/* $NoKeywords:$ */ /** * @file * * AMD Library * * Contains interface to the AMD AGESA library * * @xrefitem bom "File Content Label" "Release Content" * @e project: AGESA * @e sub-project: Lib * @e \$Revision: 44325 $ @e \$Date: 2010-12-22 03:29:53 -0700 (Wed, 22 Dec 2010) $ * */ /* ***************************************************************************** * * Copyright (c) 2011, Advanced Micro Devices, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * Neither the name of Advanced Micro Devices, Inc. nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * *************************************************************************** * */ /*---------------------------------------------------------------------------------------- * M O D U L E S U S E D *---------------------------------------------------------------------------------------- */ #include "AGESA.h" #include "Ids.h" #include "cpuRegisters.h" #include "amdlib.h" #include "Filecode.h" CODE_GROUP (G1_PEICC) RDATA_GROUP (G1_PEICC) #define FILECODE LIB_AMDLIB_FILECODE /*---------------------------------------------------------------------------------------- * D E F I N I T I O N S A N D M A C R O S *---------------------------------------------------------------------------------------- */ /*---------------------------------------------------------------------------------------- * T Y P E D E F S A N D S T R U C T U R E S *---------------------------------------------------------------------------------------- */ /*---------------------------------------------------------------------------------------- * P R O T O T Y P E S O F L O C A L F U N C T I O N S *---------------------------------------------------------------------------------------- */ BOOLEAN STATIC GetPciMmioAddress ( OUT UINT64 *MmioAddress, OUT UINT32 *MmioSize, IN AMD_CONFIG_PARAMS *StdHeader ); VOID STATIC LibAmdGetDataFromPtr ( IN ACCESS_WIDTH AccessWidth, IN CONST VOID *Data, IN CONST VOID *DataMask, OUT UINT32 *TemData, OUT UINT32 *TempDataMask ); /*---------------------------------------------------------------------------------------- * E X P O R T E D F U N C T I O N S *---------------------------------------------------------------------------------------- */ UINT8 ReadIo8 ( IN UINT16 Address ) { return __inbyte (Address); } UINT16 ReadIo16 ( IN UINT16 Address ) { return __inword (Address); } UINT32 ReadIo32 ( IN UINT16 Address ) { return __indword (Address); } VOID WriteIo8 ( IN UINT16 Address, IN UINT8 Data ) { __outbyte (Address, Data); } VOID WriteIo16 ( IN UINT16 Address, IN UINT16 Data ) { __outword (Address, Data); } VOID WriteIo32 ( IN UINT16 Address, IN UINT32 Data ) { __outdword (Address, Data); } STATIC UINT64 SetFsBase ( UINT64 address ) { UINT64 hwcr; hwcr = __readmsr (0xC0010015); __writemsr (0xC0010015, hwcr | 1 << 17); __writemsr (0xC0000100, address); return hwcr; } STATIC VOID RestoreHwcr ( UINT64 value ) { __writemsr (0xC0010015, value); } UINT8 Read64Mem8 ( IN UINT64 Address ) { UINT8 dataRead; UINT64 hwcrSave; if ((Address >> 32) == 0) { return *(volatile UINT8 *) (UINTN) Address; } hwcrSave = SetFsBase (Address); dataRead = __readfsbyte (0); RestoreHwcr (hwcrSave); return dataRead; } UINT16 Read64Mem16 ( IN UINT64 Address ) { UINT16 dataRead; UINT64 hwcrSave; if ((Address >> 32) == 0) { return *(volatile UINT16 *) (UINTN) Address; } hwcrSave = SetFsBase (Address); dataRead = __readfsword (0); RestoreHwcr (hwcrSave); return