/* * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. * Copyright (C) 2014 Edward O'Callaghan * Copyright (C) 2014 Felix Held * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /* * A generic romstage (pre-ram) driver for Nuvoton variant Super I/O chips. * * The following is derived directly from the vendor Nuvoton's data-sheets: * * To toggle between `configuration mode` and `normal operation mode` as to * manipulate the various LDN's in Nuvoton Super I/O's we are required to * pass magic numbers `passwords keys`. * * NUVOTON_ENTRY_KEY := enable configuration : 0x87 * NUVOTON_EXIT_KEY := disable configuration : 0xAA * * To modify a LDN's configuration register, we use the index port to select * the index of the LDN and then write to the data port to alter the * parameters. A default index, data port pair is 0x4E, 0x4F respectively, a * user modified pair is 0x2E, 0x2F respectively. * */ #include #include #include #include "nuvoton.h" #define NUVOTON_ENTRY_KEY 0x87 #define NUVOTON_EXIT_KEY 0xAA /* Enable configuration: pass entry key '0x87' into index port dev * two times. */ static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(NUVOTON_ENTRY_KEY, port); outb(NUVOTON_ENTRY_KEY, port); } /* Disable configuration: pass exit key '0xAA' into index port dev. */ static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(NUVOTON_EXIT_KEY, port); } /* Bring up early serial debugging output before the RAM is initialized. */ void nuvoton_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_conf_state(dev); pnp_set_logical_device(dev); pnp_set_enable(dev, 0); pnp_set_iobase(dev, PNP_IDX_IO0, iobase); pnp_set_enable(dev, 1); pnp_exit_conf_state(dev); }