/* * This file is part of the coreboot project. * * Copyright (C) 2004 Tyan Computer * Written by Yinghai Lu for Tyan Computer. * Copyright (C) 2006,2007 AMD * Written by Yinghai Lu for AMD. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include #include #include #include #include "mcp55.h" static int phy_read(u8 *base, unsigned phy_addr, unsigned phy_reg) { u32 dword; unsigned loop = 0x100; write32(base + 0x190, 0x8000); /* Clear MDIO lock bit. */ mdelay(1); dword = read32(base + 0x190); if (dword & (1 << 15)) return -1; write32(base + 0x180, 1); write32(base + 0x190, (phy_addr << 5) | (phy_reg)); do { dword = read32(base + 0x190); if (--loop == 0) return -4; } while ((dword & (1 << 15))); dword = read32(base + 0x180); if (dword & 1) return -3; dword = read32(base + 0x194); return dword; } static void phy_detect(u8 *base) { u32 dword; int i, val; unsigned id; dword = read32(base + 0x188); dword &= ~(1 << 20); write32(base + 0x188, dword); phy_read(base, 0, 1); for (i = 1; i <= 32; i++) { int phyaddr = i & 0x1f; val = phy_read(base, phyaddr, 1); if (val < 0) continue; if ((val & 0xffff) == 0xffff) continue; if ((val & 0xffff) == 0) continue; if (!(val & 1)) break; /* Ethernet PHY */ val = phy_read(base, phyaddr, 3); if (val < 0 || val == 0xffff) continue; id = val & 0xfc00; val = phy_read(base, phyaddr, 2); if (val < 0 || val == 0xffff) continue; id |= ((val & 0xffff) << 16); printk(BIOS_DEBUG, "MCP55 MAC PHY ID 0x%08x PHY ADDR %d\n", id, i); // if ((id == 0xe0180000) || (id == 0x0032cc00)) break; } if (i > 32) printk(BIOS_DEBUG, "MCP55 MAC PHY not found\n"); } static void nic_init(struct device *dev) { u8 *base; u32 mac_h = 0, mac_l = 0; int eeprom_valid = 0; struct southbridge_nvidia_mcp55_config *conf; static u32 nic_index = 0; struct resource *res; res = find_resource(dev, 0x10); if (!res) return; base = res2mmio(res, 0, 0); phy_detect(base); #define NvRegPhyInterface 0xC0 #define PHY_RGMII 0x10000000 write32(base + NvRegPhyInterface, PHY_RGMII); conf = dev->chip_info; if (conf->mac_eeprom_smbus != 0) { // read MAC address from EEPROM at first struct device *dev_eeprom; dev_eeprom = dev_find_slot_on_smbus(conf->mac_eeprom_smbus, conf->mac_eeprom_addr); if (dev_eeprom) { // if that is valid we will use that unsigned char dat[6]; int status; int i; for (i=0;i<6;i++) { status = smbus_read_byte(dev_eeprom, i); if (status < 0) break; dat[i] = status & 0xff; } if (status >= 0) { mac_l = 0; for (i=3;i>=0;i--) { mac_l <<= 8; mac_l += dat[i]; } if (mac_l != 0xffffffff) { mac_l += nic_index; mac_h = 0; for (i=5;i>=4;i--) { mac_h <<= 8; mac_h += dat[i]; } eeprom_valid = 1; } } } } // if that is invalid we will read that from romstrap if (!eeprom_valid) { u32 *mac_pos; mac_pos = (u32 *)0xffffffd0; // refer to romstrap.inc and romstrap.ld mac_l = read32(mac_pos) + nic_index; // overflow? mac_h = read32(mac_pos + 1); } #if 1 // set that into NIC MMIO #define NvRegMacAddrA 0xA8 #define NvRegMacAddrB 0xAC write32(base + NvRegMacAddrA, mac_l); write32(base + NvRegMacAddrB, mac_h); #else // set that into NIC pci_write_config32(dev, 0xa8, mac_l); pci_write_config32(dev, 0xac, mac_h); #endif nic_index++; } static struct device_operations nic_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = nic_init, .scan_bus = 0, // .enable = mcp55_enable, .ops_pci = &mcp55_pci_ops, }; static const struct pci_driver nic_driver __pci_driver = { .ops = &nic_ops, .vendor = PCI_VENDOR_ID_NVIDIA, .device = PCI_DEVICE_ID_NVIDIA_MCP55_NIC, }; static const struct pci_driver nic_bridge_driver __pci_driver = { .ops = &nic_ops, .vendor = PCI_VENDOR_ID_NVIDIA, .device = PCI_DEVICE_ID_NVIDIA_MCP55_NIC_BRIDGE, };