dataRead; } UINT32 Read64Mem32 ( IN UINT64 Address ) { UINT32 dataRead; UINT64 hwcrSave; if ((Address >> 32) == 0) { return *(volatile UINT32 *) (UINTN) Address; } hwcrSave = SetFsBase (Address); dataRead = __readfsdword (0); RestoreHwcr (hwcrSave); return dataRead; } VOID Write64Mem8 ( IN UINT64 Address, IN UINT8 Data ) { if ((Address >> 32) == 0){ *(volatile UINT8 *) (UINTN) Address = Data; } else { UINT64 hwcrSave; hwcrSave = SetFsBase (Address); __writefsbyte (0, Data); RestoreHwcr (hwcrSave); } } VOID Write64Mem16 ( IN UINT64 Address, IN UINT16 Data ) { if ((Address >> 32) == 0){ *(volatile UINT16 *) (UINTN) Address = Data; } else { UINT64 hwcrSave; hwcrSave = SetFsBase (Address); __writefsword (0, Data); RestoreHwcr (hwcrSave); } } VOID Write64Mem32 ( IN UINT64 Address, IN UINT32 Data ) { if ((Address >> 32) == 0){ *(volatile UINT32 *) (UINTN) Address = Data; } else { UINT64 hwcrSave; hwcrSave = SetFsBase (Address); __writefsdword (0, Data); RestoreHwcr (hwcrSave); } } VOID LibAmdReadCpuReg ( IN UINT8 RegNum, OUT UINT32 *Value ) { *Value = 0; switch (RegNum){ case CR4_REG: *Value = __readcr4 (); break; case DR0_REG: *Value = __readdr (0); break; case DR1_REG: *Value = __readdr (1); break; case DR2_REG: *Value = __readdr (2); break; case DR3_REG: *Value = __readdr (3); break; case DR7_REG: *Value = __readdr (7); break; default: *Value = -1; break; } } VOID LibAmdWriteCpuReg ( IN UINT8 RegNum, IN UINT32 Value ) { switch (RegNum){ case CR4_REG: __writecr4 (Value); break; case DR0_REG: __writedr (0, Value); break; case DR1_REG: __writedr (1, Value); break; case DR2_REG: __writedr (2, Value); break; case DR3_REG: __writedr (3, Value); break; case DR7_REG: __writedr (7, Value); break; default: break; } } VOID LibAmdWriteBackInvalidateCache ( IN VOID ) { __wbinvd (); } VOID LibAmdHDTBreakPoint ( VOID ) { __writemsr (0xC001100A, __readmsr (0xC001100A) | 1); __debugbreak (); // do you really need icebp? If so, go back to asm code } UINT8 LibAmdBitScanForward ( IN UINT32 value ) { UINTN Index; for (Index = 0; Index < 32; Index++){ if (value & (1 << Index)) break; } return (UINT8) Index; } UINT8 LibAmdBitScanReverse ( IN UINT32 value ) { uint8_t bit = 31; do { if (value & (1 << 31)) return bit; value <<= 1; bit--; } while (value != 0); return 0xFF; /* Error code indicating no bit found */ } VOID LibAmdMsrRead ( IN UINT32 MsrAddress, OUT UINT64 *Value, IN OUT AMD_CONFIG_PARAMS *ConfigPtr ) { *Value = __readmsr (MsrAddress); } VOID LibAmdMsrWrite ( IN UINT32 MsrAddress, CONST IN UINT64 *Value, IN OUT AMD_CONFIG_PARAMS *ConfigPtr ) { __writemsr (MsrAddress, *Value); } void LibAmdCpuidRead ( IN UINT32 CpuidFcnAddress, OUT CPUID_DATA* Value, IN OUT AMD_CONFIG_PARAMS *ConfigPtr ) { __cpuid ((int *)Value, CpuidFcnAddress); } UINT64 ReadTSC ( VOID ) { return __rdtsc (); } VOID LibAmdSimNowEnterDebugger ( VOID ) { STATIC CONST UINT8 opcode [] = {0x60, // pushad 0xBB, 0x02, 0x00, 0x00, 0x00, // mov ebx, 2 0xB8, 0x0B, 0xD0, 0xCC, 0xBA, // mov eax, 0xBACCD00B 0x0F, 0xA2, // cpuid 0x61, // popad 0xC3 // ret }; ((VOID (*)(VOID)) (size_t) opcode) (); // call the function } #ifdef __SSE3__ VOID F10RevDProbeFilterCritical ( IN PCI_ADDR PciAddress, IN UINT32 PciRegister ) { UINT64 msrsave; msrsave = __readmsr (0xC001001F); __writemsr (0xC001001F, msrsave | 1ULL << 46); // EnableCf8ExtCfg _mm_mfence (); __outdword (0xCF8, PciAddress.AddressValue); _mm_mfence (); __outdword (0xCFC, PciRegister | 2); _mm_mfence (); __writemsr (0xC001001F, msrsave); } VOID LibAmdCLFlush ( IN UINT64 Address, IN UINT8 Count ) { UINT64 hwcrSave; UINT8 *address32; UINTN Index; address32 = 0; hwcrSave = SetFsBase (Address); for (Index = 0; Index < Count; Index++){ _mm_mfence (); _mm_clflush_fs (&address32 [Index * 64]); } RestoreHwcr (hwcrSave); } #endif //__SSE3__ VOID StopHere ( VOID ) { VOLATILE UINTN x = 1; while (x); } VOID LibAmdFinit() { /* TODO: finit */ __asm__ volatile ("finit"); } /*---------------------------------------------------------------------------------------*/ /** * Read IO port * * * @param[in] AccessWidth Access width * @param[in] IoAddress IO port address * @param[in] Value Pointer to save data * @param[in] StdHeader Standard configuration header * */ VOID LibAmdIoRead ( IN ACCESS_WIDTH AccessWidth, IN UINT16 IoAddress, OUT VOID *Value, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { switch (AccessWidth) { case AccessWidth8: case AccessS3SaveWidth8: *(UINT8 *) Value = ReadIo8 (IoAddress); break; case AccessWidth16: case AccessS3SaveWidth16: *(UINT16 *) Value = ReadIo16 (IoAddress); break; case AccessWidth32: case AccessS3SaveWidth32: *(UINT32 *) Value = ReadIo32 (IoAddress); break; default: ASSERT (FALSE); break; } } /*---------------------------------------------------------------------------------------*/ /** * Write IO port * * * @param[in] AccessWidth Access width * @param[in] IoAddress IO port address * @param[in] Value Pointer to data * @param[in] StdHeader Standard configuration header * */ VOID LibAmdIoWrite ( IN ACCESS_WIDTH AccessWidth, IN UINT16 IoAddress, IN CONST VOID *Value, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { switch (AccessWidth) { case AccessWidth8: case AccessS3SaveWidth8: WriteIo8 (IoAddress, *(UINT8 *) Value); break; case AccessWidth16: case AccessS3SaveWidth16: WriteIo16 (IoAddress, *(UINT16 *) Value); break; case AccessWidth32: case AccessS3SaveWidth32: WriteIo32 (IoAddress, *(UINT32 *) Value); break; default: ASSERT (FALSE); break; } } /*---------------------------------------------------------------------------------------*/ /** * IO read modify write * * * @param[in] AccessWidth Access width * @param[in] IoAddress IO address * @param[in] Data OR data * @param[in] DataMask Mask to be used before data write back to register. * @param[in] StdHeader Standard configuration header * */ VOID LibAmdIoRMW ( IN ACCESS_WIDTH AccessWidth, IN UINT16 IoAddress, IN CONST VOID *Data, IN CONST VOID *DataMask, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { UINT32 TempData = 0; UINT32 TempMask = 0; UINT32 Value = 0; LibAmdGetDataFromPtr (AccessWidth, Data, DataMask, &TempData, &TempMask); LibAmdIoRead (AccessWidth, IoAddress, &Value, StdHeader); Value = (Value & (~TempMask)) | TempData; LibAmdIoWrite (AccessWidth, IoAddress, &Value, StdHeader); } /*---------------------------------------------------------------------------------------*/ /** * Poll IO register * * Poll register until (RegisterValue & DataMask) == Data * * @param[in] AccessWidth Access width * @param[in] IoAddress IO address * @param[in] Data Data to compare * @param[in] DataMask And mask * @param[in] Delay Poll for time in 100ns (not supported) * @param[in] StdHeader Standard configuration header * */ VOID LibAmdIoPoll ( IN ACCESS_WIDTH AccessWidth, IN UINT16 IoAddress, IN CONST VOID *Data, IN CONST VOID *DataMask, IN UINT64 Delay, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { UINT32 TempData = 