/* * This file is part of the coreboot project. * * Copyright (C) 2007 Rudolf Marek * Copyright (C) 2011 Alexandru Gagniuc * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc. */ /* * Seems the link and width of HT link needs to be setup too, you need to * generate PCI reset or LDTSTOP to apply. */ #include #include #include #include "k8x8xx.h" /* The 256 bytes of NVRAM for S3 storage, 256B aligned */ #define K8T890_NVRAM_IO_BASE 0xf00 #define K8T890_MULTIPLE_FN_EN 0x4f /* AMD K8 LDT0, LDT1, LDT2 Link Control Registers */ static u8 ldtreg[3] = {0x86, 0xa6, 0xc6}; #if CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8T800_OLD #define K8X8XX_HT_CFG_BASE 0xc0 #else #define K8X8XX_HT_CFG_BASE 0x60 #endif /* This functions sets KT890 link frequency and width to same values as * it has been setup on K8 side, by AMD NB init. * This will not work for K8T800_OLD, which has a slightly different * register arrangement (device 3188) */ u8 k8t890_early_setup_ht(void) { u8 awidth, afreq, cldtfreq; u8 cldtwidth_in, cldtwidth_out, vldtwidth_in, vldtwidth_out, ldtnr, width; u16 vldtcaps; #if !CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8T800_OLD u8 reg; /* hack, enable NVRAM in chipset */ pci_write_config8(PCI_DEV(0, 0x0, 0), K8T890_MULTIPLE_FN_EN, 0x01); /* * NVRAM I/O base at K8T890_NVRAM_IO_BASE */ pci_write_config8(PCI_DEV(0, 0x0, 2), 0xa2, (K8T890_NVRAM_IO_BASE >> 8)); reg = pci_read_config8(PCI_DEV(0, 0x0, 2), 0xa1); reg |= 0x1; pci_write_config8(PCI_DEV(0, 0x0, 2), 0xa1, reg); #endif /* check if connected non coherent, initcomplete (find the SB on K8 side) */ ldtnr = 0; if (0x7 == pci_read_config8(PCI_DEV(0, 0x18, 0), 0x98)) { ldtnr = 0; } else if (0x7 == pci_read_config8(PCI_DEV(0, 0x18, 0), 0xb8)) { ldtnr = 1; } else if (0x7 == pci_read_config8(PCI_DEV(0, 0x18, 0), 0xd8)) { ldtnr = 2; } #if CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8M800 printk(BIOS_DEBUG, "K8M800 found at LDT "); #elif CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8T800 printk(BIOS_DEBUG, "K8T800 found at LDT "); #elif CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8T800_OLD printk(BIOS_DEBUG, "K8T800_OLD found at LDT "); pci_write_config8(PCI_DEV(0, 0x0, 0), 0x64, 0x00); pci_write_config8(PCI_DEV(0, 0x0, 0), 0xdd, 0x50); #elif CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8T800PRO printk(BIOS_DEBUG, "K8T800 Pro found at LDT "); #elif CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8M890 printk(BIOS_DEBUG, "K8M890 found at LDT "); /* K8M890 fix HT delay */ pci_write_config8(PCI_DEV(0, 0x0, 2), 0xab, 0x22); #elif CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8T890 printk(BIOS_DEBUG, "K8T890 found at LDT "); #endif printk(BIOS_DEBUG, "%02x", ldtnr); /* get the maximum widths for both sides */ cldtwidth_in = pci_read_config8(PCI_DEV(0, 0x18, 0), ldtreg[ldtnr]) & 0x7; cldtwidth_out = (pci_read_config8(PCI_DEV(0, 0x18, 0), ldtreg[ldtnr]) >> 4) & 0x7; vldtwidth_in = pci_read_config8(PCI_DEV(0, 0x0, 0), K8X8XX_HT_CFG_BASE + 0x6) & 0x7; vldtwidth_out = (pci_read_config8(PCI_DEV(0, 0x0, 0), K8X8XX_HT_CFG_BASE + 0x6) >> 4) & 0x7; width = MIN(MIN(MIN(cldtwidth_out, cldtwidth_in), vldtwidth_out), vldtwidth_in); printk(BIOS_DEBUG, " Agreed on width: %02x", width); awidth = pci_read_config8(PCI_DEV(0, 0x0, 0), K8X8XX_HT_CFG_BASE + 0x7); /* Update the desired HT LNK to match AMD NB max from VIA NB is 0x1 */ width = (width == 0x01) ? 0x11 : 0x00; pci_write_config8(PCI_DEV(0, 0x0, 0), K8X8XX_HT_CFG_BASE + 0x7, width); /* Get programmed HT freq at base 0x89 */ cldtfreq = pci_read_config8(PCI_DEV(0, 0x18, 0), ldtreg[ldtnr] + 3) & 0xf; printk(BIOS_DEBUG, " CPU programmed to HT freq: %02x", cldtfreq); vldtcaps = pci_read_config16(PCI_DEV(0, 0, 0), K8X8XX_HT_CFG_BASE + 0xe); printk(BIOS_DEBUG, " VIA HT caps: %04x", vldtcaps); if (!(vldtcaps & (1 << cldtfreq ))) { die("Chipset does not support desired HT frequency\n"); } afreq = pci_read_config8(PCI_DEV(0, 0x0, 0), K8X8XX_HT_CFG_BASE + 0xd); pci_write_config8(PCI_DEV(0, 0x0, 0), K8X8XX_HT_CFG_BASE + 0xd, cldtfreq); printk(BIOS_DEBUG, "\n"); /* no reset needed */ if ((width == awidth) && (afreq == cldtfreq)) { return 0; } return 1; } static inline int s3_save_nvram_early(u32 dword, int size, int nvram_pos) { printk(BIOS_DEBUG, "Writing %x of size %d to nvram pos: %d\n", dword, size, nvram_pos); switch (size) { case 1: outb((dword & 0xff), K8T890_NVRAM_IO_BASE+nvram_pos); nvram_pos +=1; break; case 2: outw((dword & 0xffff), K8T890_NVRAM_IO_BASE+nvram_pos); nvram_pos +=2; break; default: outl(dword, K8T890_NVRAM_IO_BASE+nvram_pos); nvram_pos +=4; break; } return nvram_pos; } static inline int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos) { switch (size) { case 1: *old_dword &= ~0xff; *old_dword |= inb(K8T890_NVRAM_IO_BASE+nvram_pos); nvram_pos +=1; break; case 2: *old_dword &= ~0xffff; *old_dword |= inw(K8T890_NVRAM_IO_BASE+nvram_pos); nvram_pos +=2; break; default: *old_dword = inl(K8T890_NVRAM_IO_BASE+nvram_pos); nvram_pos +=4; break; } printk(BIOS_DEBUG, "Loading %x of size %d to nvram pos:%d\n", * old_dword, size, nvram_pos-size); return nvram_pos; } unsigned long get_top_of_ram(void) { if (acpi_get_sleep_type() != 3) return 0; return (unsigned long) inl(K8T890_NVRAM_IO_BASE+K8T890_NVRAM_TOP_OF_RAM); }