/* * This file is part of the coreboot project. * * Copyright (C) 2008 Advanced Micro Devices, Inc. * Copyright (C) 2008-2010 coresystems GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include <console/console.h> #include <device/device.h> #include <device/azalia_device.h> #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> #include <device/mmio.h> #include <delay.h> #include "mcp55.h" #if CONFIG(MCP55_USE_AZA) #define HDA_ICII_REG 0x68 #define HDA_ICII_BUSY (1 << 0) #define HDA_ICII_VALID (1 << 1) static int set_bits(void *port, u32 mask, u32 val) { u32 reg32; int count; /* Write (val & mask) to port. */ val &= mask; reg32 = read32(port); reg32 &= ~mask; reg32 |= val; write32(port, reg32); /* Wait for readback of register to match what was written to it. */ count = 50; do { /* Wait 1ms based on BKDG wait time. */ mdelay(1); reg32 = read32(port); reg32 &= mask; } while ((reg32 != val) && --count); /* Timeout occurred. */ if (!count) return -1; return 0; } static int codec_detect(u8 *base) { u32 reg32; /* Set bit 0 to 0 to enter reset state (BAR + 0x8)[0]. */ if (set_bits(base + 0x08, 1, 0) == -1) goto no_codec; /* Set bit 0 to 1 to exit reset state (BAR + 0x8)[0]. */ if (set_bits(base + 0x08, 1, 1) == -1) goto no_codec; /* Read in codec location (BAR + 0xe)[2..0]. */ reg32 = read32(base + 0xe); reg32 &= 0x0f; if (!reg32) goto no_codec; return reg32; no_codec: /* Codec not found. */ /* Put HDA back in reset (BAR + 0x8)[0]. */ set_bits(base + 0x08, 1, 0); printk(BIOS_DEBUG, "Azalia: No codec!\n"); return 0; } static u32 find_verb(struct device *dev, u32 viddid, const u32 **verb) { int idx = 0; while (idx < (cim_verb_data_size / sizeof(u32))) { u32 verb_size = 4 * cim_verb_data[idx + 2]; /* in u32 */ if (cim_verb_data[idx] != viddid) { idx += verb_size + 3; /* Skip verb + header. */ continue; } *verb = &cim_verb_data[idx + 3]; return verb_size; } /* Not all codecs need to load another verb. */ return 0; } /** * Wait 50usec for the codec to indicate it is ready. * No response would imply that the codec is non-operative. */ static int wait_for_ready(u8 *base) { /* Use a 50 usec timeout - the Linux kernel uses the same duration. */ int timeout = 50; while (timeout--) { u32 reg32 = read32(base + HDA_ICII_REG); if (!(reg32 & HDA_ICII_BUSY)) return 0; udelay(1); } return -1; } /** * Wait 50usec for the codec to indicate that it accepted the previous command. * No response would imply that the code is non-operative. */ static int wait_for_valid(u8 *base) { u32 reg32; /* Send the verb to the codec. */ reg32 = read32(base + 0x68); reg32 |= (1 << 0) | (1 << 1); write32(base + 0x68, reg32); /* Use a 50 usec timeout - the Linux kernel uses the same duration. */ int timeout = 50; while (timeout--) { reg32 = read32(base + HDA_ICII_REG); if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == HDA_ICII_VALID) return 0; udelay(1); } return -1; } static void codec_init(struct device *dev, u8 *base, int addr) { u32 reg32, verb_size; const u32 *verb; int i; printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr); /* 1 */ if (wait_for_ready(base) == -1) return; reg32 = (addr << 28) | 0x000f0000; write32(base + 0x60, reg32); if (wait_for_valid(base) == -1) return; reg32 = read32(base + 0x64); /* 2 */ printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32); verb_size = find_verb(dev, reg32, &verb); if (!verb_size) { printk(BIOS_DEBUG, "Azalia: No verb!\n"); return; } printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size); /* 3 */ for (i = 0; i < verb_size; i++) { if (wait_for_ready(base) == -1) return; write32(base + 0x60, verb[i]); if (wait_for_valid(base) == -1) return; } printk(BIOS_DEBUG, "Azalia: verb loaded.\n"); } static void codecs_init(struct device *dev, u8 *base, u32 codec_mask) { int i; for (i = 2; i >= 0; i--) { if (codec_mask & (1 << i)) codec_init(dev, base, i); } } #endif static void azalia_init(struct device *dev) { #if CONFIG(MCP55_USE_AZA) u8 *base; u32 codec_mask, reg32; struct resource *res; u8 reg8; /* Set bus master. */ reg32 = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); pci_write_config8(dev, 0x3c, 0x0a); // TODO: Unused? reg8 = pci_read_config8(dev, 0x40); reg8 |= (1 << 3); /* Clear Clock Detect bit. */ pci_write_config8(dev, 0x40, reg8); reg8 &= ~(1 << 3); /* Keep CLKDETCLR from clearing the bit over and over. */ pci_write_config8(dev, 0x40, reg8); reg8 |= (1 << 2); /* Enable clock detection. */ pci_write_config8(dev, 0x40, reg8); mdelay(1); reg8 = pci_read_config8(dev, 0x40); printk(BIOS_DEBUG, "Azalia: codec type: %s\n", (reg8 & (1 << 1)) ? "Azalia" : "AC97"); reg8 = pci_read_config8(dev, 0x40); /* Audio control */ reg8 |= 1; /* Select Azalia mode. TODO: Control via devicetree.cb. */ pci_write_config8(dev, 0x40, reg8); reg8 = pci_read_config8(dev, 0x4d); /* Docking status. */ reg8 &= ~(1 << 7); /* Docking not supported. */ pci_write_config8(dev, 0x4d, reg8); res = find_resource(dev, 0x10); if (!res) return; /* * NOTE: This will break as soon as the Azalia gets a BAR above * 4G. Is there anything we can do about it? */ base = res2mmio(res, 0, 0); printk(BIOS_DEBUG, "Azalia: base = %p\n", base); codec_mask = codec_detect(base); if (codec_mask) { printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask); codecs_init(dev, base, codec_mask); } #endif } static struct pci_operations azalia_pci_ops = { .set_subsystem = pci_dev_set_subsystem, }; static struct device_operations azalia_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = azalia_init, .scan_bus = 0, // .enable = mcp55_enable, .ops_pci = &azalia_pci_ops, }; static const struct pci_driver azalia __pci_driver = { .ops = &azalia_ops, .vendor = PCI_VENDOR_ID_NVIDIA, .device = PCI_DEVICE_ID_NVIDIA_MCP55_AZA, };