0; UINT32 TempMask = 0; UINT32 Value; LibAmdGetDataFromPtr (AccessWidth, Data, DataMask, &TempData, &TempMask); do { LibAmdIoRead (AccessWidth, IoAddress, &Value, StdHeader); } while (TempData != (Value & TempMask)); } /*---------------------------------------------------------------------------------------*/ /** * Read memory/MMIO * * * @param[in] AccessWidth Access width * @param[in] MemAddress Memory address * @param[in] Value Pointer to data * @param[in] StdHeader Standard configuration header * */ VOID LibAmdMemRead ( IN ACCESS_WIDTH AccessWidth, IN UINT64 MemAddress, OUT VOID *Value, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { switch (AccessWidth) { case AccessWidth8: case AccessS3SaveWidth8: *(UINT8 *) Value = Read64Mem8 (MemAddress); break; case AccessWidth16: case AccessS3SaveWidth16: *(UINT16 *) Value = Read64Mem16 (MemAddress); break; case AccessWidth32: case AccessS3SaveWidth32: *(UINT32 *) Value = Read64Mem32 (MemAddress); break; default: ASSERT (FALSE); break; } } /*---------------------------------------------------------------------------------------*/ /** * Write memory/MMIO * * * @param[in] AccessWidth Access width * @param[in] MemAddress Memory address * @param[in] Value Pointer to data * @param[in] StdHeader Standard configuration header * */ VOID LibAmdMemWrite ( IN ACCESS_WIDTH AccessWidth, IN UINT64 MemAddress, IN CONST VOID *Value, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { switch (AccessWidth) { case AccessWidth8: case AccessS3SaveWidth8: Write64Mem8 (MemAddress, *((UINT8 *) Value)); break; case AccessWidth16: case AccessS3SaveWidth16: Write64Mem16 (MemAddress, *((UINT16 *) Value)); break; case AccessWidth32: case AccessS3SaveWidth32: Write64Mem32 (MemAddress, *((UINT32 *) Value)); break; default: ASSERT (FALSE); break; } } /*---------------------------------------------------------------------------------------*/ /** * Memory/MMIO read modify write * * * @param[in] AccessWidth Access width * @param[in] MemAddress Memory address * @param[in] Data OR data * @param[in] DataMask Mask to be used before data write back to register. * @param[in] StdHeader Standard configuration header * */ VOID LibAmdMemRMW ( IN ACCESS_WIDTH AccessWidth, IN UINT64 MemAddress, IN CONST VOID *Data, IN CONST VOID *DataMask, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { UINT32 TempData = 0; UINT32 TempMask = 0; UINT32 Value; LibAmdGetDataFromPtr (AccessWidth, Data, DataMask, &TempData, &TempMask); LibAmdMemRead (AccessWidth, MemAddress, &Value, StdHeader); Value = (Value & (~TempMask)) | TempData; LibAmdMemWrite (AccessWidth, MemAddress, &Value, StdHeader); } /*---------------------------------------------------------------------------------------*/ /** * Poll Mmio * * Poll register until (RegisterValue & DataMask) == Data * * @param[in] AccessWidth Access width * @param[in] MemAddress Memory address * @param[in] Data Data to compare * @param[in] DataMask AND mask * @param[in] Delay Poll for time in 100ns (not supported) * @param[in] StdHeader Standard configuration header * */ VOID LibAmdMemPoll ( IN ACCESS_WIDTH AccessWidth, IN UINT64 MemAddress, IN CONST VOID *Data, IN CONST VOID *DataMask, IN UINT64 Delay, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { UINT32 TempData = 0; UINT32 TempMask = 0; UINT32 Value; LibAmdGetDataFromPtr (AccessWidth, Data, DataMask, &TempData, &TempMask); do { LibAmdMemRead (AccessWidth, MemAddress, &Value, StdHeader); } while (TempData != (Value & TempMask)); } /*---------------------------------------------------------------------------------------*/ /** * Read PCI config space * * * @param[in] AccessWidth Access width * @param[in] PciAddress Pci address * @param[in] Value Pointer to data * @param[in] StdHeader Standard configuration header * */ VOID LibAmdPciRead ( IN ACCESS_WIDTH AccessWidth, IN PCI_ADDR PciAddress, OUT VOID *Value, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { UINT32 LegacyPciAccess; UINT32 MMIOSize; UINT64 RMWrite; UINT64 RMWritePrevious; UINT64 MMIOAddress; ASSERT (StdHeader != NULL); ASSERT (PciAddress.AddressValue != ILLEGAL_SBDFO); if (!GetPciMmioAddress (&MMIOAddress, &MMIOSize, StdHeader)) { // We need to convert our "portable" PCI address into a "real" PCI access LegacyPciAccess = ((1 << 31) + (PciAddress.Address.Register & 0xFC) + (PciAddress.Address.Function << 8) + (PciAddress.Address.Device << 11) + (PciAddress.Address.Bus << 16) + ((PciAddress.Address.Register & 0xF00) << (24 - 8))); if (PciAddress.Address.Register <= 0xFF) { LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader); LibAmdIoRead (AccessWidth, IOCFC + (UINT16) (PciAddress.Address.Register & 0x3), Value, StdHeader); } else { LibAmdMsrRead (NB_CFG, &RMWritePrevious, StdHeader); RMWrite = RMWritePrevious | 0x0000400000000000ull; LibAmdMsrWrite (NB_CFG, &RMWrite, StdHeader); LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader); LibAmdIoRead (AccessWidth, IOCFC + (UINT16) (PciAddress.Address.Register & 0x3), Value, StdHeader); LibAmdMsrWrite (NB_CFG, &RMWritePrevious, StdHeader); } } else { // Setup the MMIO address ASSERT ((MMIOAddress + MMIOSize) > (MMIOAddress + (PciAddress.AddressValue & 0x0FFFFFFF))); MMIOAddress += (PciAddress.AddressValue & 0x0FFFFFFF); LibAmdMemRead (AccessWidth, MMIOAddress, Value, StdHeader); } } /*---------------------------------------------------------------------------------------*/ /** * Write PCI config space * * * @param[in] AccessWidth Access width * @param[in] PciAddress Pci address * @param[in] Value Pointer to data * @param[in] StdHeader Standard configuration header * */ VOID LibAmdPciWrite ( IN ACCESS_WIDTH AccessWidth, IN PCI_ADDR PciAddress, IN CONST VOID *Value, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { UINT32 LegacyPciAccess; UINT32 MMIOSize; UINT64 RMWrite; UINT64 RMWritePrevious; UINT64 MMIOAddress; ASSERT (StdHeader != NULL); ASSERT (PciAddress.AddressValue != ILLEGAL_SBDFO); if (!GetPciMmioAddress (&MMIOAddress, &MMIOSize, StdHeader)) { // We need to convert our "portable" PCI address into a "real" PCI access LegacyPciAccess = ((1 << 31) + (PciAddress.Address.Register & 0xFC) + (PciAddress.Address.Function << 8) + (PciAddress.Address.Device << 11) + (PciAddress.Address.Bus << 16) + ((PciAddress.Address.Register & 0xF00) << (24 - 8))); if (PciAddress.Address.Register <= 0xFF) { LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader); LibAmdIoWrite (AccessWidth, IOCFC + (UINT16) (PciAddress.Address.Register & 0x3), Value, StdHeader); } else { LibAmdMsrRead (NB_CFG, &RMWritePrevious, StdHeader); RMWrite = RMWritePrevious | 0x0000400000000000ull; LibAmdMsrWrite (NB_CFG, &RMWrite, StdHeader); LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader); LibAmdIoWrite (AccessWidth, IOCFC + (UINT16) (PciAddress.Address.Register & 0x3), Value, StdHeader); LibAmdMsrWrite (NB_CFG, &RMWritePrevious, StdHeader); } } else { // Setup the MMIO address