/* SPDX-License-Identifier: GPL-2.0-only */ /* * Include this file into a mainboard's DSDT _SB device tree and it will * expose the SCH5545 SuperIO and some of its functionality. * * It allows the change of IO ports, IRQs and DMA settings on logical * devices, disabling and reenabling logical devices and controlling power * saving mode on logical devices or the whole chip. * * LDN State * 0x0 FDC Not implemented * 0x3 PP Not implemented * 0x4 UARTA Implemented and tested * 0x5 UARTB Implemented * 0x7 KBC Implemented and tested * * Controllable through preprocessor defines: * SUPERIO_PNP_BASE I/O address of the first PnP configuration register * SCH5545_SHOW_UARTA If defined, UARTA will be exposed. * SCH5545_SHOW_UARTB If defined, UARTB will be exposed. * SCH5545_SHOW_KBC If defined, the KBC will be exposed. * SCH5545_EMI_BASE If defined, the Embedded Memory Interface resource will be exposed. * SCH5545_RUNTIME_BASE If defined, The Runtime Registers resource will be exposed. */ #undef SUPERIO_CHIP_NAME #define SUPERIO_CHIP_NAME SCH5545 #include #undef PNP_DEFAULT_PSC #define PNP_DEFAULT_PSC Return (0) /* no power management */ /* * Common helpers will not work on this chip. IO, DMA and IRQ resources. * These are accessed via LPC interface LDN 0xC. */ #undef PNP_READ_IO #undef PNP_READ_IRQ #undef PNP_READ_DMA #undef PNP_WRITE_IO #undef PNP_WRITE_IRQ #undef PNP_WRITE_DMA Device(SIO1) { Name (_HID, EisaId("PNP0A05")) Name (_STR, Unicode("SMSC SCH5545 Super I/O")) Name (_UID, SUPERIO_UID(SIO1,)) #ifdef SCH5545_EMI_BASE Name (IO1B, SCH5545_EMI_BASE) #endif #ifdef SCH5545_RUNTIME_BASE Name (IO2B, SCH5545_RUNTIME_BASE) #endif Name (IOST, 0x0001) /* IO decoding status */ Name (MSFG, 1) /* Mouse wake config */ Name (KBFG, 1) /* Keyboard wake config */ /* SuperIO configuration ports */ OperationRegion (CREG, SystemIO, SUPERIO_PNP_BASE, 0x02) Field (CREG, ByteAcc, NoLock, Preserve) { PNP_ADDR_REG, 8, PNP_DATA_REG, 8 } IndexField (PNP_ADDR_REG, PNP_DATA_REG, ByteAcc, NoLock, Preserve) { Offset (0x07), PNP_LOGICAL_DEVICE, 8, /* Logical device selector */ Offset (0x30), PNP_DEVICE_ACTIVE, 1, /* Logical device activation */ Offset (0x69), CR69, 8, /* UART1 Base address Registers */ CR6A, 8, CR6B, 8, Offset (0x6D), CR6D, 8, /* UART2 Base address Registers */ CR6E, 8, CR6F, 8, Offset (0x7D), CR7D, 8, /* FD Base address Registers */ CR7E, 8, CR7F, 8, Offset (0x81), CR81, 8, /* LPT Base address Registers */ CR82, 8, CR83, 8, Offset (0xF0), OPT0, 8, /* MISC registers */ OPT1, 8, OPT2, 8, OPT3, 8, OPT4, 8, OPT5, 8 } #ifdef SCH5545_RUNTIME_BASE /* Runtime registers */ OperationRegion (RNTR, SystemIO, SCH5545_RUNTIME_BASE, 0x40) Field (RNTR, ByteAcc, NoLock, Preserve) { PMES, 1, /* PME Global Status */ Offset (0x01), PMEN, 1, /* PME Global Enable */ Offset (0x02), PMS1, 8, /* PME Status 1 for KBD and PS2M */ PMS2, 8, /* PME Status 2 for EC, WDT, Bat, Intruder */ PMS3, 8, /* PME Status 3 for GPIOs */ PME1, 8, /* PME Enable 1 for KBD and PS2M */ PME2, 8, /* PME Enable 2 for EC, WDT, Bat, Intruder */ PME3, 8, /* PME Enable 3 for GPIOs */ Offset (0x10), SOIS, 1, /* SMI Global Status*/ Offset (0x11), SOIE, 1, /* SMI Global Enable */ Offset (0x12), SST1, 8, /* SMI Status 1 for UARTs, LPT, FD, EC, Bat */ SST2, 8, /* SMI Status 2 for KBD, PS2M, WDT, Intruder */ SST3, 8, /* SMI Status 3 for GPIOs */ Offset (0x16), SEN1, 8, /* SMI Enable 1 for UARTs, LPT, FD, EC, Bat */ SEN2, 8, /* SMI Enable 2 for KBD, PS2M, WDT, Intruder */ SEN3, 8, /* SMI Enable 3 for GPIOs */ Offset (0x25), LED1, 8, /* LED control register */ Offset (0x28), GPSR, 8, /* GPIO Select Register */ GPRR, 8 /* GPIO Read Register */ } #endif Name (CRS, ResourceTemplate () { IO (Decode16, 0x0000, 0x0000, 0x00, 0x00, _Y11) #ifdef SCH5545_EMI_BASE IO (Decode16, 0x0000, 0x0000, 0x00, 0x00, _Y12) #endif #ifdef SCH5545_RUNTIME_BASE IO (Decode16, 0x0000, 0x0000, 0x00, 0x00, _Y13) #endif }) Method (_CRS, 0, NotSerialized) { If (SUPERIO_PNP_BASE) { CreateWordField (CRS, \_SB.PCI0.LPCB.SIO1._Y11._MIN, GPI0) CreateWordField (CRS, \_SB.PCI0.LPCB.SIO1._Y11._MAX, GPI1) CreateByteField (CRS, \_SB.PCI0.LPCB.SIO1._Y11._LEN, GPIL) GPI0 = SUPERIO_PNP_BASE GPI1 = SUPERIO_PNP_BASE GPIL = 0x02 } #ifdef SCH5545_EMI_BASE If (IO1B) { CreateWordField (CRS, \_SB.PCI0.LPCB.SIO1._Y12._MIN, GP10) CreateWordField (CRS, \_SB.PCI0.LPCB.SIO1._Y12._MAX, GP11) CreateByteField (CRS, \_SB.PCI0.LPCB.SIO1._Y12._LEN, GPL1) GP10 = SCH5545_EMI_BASE GP11 = SCH5545_EMI_BASE GPL1 = 0x10 } #endif #ifdef SCH5545_RUNTIME_BASE If (IO2B) { CreateWordField (CRS, \_SB.PCI0.LPCB.SIO1._Y13._MIN, GP20) CreateWordField (CRS, \_SB.PCI0.LPCB.SIO1._Y13._MAX, GP21) CreateByteField (CRS, \_SB.PCI0.LPCB.SIO1._Y13._LEN, GPL2) GP20 = SCH5545_RUNTIME_BASE GP21 = SCH5545_RUNTIME_BASE GPL2 = 0x40 } #endif Return (CRS) } #undef PNP_ENTER_MAGIC_1ST #undef PNP_ENTER_MAGIC_2ND #undef PNP_ENTER_MAGIC_3RD #undef PNP_ENTER_MAGIC_4TH #undef PNP_EXIT_MAGIC_1ST #undef PNP_EXIT_SPECIAL_REG #undef PNP_EXIT_SPECIAL_VAL #define