/* $NoKeywords:$ */
/**
 * @file
 *
 * Config Fch Spi controller
 *
 * Init Spi Controller features (PEI phase).
 *
 * @xrefitem bom "File Content Label" "Release Content"
 * @e project:     AGESA
 * @e sub-project: FCH
 * @e \$Revision: 44324 $   @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $
 *
 */
/*
*****************************************************************************
*
* Copyright (c) 2011, Advanced Micro Devices, Inc.
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Advanced Micro Devices, Inc. nor the names of 
 *       its contributors may be used to endorse or promote products derived 
 *       from this software without specific prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
****************************************************************************
*/
#include "FchPlatform.h"
#define FILECODE PROC_FCH_SPI_SPIRESET_FILECODE

/**
 * FchInitResetSpi - Config Spi controller during Power-On
 *
 *
 *
 * @param[in] FchDataPtr Fch configuration structure pointer.
 *
 */
VOID
FchInitResetSpi (
  IN  VOID     *FchDataPtr
  )
{
  UINT32                    SpiModeByte;
  UINT32                    SpiRomBase;
  FCH_RESET_DATA_BLOCK      *LocalCfgPtr;
  AMD_CONFIG_PARAMS         *StdHeader;

  LocalCfgPtr = (FCH_RESET_DATA_BLOCK *) FchDataPtr;
  StdHeader = LocalCfgPtr->StdHeader;
  SpiRomBase = UserOptions.CfgSpiRomBaseAddress;

  //
  // Set Spi ROM Base Address
  //
  RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGA0, AccessWidth32, 0x001F, SpiRomBase, StdHeader);

  //
  //  Spi Mode Initial
  //
  RwMem (SpiRomBase + FCH_SPI_MMIO_REG00, AccessWidth32, 0xFFFFFFFF, (BIT19 + BIT24 + BIT25 + BIT26));
  RwMem (SpiRomBase + FCH_SPI_MMIO_REG0C, AccessWidth32, 0xFFC0FFFF, 0 );

  if (LocalCfgPtr->SpiSpeed) {
    RwMem (SpiRomBase + FCH_SPI_MMIO_REG0C, AccessWidth32, ~(BIT13 + BIT12), ((LocalCfgPtr->SpiSpeed - 1 ) << 12));
  }

  if (LocalCfgPtr->FastSpeed) {
    RwMem (SpiRomBase + FCH_SPI_MMIO_REG0C, AccessWidth32, ~(BIT15 + BIT14), ((LocalCfgPtr->FastSpeed - 1 ) << 14));
  }

  RwMem (SpiRomBase + FCH_SPI_MMIO_REG1C, AccessWidth32, ~(BIT10), ((LocalCfgPtr->BurstWrite) << 10));

  SpiModeByte = LocalCfgPtr->Mode;
  if (LocalCfgPtr->Mode) {
    if ((SpiModeByte == FCH_SPI_MODE_QUAL_114) || (SpiModeByte == FCH_SPI_MODE_QUAL_112) || (SpiModeByte == FCH_SPI_MODE_QUAL_144) || (SpiModeByte == FCH_SPI_MODE_QUAL_122)) {
    }
    RwMem (SpiRomBase + FCH_SPI_MMIO_REG00, AccessWidth32, ~( BIT18 + BIT29 + BIT30), ((LocalCfgPtr->Mode & 1) << 18) + ((LocalCfgPtr->Mode & 6) << 28));
  }
}

/**
 * FchInitRecoverySpi - Config Spi controller during Crisis
 * Recovery
 *
 *
 *
 * @param[in] FchDataPtr Fch configuration structure pointer.
 *
 */
VOID
FchInitRecoverySpi (
  IN  VOID     *FchDataPtr
  )
{
}