ASSERT ((MMIOAddress + MMIOSize) > (MMIOAddress + (PciAddress.AddressValue & 0x0FFFFFFF))); MMIOAddress += (PciAddress.AddressValue & 0x0FFFFFFF); LibAmdMemWrite (AccessWidth, MMIOAddress, Value, StdHeader); } } /*---------------------------------------------------------------------------------------*/ /** * PCI read modify write * * * @param[in] AccessWidth Access width * @param[in] PciAddress Pci address * @param[in] Data OR Data * @param[in] DataMask Mask to be used before data write back to register. * @param[in] StdHeader Standard configuration header * */ VOID LibAmdPciRMW ( IN ACCESS_WIDTH AccessWidth, IN PCI_ADDR PciAddress, IN CONST VOID *Data, IN CONST VOID *DataMask, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { UINT32 TempData = 0; UINT32 TempMask = 0; UINT32 Value; LibAmdGetDataFromPtr (AccessWidth, Data, DataMask, &TempData, &TempMask); LibAmdPciRead (AccessWidth, PciAddress, &Value, StdHeader); Value = (Value & (~TempMask)) | TempData; LibAmdPciWrite (AccessWidth, PciAddress, &Value, StdHeader); } /*---------------------------------------------------------------------------------------*/ /** * Poll PCI config space register * * Poll register until (RegisterValue & DataMask) == Data * * @param[in] AccessWidth Access width * @param[in] PciAddress Pci address * @param[in] Data Data to compare * @param[in] DataMask AND mask * @param[in] Delay Poll for time in 100ns (not supported) * @param[in] StdHeader Standard configuration header * */ VOID LibAmdPciPoll ( IN ACCESS_WIDTH AccessWidth, IN PCI_ADDR PciAddress, IN CONST VOID *Data, IN CONST VOID *DataMask, IN UINT64 Delay, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { UINT32 TempData = 0; UINT32 TempMask = 0; UINT32 Value; LibAmdGetDataFromPtr (AccessWidth, Data, DataMask, &TempData, &TempMask); do { LibAmdPciRead (AccessWidth, PciAddress, &Value, StdHeader); } while (TempData != (Value & TempMask)); } /*---------------------------------------------------------------------------------------*/ /** * Get MMIO base address for PCI accesses * * @param[out] MmioAddress PCI MMIO base address * @param[out] MmioSize Size of region in bytes * @param[in] StdHeader Standard configuration header * * @retval TRUE MmioAddress/MmioSize are valid */ BOOLEAN STATIC GetPciMmioAddress ( OUT UINT64 *MmioAddress, OUT UINT32 *MmioSize, IN AMD_CONFIG_PARAMS *StdHeader ) { BOOLEAN MmioIsEnabled; UINT32 EncodedSize; UINT64 MsrReg; ASSERT (StdHeader != NULL); MmioIsEnabled = FALSE; LibAmdMsrRead (MSR_MMIO_Cfg_Base, &MsrReg, StdHeader); if ((MsrReg & BIT0) != 0) { *MmioAddress = MsrReg & 0xFFFFFFFFFFF00000ull; EncodedSize = (UINT32) ((MsrReg & 0x3C) >> 2); *MmioSize = ((1 << EncodedSize) * 0x100000); MmioIsEnabled = TRUE; } return MmioIsEnabled; } /*---------------------------------------------------------------------------------------*/ /** * Read field of PCI config register. * * * * @param[in] Address Pci address (register must be DWORD aligned) * @param[in] Highbit High bit position of the field in DWORD * @param[in] Lowbit Low bit position of the field in DWORD * @param[out] Value Pointer to data * @param[in] StdHeader Standard configuration header */ VOID LibAmdPciReadBits ( IN PCI_ADDR Address, IN UINT8 Highbit, IN UINT8 Lowbit, OUT UINT32 *Value, IN AMD_CONFIG_PARAMS *StdHeader ) { ASSERT (Highbit < 32 && Lowbit < 32 && Highbit >= Lowbit && (Address.AddressValue & 3) == 0); LibAmdPciRead (AccessWidth32, Address, Value, StdHeader); *Value >>= Lowbit; // Shift // A 1 << 32 == 1 << 0 due to x86 SHL instruction, so skip if that is the case if ((Highbit - Lowbit) != 31) { *Value &= (((UINT32) 1 << (Highbit - Lowbit + 1)) - 1); } } /*---------------------------------------------------------------------------------------*/ /** * Write field of PCI config register. * * * * @param[in] Address Pci address (register must be DWORD aligned) * @param[in] Highbit High bit position of the field in DWORD * @param[in] Lowbit Low bit position of the field in DWORD * @param[in] Value Pointer to data * @param[in] StdHeader Standard configuration header */ VOID LibAmdPciWriteBits ( IN PCI_ADDR Address, IN UINT8 Highbit, IN UINT8 Lowbit, IN CONST UINT32 *Value, IN AMD_CONFIG_PARAMS *StdHeader ) { UINT32 Temp; UINT32 Mask; ASSERT (Highbit < 32 && Lowbit < 32 && Highbit >= Lowbit && (Address.AddressValue & 3) == 0); // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case if ((Highbit - Lowbit) != 31) { Mask = (((UINT32) 1 << (Highbit - Lowbit + 1)) - 1); } else { Mask = (UINT32) 0xFFFFFFFF; } LibAmdPciRead (AccessWidth32, Address, &Temp, StdHeader); Temp &= ~(Mask << Lowbit); Temp |= (*Value & Mask) << Lowbit; LibAmdPciWrite (AccessWidth32, Address, &Temp, StdHeader); } /*---------------------------------------------------------------------------------------*/ /** * Locate next capability pointer * * Given a SBDFO this routine will find the next PCI capabilities list entry. * if the end of the list is reached, or if a problem is detected, then ILLEGAL_SBDFO is * returned. * To start a new search from the head of the list, specify a SBDFO with an offset of zero. * * @param[in,out] Address Pci address * @param[in] StdHeader Standard configuration header */ VOID LibAmdPciFindNextCap ( IN OUT PCI_ADDR *Address, IN AMD_CONFIG_PARAMS *StdHeader ) { PCI_ADDR Base; UINT32 Offset; UINT32 Temp; PCI_ADDR TempAddress; ASSERT (Address != NULL); ASSERT (*(UINT32 *) Address != ILLEGAL_SBDFO); Base.AddressValue = Address->AddressValue; Offset = Base.Address.Register; Base.Address.Register = 0; Address->AddressValue = (UINT32) ILLEGAL_SBDFO; // Verify that the SBDFO points to a valid PCI device SANITY CHECK LibAmdPciRead (AccessWidth32, Base, &Temp, StdHeader); if (Temp == 0xFFFFFFFF) { ASSERT (FALSE); return; // There is no device at this address } // Verify that the device supports a capability list TempAddress.AddressValue = Base.AddressValue + 0x04; LibAmdPciReadBits (TempAddress, 20, 20, &Temp, StdHeader); if (Temp == 0) { return; // This PCI device does not support capability lists } if (Offset != 0) { // If we are continuing on an existing list TempAddress.AddressValue = Base.AddressValue + Offset; LibAmdPciReadBits (TempAddress, 15, 8, &Temp, StdHeader); } else { // We are starting on a new list TempAddress.AddressValue = Base.AddressValue + 0x34; LibAmdPciReadBits (TempAddress, 7, 0, &Temp, StdHeader); } if (Temp == 0) { return; // We have reached the end of the capabilities list } // Error detection and recovery- The statement below protects against // PCI devices with broken PCI capabilities lists. Detect a pointer // that is not uint32 aligned, points into the first 64 reserved DWORDs // or points back to itself. if (((Temp & 3) != 0) || (Temp == Offset) || (Temp < 0x40)) { ASSERT (FALSE); return; } Address->AddressValue = Base.AddressValue + Temp; return; } /*---------------------------------------------------------------------------------------*/ /** * Set memory with value * * * @param[in,out] Destination Pointer to memory range * @param[in] Value Value to set memory with * @param[in] FillLength Size of the memory range * @param[in] StdHeader Standard configuration header (Optional) */ VOID LibAmdMemFill ( IN VOID *Destination, IN UINT8 Value, IN UINTN FillLength, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { UINT8 *Dest; ASSERT (StdHeader != NULL); Dest = Destination; while ((FillLength--) != 0) { *Dest++ = Value; } } /*---------------------------------------------------------------------------------------*/ /** * Copy memory * * * @param[in,out] Destination Pointer to destination buffer * @param[in] Source Pointer to source buffer * @param[in] CopyLength buffer length * @param[in] StdHeader Standard configuration header (Optional) */ VOID LibAmdMemCopy ( IN VOID *Destination, IN CONST VOID *Source, IN UINTN CopyLength, IN OUT AMD_CONFIG_PARAMS *StdHeader ) { UINT8 *Dest; CONST UINT8 *SourcePtr; ASSERT (StdHeader != NULL); Dest = Destination; SourcePtr = Source; while ((CopyLength--) != 0) { *Dest++ = *SourcePtr++; } } /*---------------------------------------------------------------------------------------*/ /** * Returns the package type mask for the processor * * * @param[in] StdHeader Standard configuration header (Optional) */ // Returns the package type mask for the processor UINT32 LibAmdGetPackageType ( IN AMD_CONFIG_PARAMS *StdHeader ) { UINT32 ProcessorPackageType; CPUID_DATA CpuId; LibAmdCpuidRead (0x80000001, &CpuId, StdHeader); ProcessorPackageType = (UINT32) (CpuId.EBX_Reg >> 28) & 0xF; // bit 31:28 return (UINT32) (1 << ProcessorPackageType); } /*---------------------------------------------------------------------------------------*/ /** * Returns the package type mask for the processor * * * @param[in] AccessWidth Access width * @param[in] Data data * @param[in] DataMask data * @param[out] TemData typecast data * @param[out] TempDataMask typecast data */ VOID STATIC LibAmdGetDataFromPtr ( IN ACCESS_WIDTH AccessWidth, IN CONST VOID *Data, IN CONST VOID *DataMask, OUT UINT32 *TemData, OUT UINT32 *TempDataMask ) { switch (AccessWidth) { case AccessWidth8: case AccessS3SaveWidth8: *TemData = (UINT32)*(UINT8 *) Data; *TempDataMask = (UINT32)*(UINT8 *) DataMask; break; case AccessWidth16: case AccessS3SaveWidth16: *TemData = (UINT32)*(UINT16 *) Data; *TempDataMask = (UINT32)*(UINT16 *) DataMask; break; case AccessWidth32: case AccessS3SaveWidth32: *TemData = *(UINT32 *) Data; *TempDataMask = *(UINT32 *) DataMask; break; default: IDS_ERROR_TRAP; break; } } /*---------------------------------------------------------------------------------------*/ /** * Returns the package type mask for the processor * * * @param[in] AccessWidth Access width * @retval Width in number of bytes */ UINT8 LibAmdAccessWidth ( IN ACCESS_WIDTH AccessWidth ) { UINT8 Width; switch (AccessWidth) { case AccessWidth8: case AccessS3SaveWidth8: Width = 1; break; case AccessWidth16: case AccessS3SaveWidth16: Width = 2; break; case AccessWidth32: case AccessS3SaveWidth32: Width = 4; break; case AccessWidth64: case AccessS3SaveWidth64: Width = 8; break; default: Width = 0; IDS_ERROR_TRAP; break; } return Width; } VOID CpuidRead ( IN UINT32 CpuidFcnAddress, OUT CPUID_DATA *Value ) { __cpuid ((int *)Value, CpuidFcnAddress); } UINT8 ReadNumberOfCpuCores( VOID ) { CPUID_DATA Value; CpuidRead (0x80000008, &Value); return Value.ECX_Reg & 0xff; }