/* * This file is part of the coreboot project. * * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include "it8772f.h" /* NOTICE: This file is deprecated, use ite/common instead */ /* RAMstage equiv */ /* u8 pnp_read_config(device_t dev, u8 reg) */ u8 it8772f_sio_read(device_t dev, u8 reg) { u16 port = dev >> 8; outb(reg, port); return inb(port + 1); } /* RAMstage equiv */ /* void pnp_write_config(device_t dev, u8 reg, u8 value) */ void it8772f_sio_write(device_t dev, u8 reg, u8 value) { u16 port = dev >> 8; outb(reg, port); outb(value, port + 1); } void it8772f_enter_conf(device_t dev) { u16 port = dev >> 8; outb(0x87, port); outb(0x01, port); outb(0x55, port); outb((port == 0x4e) ? 0xaa : 0x55, port); } void it8772f_exit_conf(device_t dev) { it8772f_sio_write(dev, IT8772F_CONFIG_REG_CC, 0x02); } /* Set AC resume to be up to the Southbridge */ void it8772f_ac_resume_southbridge(device_t dev) { it8772f_enter_conf(dev); it8772f_sio_write(dev, IT8772F_CONFIG_REG_LDN, IT8772F_EC); it8772f_sio_write(dev, 0xf4, 0x60); it8772f_exit_conf(dev); } /* Configure a set of GPIOs */ void it8772f_gpio_setup(device_t dev, int set, u8 select, u8 polarity, u8 pullup, u8 output, u8 enable) { set--; /* Set 1 is offset 0 */ it8772f_enter_conf(dev); it8772f_sio_write(dev, IT8772F_CONFIG_REG_LDN, IT8772F_GPIO); if (set < 5) { it8772f_sio_write(dev, GPIO_REG_SELECT(set), select); it8772f_sio_write(dev, GPIO_REG_ENABLE(set), enable); it8772f_sio_write(dev, GPIO_REG_POLARITY(set), polarity); } it8772f_sio_write(dev, GPIO_REG_OUTPUT(set), output); it8772f_sio_write(dev, GPIO_REG_PULLUP(set), pullup); it8772f_exit_conf(dev); }