/* SPDX-License-Identifier: GPL-2.0-only */ #include <console/console.h> #include <device/device.h> #include <device/pci.h> #include <device/pci_ids.h> #include <option.h> #include <pc80/mc146818rtc.h> #include <pc80/isa-dma.h> #include <pc80/i8259.h> #include <arch/io.h> #include <device/mmio.h> #include <device/pci_ops.h> #include <arch/ioapic.h> #include <acpi/acpi.h> #include <elog.h> #include <acpi/acpigen.h> #include <cpu/x86/smm.h> #include "chip.h" #include "pch.h" #include <southbridge/intel/common/pciehp.h> #include <southbridge/intel/common/acpi_pirq_gen.h> #include <southbridge/intel/common/spi.h> #include <southbridge/intel/common/rcba_pirq.h> #define NMI_OFF 0 /** * Set miscellaneous static southbridge features. * * @param dev PCI device with I/O APIC control registers */ static void pch_enable_ioapic(struct device *dev) { /* affirm full set of redirection table entries ("write once") */ ioapic_lock_max_vectors(VIO_APIC_VADDR); setup_ioapic(VIO_APIC_VADDR, 0x01); } static void pch_enable_serial_irqs(struct device *dev) { /* Set packet length and toggle silent mode bit for one frame. */ pci_write_config8(dev, SERIRQ_CNTL, (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0)); #if !CONFIG(SERIRQ_CONTINUOUS_MODE) pci_write_config8(dev, SERIRQ_CNTL, (1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0)); #endif } /* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control * 0x00 - 0000 = Reserved * 0x01 - 0001 = Reserved * 0x02 - 0010 = Reserved * 0x03 - 0011 = IRQ3 * 0x04 - 0100 = IRQ4 * 0x05 - 0101 = IRQ5 * 0x06 - 0110 = IRQ6 * 0x07 - 0111 = IRQ7 * 0x08 - 1000 = Reserved * 0x09 - 1001 = IRQ9 * 0x0A - 1010 = IRQ10 * 0x0B - 1011 = IRQ11 * 0x0C - 1100 = IRQ12 * 0x0D - 1101 = Reserved * 0x0E - 1110 = IRQ14 * 0x0F - 1111 = IRQ15 * PIRQ[n]_ROUT[7] - PIRQ Routing Control * 0x80 - The PIRQ is not routed. */ static void pch_pirq_init(struct device *dev) { struct device *irq_dev; /* * Interrupt 11 is not used by legacy devices and so can always be used for * PCI interrupts. Full legacy IRQ routing is complicated and hard to * get right. Fortunately all modern OS use MSI and so it's not that big of * an issue anyway. Still we have to provide a reasonable default. Using * interrupt 11 for it everywhere is a working default. ACPI-aware OS can * move it to any interrupt and others will just leave them at default. */ const u8 pirq_routing = 11; pci_write_config8(dev, PIRQA_ROUT, pirq_routing); pci_write_config8(dev, PIRQB_ROUT, pirq_routing); pci_write_config8(dev, PIRQC_ROUT, pirq_routing); pci_write_config8(dev, PIRQD_ROUT, pirq_routing); pci_write_config8(dev, PIRQE_ROUT, pirq_routing); pci_write_config8(dev, PIRQF_ROUT, pirq_routing); pci_write_config8(dev, PIRQG_ROUT, pirq_routing); pci_write_config8(dev, PIRQH_ROUT, pirq_routing); for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { u8 int_pin=0; if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) continue; int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); if (int_pin == 0) continue; pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, pirq_routing); } } static void pch_gpi_routing(struct device *dev) { /* Get the chip configuration */ const struct southbridge_intel_ibexpeak_config *config = dev->chip_info; u32 reg32 = 0; /* An array would be much nicer here, or some * other method of doing