/* * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH * Andreas Heppel * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * Initialisation of the PCI-to-ISA bridge and disabling the BIOS * write protection (for flash) in function 0 of the chip. * Enabling function 1 (IDE controller of the chip. */ #include #include #include #include #include "w83c553f.h" #include "chip.h" #ifndef CONFIG_ISA_MEM #define CONFIG_ISA_MEM 0xFD000000 #endif #ifndef CONFIG_ISA_IO #define CONFIG_ISA_IO 0xFE000000 #endif #ifndef CONFIG_IDE_MAXBUS #define CONFIG_IDE_MAXBUS 2 #endif #ifndef CONFIG_IDE_MAXDEVICE #define CONFIG_IDE_MAXDEVICE (CONFIG_IDE_MAXBUS*2) #endif uint32_t ide_bus_offset[CONFIG_IDE_MAXBUS]; void initialise_pic(void); void initialise_dma(void); extern struct pci_ops pci_direct_ppc; #if 0 void southbridge_early_init(void) { unsigned char reg8; /* * Set ISA memory space */ pci_direct_ppc.read_byte(0, 0x58, W83C553F_IPADCR, ®8); /* 16 MB ISA memory space */ reg8 |= (W83C553F_IPADCR_IPATOM4 | W83C553F_IPADCR_IPATOM5 | W83C553F_IPADCR_IPATOM6 | W83C553F_IPADCR_IPATOM7); reg8 &= ~W83C553F_IPADCR_MBE512; pci_direct_ppc.write_byte(0, 0x58, W83C553F_IPADCR, ®8); } #endif void w83c553_init(void) { struct device *dev; unsigned char reg8; unsigned short reg16; unsigned int reg32; dev = dev_find_device(W83C553F_VID, W83C553F_DID, 0); if (dev == 0) { printk_info("Error: Cannot find W83C553F controller on any PCI bus\n"); return; } printk_info("Found W83C553F controller\n"); /* always enabled */ #if 0 reg16 = pci_read_config16(dev, PCI_COMMAND); reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; pci_write_config16(dev, PCI_COMMAND, reg16); #endif /* * Set ISA memory space */ reg8 = pci_read_config8(dev, W83C553F_IPADCR); /* 16 MB ISA memory space */ reg8 |= (W83C553F_IPADCR_IPATOM4 | W83C553F_IPADCR_IPATOM5 | W83C553F_IPADCR_IPATOM6 | W83C553F_IPADCR_IPATOM7); reg8 &= ~W83C553F_IPADCR_MBE512; pci_write_config8(dev, W83C553F_IPADCR, reg8); /* * Chip select: switch off BIOS write protection */ reg8 = pci_read_config8(dev, W83C553F_CSCR); reg8 |= W83C553F_CSCR_UBIOSCSE; reg8 &= ~W83C553F_CSCR_BIOSWP; pci_write_config8(dev, W83C553F_CSCR, reg8); /* * Enable Port 92 */ reg8 = W83C553F_ATSCR_P92E | W83C553F_ATSCR_KRCEE; pci_write_config8(dev, W83C553F_CSCR, reg8); /* * Route IDE interrupts to IRQ 14 & 15 on 8259. */ pci_write_config8(dev, W83C553F_IDEIRCR, 0xef); pci_write_config16(dev, W83C553F_PCIIRCR, 0x0000); /* * Read IDE bus offsets from function 1 device. * We must unmask the LSB indicating that it is an IO address. */ dev = dev_find_device(W83C553F_VID, W83C553F_IDE, 0); if (dev == 0) { printk_info("Error: Cannot find W83C553F function 1 device\n"); return; } /* * Enable native mode on IDE ports and set base address. */ reg8 = W83C553F_PIR_P1NL | W83C553F_PIR_P0NL; pci_write_config8(dev, W83C553F_PIR, reg8); pci_write_config32(dev, PCI_BASE_ADDRESS_0, 0xffffffff); reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_0); pci_write_config32(dev, PCI_BASE_ADDRESS_0, 0x1f0); reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_0); pci_write_config32(dev, PCI_BASE_ADDRESS_1, 0xffffffff); reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_1); pci_write_config32(dev, PCI_BASE_ADDRESS_1, 0x3f6); reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_1); pci_write_config32(dev, PCI_BASE_ADDRESS_2, 0xffffffff); reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_2); pci_write_config32(dev, PCI_BASE_ADDRESS_2, 0x170); reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_2); pci_write_config32(dev, PCI_BASE_ADDRESS_3, 0xffffffff); reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_3); pci_write_config32(dev, PCI_BASE_ADDRESS_3, 