/* * This file is part of the coreboot project. * * Copyright (C) 2007 Rudolf Marek * Copyright (C) 2011 Alexandru Gagniuc * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include "k8x8xx.h" void k8x8xx_vt8237_mirrored_regs_fill(struct k8x8xx_vt8237_mirrored_regs *regs) { msr_t msr; regs->rom_shadow_ctrl_pg_c = 0xff; regs->rom_shadow_ctrl_pg_d = 0xff; regs->rom_shadow_ctrl_pg_e_memhole_smi_decoding = 0xff; regs->rom_shadow_ctrl_pg_f_memhole = 0x30; regs->smm_apic_decoding = 0x19; msr = rdmsr(TOP_MEM); regs->shadow_mem_ctrl = msr.lo >> 24; regs->low_top_address = msr.lo >> 16; } /* We support here K8M890/K8T890 and VT8237R PCI1/Vlink which setup is not in separate * PCI device 0:11.7, but it is mapped to PCI 0:0.7 (0x70-0x7c for PCI1) */ void k8x8xx_vt8237r_cfg(struct device *dev, struct device *devsb) { u8 regm3; struct k8x8xx_vt8237_mirrored_regs mregs; pci_write_config8(dev, 0x70, 0xc2); /* PCI Control */ #if !CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD pci_write_config8(dev, 0x72, 0xee); #endif pci_write_config8(dev, 0x73, 0x01); #if CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD pci_write_config8(dev, 0x74, 0x64); pci_write_config8(dev, 0x75, 0x3f); #else pci_write_config8(dev, 0x74, 0x24); pci_write_config8(dev, 0x75, 0x0f); #endif pci_write_config8(dev, 0x76, 0x50); #if !CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD pci_write_config8(dev, 0x77, 0x08); #endif pci_write_config8(dev, 0x78, 0x01); /* APIC on HT */ pci_write_config8(dev, 0x7c, 0x7f); pci_write_config8(dev, 0x7f, 0x02); k8x8xx_vt8237_mirrored_regs_fill(&mregs); pci_write_config8(dev, 0x57, mregs.shadow_mem_ctrl); /* Shadow mem CTRL */ pci_write_config8(dev, 0x61, mregs.rom_shadow_ctrl_pg_c); /* Shadow page C */ pci_write_config8(dev, 0x62, mregs.rom_shadow_ctrl_pg_d); /* Shadow page D */ pci_write_config8(dev, 0xe6, mregs.smm_apic_decoding); /* SMM and APIC decoding */ regm3 = mregs.rom_shadow_ctrl_pg_e_memhole_smi_decoding; /* Shadow page E */ /* * All access bits for 0xE0000-0xEFFFF encode as just 2 bits! * So the NB reg is quite inconsistent, we expect there only 0xff or 0x00, * and write them to 0x63 7-6 but! VIA 8237A has the mirror at 0x64! */ if (regm3 == 0xff) regm3 = 0xc0; else regm3 = 0x0; /* Shadow page F + memhole copy */ pci_write_config8(dev, 0x63, regm3 | (mregs.rom_shadow_ctrl_pg_f_memhole & 0x3F)); } /** * Setup the V-Link for VT8237R, 8X mode. * * For K8T890CF VIA recommends what is in VIA column, AW is award 8X: * * REG DEF AW VIA-8X VIA-4X * ----------------------------- * NB V-Link Manual Driving Control strobe 0xb5 0x46 0x46 0x88 0x88 * NB V-Link Manual Driving Control - Data 0xb6 0x46 0x46 0x88 0x88 * NB V-Link Receiving Strobe Delay 0xb7 0x02 0x02 0x61 0x01 * NB V-Link Compensation Control bit4,0 (b5,b6) 0xb4 0x10 0x10 0x11 0x11 * SB V-Link Strobe Drive Control 0xb9 0x00 0xa5 0x98 0x98 * SB V-Link Data drive Control???? 0xba 0x00 0xbb 0x77 0x77 * SB V-Link Receive Strobe Delay???? 0xbb 0x04 0x11 0x11 0x11 * SB V-Link Compensation Control bit0 (use b9) 0xb8 0x00 0x01 0x01 0x01 * V-Link CKG Control 0xb0 0x05 0x05 0x06 0x03 * V-Link CKG Control 0xb1 0x05 0x05 0x01 0x03 */ static void vt8237r_vlink_init(struct device *dev) { u8 reg; /* * This init code is valid only for the VT8237R! For different * sounthbridges (e.g. VT8237A, VT8237S, VT8237 (without plus R) * and VT8251) a different init code is required. */ pci_write_config8(dev, 0xb5, 0x88); pci_write_config8(dev, 0xb6, 0x88); pci_write_config8(dev, 0xb7, 0x61); reg = pci_read_config8(dev, 0xb4); reg |= 0x11; pci_write_config8(dev, 0xb4, reg); pci_write_config8(dev, 0xb9, 0x98); pci_write_config8(dev, 0xba, 0x77); pci_write_config8(dev, 0xbb, 0x11); reg = pci_read_config8(dev, 0xb8); reg |= 0x1; pci_write_config8(dev, 0xb8, reg); pci_write_config8(dev, 0xb0, 0x06); pci_write_config8(dev, 0xb1, 0x01); /* Program V-link 8X 16bit full duplex, parity enabled. */ pci_write_config8(dev, 0x48, 0xa3); } static void ctrl_init(struct device *dev) { print_debug("K8x8xx: Initializing V-Link to VT8237R sb: "); /* TODO: Fix some ordering issue fo V-link set Rx77[6] and PCI1_Rx4F[0] should to 1 */ /* C2P Read ACK Return Priority */ /* PCI CFG Address bits[27:24] are used as extended register address bit[11:8] */ #if !CONFIG_SOUTHBRIDGE_VIA_K8T800_OLD pci_write_config8(dev, 0x47, 0x30); #endif /* VT8237R specific configuration other SB are done in their own directories */ device_t devsb = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237R_LPC, 0); if (devsb) { vt8237r_vlink_init(dev); k8x8xx_vt8237r_cfg(dev, devsb); } else { print_debug("VT8237R LPC not found !\n"); return; } print_debug(" Done\n"); print_debug(" VIA_X_7 device dump:\n"); dump_south(dev); } static const struct device_operations ctrl_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = ctrl_init, .ops_pci = 0, }; static const struct pci_driver northbridge_driver_t800 __pci_driver = { .ops = &ctrl_ops, .vendor = PCI_VENDOR_ID_VIA, .device = PCI_DEVICE_ID_VIA_K8T800_NB_SB_CTR, }; static const struct pci_driver northbridge_driver_m800 __pci_driver = { .ops = &ctrl_ops, .vendor = PCI_VENDOR_ID_VIA, .device = PCI_DEVICE_ID_VIA_K8M800_NB_SB_CTR, }; static const struct pci_driver northbridge_driver_t890 __pci_driver = { .ops = &ctrl_ops, .vendor = PCI_VENDOR_ID_VIA, .device = PCI_DEVICE_ID_VIA_K8T890CE_7, }; static const struct pci_driver northbridge_driver_t890cf __pci_driver = { .ops = &ctrl_ops, .vendor = PCI_VENDOR_ID_VIA, .device = PCI_DEVICE_ID_VIA_K8T890CF_7, }; static const struct pci_driver northbridge_driver_m890 __pci_driver = { .ops = &ctrl_ops, .vendor = PCI_VENDOR_ID_VIA, .device = PCI_DEVICE_ID_VIA_K8M890CE_7, };