFIG_PARAMS)]; TempStatus = FuncParamsInfo[i].AgesaDestructor (&(InterfaceParams->StdHeader), ServicePtr); AgesaStatus = ((AgesaStatus > TempStatus) ? AgesaStatus : TempStatus); } } // Step 3 if (InterfaceParams->AllocationMethod < ByHost) { TempStatus = HeapDeallocateBuffer (FuncParamsInfo[i].BufferHandle, &(InterfaceParams->StdHeader)); AgesaStatus = ((AgesaStatus > TempStatus) ? AgesaStatus : TempStatus); } else { // Unless we define service specific destructors, nothing to do for ByHost. return AGESA_SUCCESS; } return AgesaStatus; }