0x376); reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_3); /* * Set read-ahead duration to 0xff * Enable P0 and P1 */ reg32 = 0x00ff0000 | W83C553F_IDECSR_P1EN | W83C553F_IDECSR_P0EN; pci_write_config32(dev, W83C553F_IDECSR, reg32); ide_bus_offset[0] = pci_read_config32(dev, PCI_BASE_ADDRESS_0); printk_debug("ide bus offset = 0x%x\n", ide_bus_offset[0]); ide_bus_offset[0] &= ~1; #if CONFIG_IDE_MAXBUS > 1 ide_bus_offset[1] = pci_read_config32(dev, PCI_BASE_ADDRESS_2); ide_bus_offset[1] &= ~1; #endif /* * Enable function 1, IDE -> busmastering and IO space access */ reg16 = pci_read_config16(dev, PCI_COMMAND); reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO; pci_write_config16(dev, PCI_COMMAND, reg16); reg16 = pci_read_config16(dev, PCI_COMMAND); /* * Initialise ISA interrupt controller */ initialise_pic(); /* * Initialise DMA controller */ initialise_dma(); printk_info("W83C553F configuration complete\n"); } void initialise_pic(void) { outb(W83C553F_PIC1_ICW1, 0x11); /* start init sequence, ICW4 needed */ outb(W83C553F_PIC1_ICW2, 0x08); /* base address 00001 */ outb(W83C553F_PIC1_ICW3, 0x04); /* slave on IRQ2 */ outb(W83C553F_PIC1_ICW4, 0x01); /* x86 mode */ outb(W83C553F_PIC1_OCW1, 0xfb); /* enable IRQ 2 */ outb(W83C553F_PIC1_ELC, 0xf8); /* all IRQ's edge sensitive */ outb(W83C553F_PIC2_ICW1, 0x11); /* start init sequence, ICW4 needed */ outb(W83C553F_PIC2_ICW2, 0x08); /* base address 00001 */ outb(W83C553F_PIC2_ICW3, 0x02); /* slave ID 2 */ outb(W83C553F_PIC2_ICW4, 0x01); /* x86 mode */ outb(W83C553F_PIC2_OCW1, 0xff); /* disable all IRQ's */ outb(W83C553F_PIC2_ELC, 0xde); /* all IRQ's edge sensitive */ outb(W83C553F_TMR1_CMOD, 0x74); outb(W83C553F_PIC2_OCW1, 0x20); outb(W83C553F_PIC1_OCW1, 0x20); outb(W83C553F_PIC2_OCW1, 0x2b); outb(W83C553F_PIC1_OCW1, 0x2b); } void initialise_dma(void) { unsigned int channel; unsigned int rvalue1, rvalue2; /* perform a H/W reset of the devices */ outb(W83C553F_DMA1 + W83C553F_DMA1_MC, 0x00); outw(W83C553F_DMA2 + W83C553F_DMA2_MC, 0x0000); /* initialise all channels to a sane state */ for (channel = 0; channel < 4; channel++) { /* * dependent upon the channel, setup the specifics: * * demand * address-increment * autoinitialize-disable * verify-transfer */ switch (channel) { case 0: rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH0SEL|W83C553F_MODE_TT_VERIFY); rvalue2 = (W83C553F_MODE_TM_CASCADE|W83C553F_MODE_CH0SEL); break; case 1: rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); break; case 2: rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); break; case 3: rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); break; default: rvalue1 = 0x00; rvalue2 = 0x00; break; } /* write to write mode registers */ outb(W83C553F_DMA1 + W83C553F_DMA1_WM, rvalue1 & 0xFF); outw(W83C553F_DMA2 + W83C553F_DMA2_WM, rvalue2 & 0x00FF); } /* enable all channels */ outb(W83C553F_DMA1 + W83C553F_DMA1_CM, 0x00); outw(W83C553F_DMA2 + W83C553F_DMA2_CM, 0x0000); /* * initialize the global DMA configuration * * DACK# active low * DREQ active high * fixed priority * channel group enable */ outb(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00); outw(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000); } void southbridge_init(struct chip *chip, enum chip_pass pass) { struct southbridge_winbond_w83c553_config *conf = (struct southbridge_winbond_w83c553_config *)chip->chip_info; switch (pass) { case CONF_PASS_POST_PCI: w83c553_init(); break; default: /* nothing yet */ break; } } struct chip_control southbridge_winbond_w83c553_control = { enable: southbridge_init, name: "Winbond W83C553" };