/* * This file is part of the coreboot project. * * Copyright (C) 2004 Tyan Computer * Written by Yinghai Lu for Tyan Computer. * Copyright (C) 2006,2007 AMD * Written by Yinghai Lu for AMD. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /* TODO: Check whether this actually works (might be copy-paste leftover). */ #include #include #include #if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE #define SIS966_DEVN_BASE CONFIG_HT_CHAIN_END_UNITID_BASE #else #define SIS966_DEVN_BASE CONFIG_HT_CHAIN_UNITID_BASE #endif #define EHCI_BAR 0xFEF00000 /* EHCI BAR address */ #define EHCI_BAR_INDEX 0x10 #define EHCI_DEBUG_OFFSET 0x98 void set_debug_port(unsigned int port) { u32 dword; device_t dev = PCI_DEV(0, SIS966_DEVN_BASE + 2, 1); /* USB EHCI */ /* Write the port number to 0x74[15:12]. */ dword = pci_read_config32(dev, 0x74); dword &= ~(0xf << 12); dword |= (port << 12); pci_write_config32(dev, 0x74, dword); } static void sis966_enable_usbdebug(unsigned int port) { device_t dev = PCI_DEV(0, SIS966_DEVN_BASE + 2, 1); /* USB EHCI */ /* Mark the requested physical USB port (1-15) as the Debug Port. */ set_debug_port(port); /* Set the EHCI BAR address. */ pci_write_config32(dev, EHCI_BAR_INDEX, EHCI_BAR); /* Enable access to the EHCI memory space registers. */ pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY); }