/* SPDX-License-Identifier: GPL-2.0-or-later */

#ifndef SUPERIO_NUVOTON_NPCD378_H
#define SUPERIO_NUVOTON_NPCD378_H

#include <stdint.h>

/* HWM at LDN8 */
#define NPCD837_HWM_WRITE_LOCK_CTRL 0x4
#define NPCD837_HWM_WRITE_LOCK_BIT 0x1

#define NPCD378_HWM_PSU_FAN_MIN 0x17
#define NPCD378_HWM_PSU_FAN_MAX 0xf8
#define NPCD378_HWM_PSU_FAN_PWM_CTRL 0x198

/*
 * Read HWM register at specific page and offset.
 *
 * @param iobase IOBASE address of LDN8
 * @param reg MSB is page, LSB sets the offset in selected page
 *
 * @return Byte read from HWM
 */
uint8_t npcd378_hwm_read(const uint16_t iobase, const uint16_t reg);

/*
 * Write to HWM register at specific page and offset.
 *
 * @param iobase IOBASE address of LDN8
 * @param reg MSB is page, LSB sets the offset in selected page
 * @param val The value to write to HWM register
 */
void npcd378_hwm_write(const uint16_t iobase, const uint16_t reg, const uint8_t val);

/*
 * Notify SuperIO a host-to-device transfer is ongoing.
 * Has to be called before any register in HWM is written to.
 *
 * @param iobase IOBASE address of LDN8
 */
void npcd378_hwm_write_start(const uint16_t iobase);

/*
 * Notify SuperIO a host-to-device transfer has finished.
 * Has to be called after any register in HWM was written to.
 *
 * @param iobase IOBASE address of LDN8
 */
void npcd378_hwm_write_finished(const uint16_t iobase);

/* Logical Device Numbers (LDN). */
/* Default Nuvoton hardware: */
#define NPCD378_FDC		0x00 /* Floppy */
#define NPCD378_PP		0x01 /* Parallel port */
#define NPCD378_SP1		0x02 /* Com1 */
#define NPCD378_SP2		0x03 /* Com2 & IR */
#define NPCD378_PWR		0x04 /* LED and PWR button control */
#define NPCD378_AUX		0x05 /* PS/2 mouse */
#define NPCD378_KBC		0x06 /* PS/2 keyboard */
/* The following is guessed based on observation and might be wrong: */
#define NPCD378_WDT1		0x07
#define NPCD378_HWM		0x08 /* HWM: 16 pages with each 255 byte */
#define NPCD378_GPIO_PP_OD	0x0F /* GPIO Push-Pull/Open drain select */
#define NPCD378_I2C		0x15 /* Provides 35Khz at IOBASE + 0x9 */
#define NPCD378_SUSPEND		0x1c /* Suspend control ? */
#define NPCD378_GPIOA		0x1e

#endif /* SUPERIO_NUVOTON_NPCD378_H */