PNP_ENTER_MAGIC_1ST 0x55 #define PNP_EXIT_MAGIC_1ST 0xaa #include #define SUPERIO_LPC_LDN 0x0C #include "resource_helpers.asl" #ifdef SCH5545_SHOW_KBC Device (PS2K) { Name (_HID, EisaId ("PNP0303")) Name (_CID, EisaId ("PNP030B")) Method (_STA, 0, NotSerialized) { Return (DSTA (0xa)) } Name (_CRS, ResourceTemplate () { IO (Decode16, 0x0060, 0x0060, 0x00, 0x01, ) IO (Decode16, 0x0064, 0x0064, 0x00, 0x01, ) IRQ (Edge, ActiveHigh, Exclusive) {1} }) Method (_PSW, 1, NotSerialized) // _PSW: Power State Wake { KBFG = Arg0 } Name (_PRW, Package() { 8, 3 }) } Device (PS2M) { Name (_HID, EisaId ("PNP0F13")) Method (_STA, 0, NotSerialized) { Return (DSTA (0xe)) } Name (_CRS, ResourceTemplate () { IRQ (Edge, ActiveHigh, Exclusive) {12} }) Method (_PSW, 1, NotSerialized) { MSFG = Arg0 } Name (_PRW, Package() { 8, 3 }) } OperationRegion (IOKP, SystemIO, 0x60, 0x05) Field (IOKP, ByteAcc, NoLock, Preserve) { KP60, 8, Offset (0x04), KP64, 8 } OperationRegion (KB64, SystemIO, 0x64, 1) Field (KB64, ByteAcc, NoLock, Preserve) { , 1, KRDY, 1, Offset (0x01) } #ifdef SCH5545_RUNTIME_BASE /* SIO prepare to sleep */ Method (SIOS, 1, NotSerialized) { If ((Arg0 == 0x03) | (Arg0 == 1)) { ENTER_CONFIG_MODE (1) Local0 = OPT0 OPT0 = (Local0 | 0x60) EXIT_CONFIG_MODE () Local0 = PMS1 PMS1 = (Local0 | 0x18) Local0 = PMES PMES = (Local0 | 1) Local0 = PME1 If (KBFG) { PME1 = (Local0 | 0x08) } Else { PME1 = (Local0 & 0xF7) } Local0 = PME1 If (MSFG) { PME1 = (Local0 | 0x10) } Else { PME1 = (Local0 & 0xEF) } Local0 = PMEN PMEN = (Local0 | 1) While (KRDY) {} KP60 = 0xED While (KRDY) {} KP60 = 0 While (KRDY) {} KP60 = 0xF4 Sleep (1) } } Method (GPKM, 0, NotSerialized) { Local0 = PME1 PME1 = (Local0 & 0xE7) Local0 = PMEN PMEN = (Local0 & 0xFE) Local0 = PMS1 PMS1 = (Local0 & 0x18) Local0 = PMES PMES = (Local0 & 1) } /* SIO wake method */ Method (SIOW, 1, NotSerialized) { If (Arg0 == 1) { GPKM () ENTER_CONFIG_MODE (1) Local0 = OPT0 OPT0 = (Local0 & 0x9F) EXIT_CONFIG_MODE () } If (Arg0 == 0x03) { GPKM () ENTER_CONFIG_MODE (1) Local0 = OPT0 OPT0 = (Local0 & 0x9F) OPT2 |= 1 OPT2 &= 0xFE EXIT_CONFIG_MODE () } } Method (SIOH, 0, NotSerialized) { Local0 = PMS1 If (Local0 & 0x08) { PMS1 = 0x08 Notify (PS2K, 0x02) // Device Wake } If (Local0 & 0x10) { PMS1 = 0x10 Notify (PS2M, 0x02) // Device Wake } If (Local0 & 0x04) { PMS1 = 0x04 #ifdef SCH5545_SHOW_UARTA Notify (UAR1, 0x02) // Device Wake #endif } If (Local0 & 0x02) { PMS1 = 0x02 #ifdef SCH5545_SHOW_UARTB Notify (UAR2, 0x02) // Device Wake #endif } Local0 = PMES PMES = (Local0 & 1) } #endif // SCH5545_RUNTIME_BASE #endif // SCH5545_SHOW_KBC #ifdef SCH5545_SHOW_UARTA #define SUPERIO_UARTA_LDN 7 Device (UAR1) { Name (_HID, EisaId ("PNP0501")) Name (_UID, SUPERIO_UID(SER, SUPERIO_UARTA_LDN)) Method (_STA, 0, NotSerialized) { Return (DSTA (0)) } Method (_DIS, 0, NotSerialized) { DCNT (0, 0) } Method (_CRS, 0, NotSerialized) { Return (DCRS (0, 0)) } Method (_SRS, 1, NotSerialized) { CreateWordField (Arg0, 0x02, IO11) CreateWordField (Arg0, 0x09, IRQM) ENTER_CONFIG_MODE (SUPERIO_LPC_LDN) STIO (0x6A, IO11) SIRQ (0, IRQM) EXIT_CONFIG_MODE () DCNT (0, 1) } Name (_PRS, ResourceTemplate () { StartDependentFn (0x00, 0x00) { IO (Decode16, 0x03F8, 0x03F8, 0x01, 0x08, ) IRQNoFlags () {4} DMA (Compatibility, NotBusMaster, Transfer8, ) {} } StartDependentFn (0x00, 0x00) { IO (Decode16, 0x02F8, 0x02F8, 0x01, 0x08, ) IRQNoFlags () {3} DMA (Compatibility, NotBusMaster, Transfer8, ) {} } StartDependentFn (0x00, 0x00) { IO (Decode16, 0x03E8, 0x03E8, 0x01, 0x08, ) IRQNoFlags () {4} DMA (Compatibility, NotBusMaster, Transfer8, ) {} } StartDependentFn (0x00, 0x00) { IO (Decode16, 0x02E8, 0x02E8, 0x01, 0x08, ) IRQNoFlags () {3} DMA (Compatibility, NotBusMaster, Transfer8, ) {} } EndDependentFn () }) Name (_PRW, Package() { 8, 3 }) } #endif #ifdef SCH5545_SHOW_UARTB #define SUPERIO_UARTB_LDN 8 Device (UAR2) { Name (_HID, EisaId ("PNP0501")) Name (_UID, SUPERIO_UID(SER, SUPERIO_UARTB_LDN)) Method (_STA, 0, NotSerialized) { Return (DSTA (1)) } Method (_DIS, 0, NotSerialized) { DCNT (1, 0) } Method (_CRS, 0, NotSerialized) { Return (DCRS (1, 0)) } Method (_SRS, 1, NotSerialized) { CreateWordField (Arg0, 0x02, IO11) CreateWordField (Arg0, 0x09, IRQM) ENTER_CONFIG_MODE (SUPERIO_LPC_LDN) STIO (0x6E, IO11) SIRQ (1, IRQM) EXIT_CONFIG_MODE () DCNT (1, 1) } Name (_PRS, ResourceTemplate () { StartDependentFn (0x00, 0x00) { IO (Decode16, 0x03F8, 0x03F8, 0x01, 0x08, ) IRQNoFlags () {4} DMA (Compatibility, NotBusMaster, Transfer8, ) {} } StartDependentFn (0x00, 0x00) { IO (Decode16, 0x02F8, 0x02F8, 0x01, 0x08, ) IRQNoFlags () {3} DMA (Compatibility, NotBusMaster, Transfer8, ) {} } StartDependentFn (0x00, 0x00) { IO (Decode16, 0x03E8, 0x03E8, 0x01, 0x08, ) IRQNoFlags () {4} DMA (Compatibility, NotBusMaster, Transfer8, ) {} } StartDependentFn (0x00, 0x00) { IO (Decode16, 0x02E8, 0x02E8, 0x01, 0x08, ) IRQNoFlags () {3} DMA (Compatibility, NotBusMaster, Transfer8, ) {} } EndDependentFn () }) Name (_PRW, Package() { 8, 3 }) } #endif }