this. */ reg32 |= (config->gpi0_routing & 0x03) << 0; reg32 |= (config->gpi1_routing & 0x03) << 2; reg32 |= (config->gpi2_routing & 0x03) << 4; reg32 |= (config->gpi3_routing & 0x03) << 6; reg32 |= (config->gpi4_routing & 0x03) << 8; reg32 |= (config->gpi5_routing & 0x03) << 10; reg32 |= (config->gpi6_routing & 0x03) << 12; reg32 |= (config->gpi7_routing & 0x03) << 14; reg32 |= (config->gpi8_routing & 0x03) << 16; reg32 |= (config->gpi9_routing & 0x03) << 18; reg32 |= (config->gpi10_routing & 0x03) << 20; reg32 |= (config->gpi11_routing & 0x03) << 22; reg32 |= (config->gpi12_routing & 0x03) << 24; reg32 |= (config->gpi13_routing & 0x03) << 26; reg32 |= (config->gpi14_routing & 0x03) << 28; reg32 |= (config->gpi15_routing & 0x03) << 30; pci_write_config32(dev, GPIO_ROUT, reg32); } static void pch_power_options(struct device *dev) { u8 reg8; u16 reg16, pmbase; u32 reg32; const char *state; /* Get the chip configuration */ const struct southbridge_intel_ibexpeak_config *config = dev->chip_info; /* Which state do we want to goto after g3 (power restored)? * 0 == S0 Full On * 1 == S5 Soft Off * * If the option is not existent (Laptops), use Kconfig setting. */ const unsigned int pwr_on = get_uint_option("power_on_after_fail", CONFIG_MAINBOARD_POWER_FAILURE_STATE); reg16 = pci_read_config16(dev, GEN_PMCON_3); reg16 &= 0xfffe; switch (pwr_on) { case MAINBOARD_POWER_OFF: reg16 |= 1; state = "off"; break; case MAINBOARD_POWER_ON: reg16 &= ~1; state = "on"; break; case MAINBOARD_POWER_KEEP: reg16 &= ~1; state = "state keep"; break; default: state = "undefined"; } reg16 &= ~(3 << 4); /* SLP_S4# Assertion Stretch 4s */ reg16 |= (1 << 3); /* SLP_S4# Assertion Stretch Enable */ reg16 &= ~(1 << 10); reg16 |= (1 << 11); /* SLP_S3# Min Assertion Width 50ms */ reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */ pci_write_config16(dev, GEN_PMCON_3, reg16); printk(BIOS_INFO, "Set power %s after power failure.\n", state); /* Set up NMI on errors. */ reg8 = inb(0x61); reg8 &= 0x0f; /* Higher Nibble must be 0 */ reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */ // reg8 &= ~(1 << 2); /* PCI SERR# Enable */ reg8 |= (1 << 2); /* PCI SERR# Disable for now */ outb(reg8, 0x61); reg8 = inb(0x70); const unsigned int nmi_option = get_uint_option("nmi", NMI_OFF); if (nmi_option) { printk(BIOS_INFO, "NMI sources enabled.\n"); reg8 &= ~(1 << 7); /* Set NMI. */ } else { printk(BIOS_INFO, "NMI sources disabled.\n"); reg8 |= (1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ } outb(reg8, 0x70); /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */ reg16 = pci_read_config16(dev, GEN_PMCON_1); reg16 &= ~(3 << 0); // SMI# rate 1 minute reg16 &= ~(1 << 10); // Disable BIOS_PCI_EXP_EN for native PME if (CONFIG(DEBUG_PERIODIC_SMI)) reg16 |= (3 << 0); // Periodic SMI every 8s pci_write_config16(dev, GEN_PMCON_1, reg16); // Set the board's GPI routing. pch_gpi_routing(dev); pmbase = pci_read_config16(dev, 0x40) & 0xfffe; outl(config->gpe0_en, pmbase + GPE0_EN); outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN); /* Set up power management block and determine sleep mode */ reg32 = inl(pmbase + 0x04); // PM1_CNT reg32 &= ~(7 << 10); // SLP_TYP reg32 |= (1 << 0); // SCI_EN outl(reg32, pmbase + 0x04); /* Clear magic status bits to prevent unexpected wake */ reg32 = RCBA32(PRSTS); reg32 |= (1 << 5) | (1 << 4) | (1 << 0); RCBA32(PRSTS) = reg32; /* FIXME: Does this even exist? */ reg32 = RCBA32(0x3f02); reg32 &= ~0xf; RCBA32(0x3f02) = reg32; } static void pch_rtc_init(struct device *dev) { u8 reg8; int rtc_failed; reg8 = pci_read_config8(dev, GEN_PMCON_3); rtc_failed = reg8 & RTC_BATTERY_DEAD; if (rtc_failed) { reg8 &= ~RTC_BATTERY_DEAD; pci_write_config8(dev, GEN_PMCON_3, reg8); elog_add_event(ELOG_TYPE_RTC_RESET); } printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); cmos_init(rtc_failed); } static void mobile5_pm_init(struct device *dev) { int i; printk(BIOS_DEBUG, "Mobile 5 PM init\n"); pci_write_config8(dev, 0xa9, 0x47); RCBA32(0x1d44) = 0x00000000; (void)RCBA32(0x1d44); RCBA32(0x1d48) = 0x00030000; (void)RCBA32(0x1d48); RCBA32(0x1e80) = 0x000c0801; (void)RCBA32(0x1e80); RCBA32(0x1e84) = 0x000200f0; (void)RCBA32(0x1e84); const u32 rcba2010[] = { /* 2010: */ 0x00188200, 0x14000016, 0xbc4abcb5, 0x00000000, /* 2020: */ 0xf0c9605b, 0x13683040, 0x04c8f16e, 0x09e90170 }; for (i = 0; i < ARRAY_SIZE(rcba2010); i++) { RCBA32(0x2010 + 4 * i) = rcba2010[i]; RCBA32(0x2010 + 4 * i); } RCBA32(0x2100) = 0x00000000; (void)RCBA32(0x2100); RCBA32(0x2104) = 0x00000757; (void)RCBA32(0x2104); RCBA32(0x2108) = 0x00170001; (void)RCBA32(0x2108); RCBA32(0x211c) = 0x00000000; (void)RCBA32(0x211c); RCBA32(0x2120) = 0x00010000; (void)RCBA32(0x2120); RCBA32(0x21fc) = 0x00000000; (void)RCBA32(0x21fc); RCBA32(0x2200) = 0x20000044; (void)RCBA32(0x2200); RCBA32(0x2204) = 0x00000001; (void)RCBA32(0x2204); RCBA32(0x2208) = 0x00003457; (void)RCBA32(0x2208); const u32 rcba2210[] = { /* 2210 */ 0x00000000, 0x00000001, 0xa0fff210, 0x0000df00, /* 2220 */ 0x00e30880, 0x00000070, 0x00004000, 0x00000000, /* 2230 */ 0x00e30880, 0x00000070, 0x00004000, 0x00000000, /* 2240 */ 0x00002301, 0x36000000, 0x00010107, 0x00160000, /* 2250 */ 0x00001b01, 0x36000000, 0x00010107, 0x00160000, /* 2260 */ 0x00000601, 0x16000000, 0x00010107, 0x00160000, /* 2270 */ 0x00001c01, 0x16000000, 0x00010107, 0x00160000 }; for (i = 0; i < ARRAY_SIZE(rcba2210); i++) { RCBA32(0x2210 + 4 * i) = rcba2210[i]; RCBA32(0x2210 + 4 * i); } const u32 rcba2300[] = { /* 2300: */ 0x00000000, 0x40000000, 0x4646827b, 0x6e803131, /* 2310: */ 0x32c77887, 0x00077733, 0x00007447, 0x00000040, /* 2320: */ 0xcccc0cfc, 0x0fbb0fff }; for (i = 0; i < ARRAY_SIZE(rcba2300); i++) { RCBA32(0x2300 + 4 * i) = rcba2300[i]; RCBA32(0x2300 + 4 * i); } RCBA32(0x37fc) = 0x00000000; (void)RCBA32(0x37fc); RCBA32(0x3dfc) = 0x00000000; (void)RCBA32(0x3dfc); RCBA32(0x3e7c) = 0xffffffff; (void)RCBA32(0x3e7c); RCBA32(0x3efc) = 0x00000000; (void)RCBA32(0x3efc); RCBA32(0x3f00) = 0x0000010b; (void)RCBA32(0x3f00); } static void enable_hpet(void) { u32 reg32; /* Move HPET to default address 0xfed00000 and enable it */ reg32 = RCBA32(HPTC); reg32 |= (1 << 7); // HPET Address Enable reg32 &= ~(3 << 0); RCBA32(HPTC) = reg32; RCBA32(HPTC); /* Read back for it to work */ write32((u32 *)0xfed00010, read32((u32 *)0xfed00010) | 1); } static void enable_clock_gating(struct device *dev) { u32 reg32; u16 reg16; RCBA32_AND_OR(0x2234, ~0UL, 0xf); reg16 = pci_read_config16(dev, GEN_PMCON_1); reg16 |= (1 << 2) | (1 << 11); pci_write_config16(dev, GEN_PMCON_1, reg16); reg32 = RCBA32(CG); reg32 |= (1 << 31); reg32 |= (1 << 29) | (1 << 28); reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24); reg32 |= (1 << 16); reg32 |= (1 << 17); reg32 |= (1 << 18); reg32 |= (1 << 22); reg32 |= (1 << 23); reg32 &= ~(1 << 20); reg32 |= (1 << 19); reg32 |= (1 << 0); reg32 |= (0xf << 1); RCBA32(CG) = reg32; RCBA32_OR(0x38c0, 0x7); RCBA32_OR(0x36d4, 0x6680c004); RCBA32_OR(0x3564, 0x3); } static void pch_set_acpi_mode(void) { if (!acpi_is_wakeup_s3()) { apm_control(APM_CNT_ACPI_DISABLE); } } static void pch_fixups(struct device *dev) { /* * Enable DMI ASPM in the PCH */ RCBA32_AND_OR(0x2304, ~(1 << 10), 0); RCBA32_OR(0x21a4, (1 << 11)|(1 << 10)); RCBA32_OR(0x21a8, 0x3); } static void lpc_init(struct device *dev) { printk(BIOS_DEBUG, "pch: %s\n", __func__); /* IO APIC initialization. */ pch_enable_ioapic(dev); pch_enable_serial_irqs(dev); /* Setup the PIRQ. */ pch_pirq_init(dev); /* Setup power options. */ pch_power_options(dev); /* Initialize power management */ mobile5_pm_init(dev); /* Initialize the real time clock. */ pch_rtc_init(dev); /* Initialize ISA DMA. */ isa_dma_init(); /* Initialize the High Precision Event Timers, if present. */ enable_hpet(); /* Initialize Clock Gating */ enable_clock_gating(dev); setup_i8259(); /* The OS should do this? */ /* Interrupt 9 should be level triggered (SCI) */ i8259_configure_irq_trigger(9, 1); pch_set_acpi_mode(); pch_fixups(dev); } static void pch_lpc_read_resources(struct device *dev) { struct resource *res; const struct southbridge_intel_ibexpeak_config *config = dev->chip_info; u8 io_index = 0; /* Get the normal PCI resources of this device. */ pci_dev_read_resources(dev); /* Add an extra subtractive resource for both memory and I/O. */ res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = 0; res->size = 0x1000; res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = 0xff800000; res->size = 0x00800000; /* 8 MB for flash */ res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; res = new_resource(dev, 3); /* IOAPIC */ res->base = IO_APIC_ADDR; res->size = 0x00001000; res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; /* Set PCH IO decode ranges if required.*/ if ((config->gen1_dec & 0xFFFC) > 0x1000) { res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = config->gen1_dec & 0xFFFC; res->size = (config->gen1_dec >> 16) & 0xFC; res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } if ((config->gen2_dec & 0xFFFC) > 0x1000) { res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = config->gen2_dec & 0xFFFC; res->size = (config->gen2_dec >> 16) & 0xFC; res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } if ((config->gen3_dec & 0xFFFC) > 0x1000) { res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = config->gen3_dec & 0xFFFC; res->size = (config->gen3_dec >> 16) & 0xFC; res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } if ((config->gen4_dec & 0xFFFC) > 0x1000) { res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = config->gen4_dec & 0xFFFC; res->size = (config->gen4_dec >> 16) & 0xFC; res->flags = IORESOURCE_IO| IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } } static void pch_lpc_enable(struct device *dev) { /* Enable PCH Display Port */ RCBA16(DISPBDF) = 0x0010; RCBA32_OR(FD2, PCH_ENABLE_DBDF); pch_enable(dev); } static const char *lpc_acpi_name(const struct device *dev) { return "LPCB"; } static void southbridge_fill_ssdt(const struct device *device) { struct device *dev = pcidev_on_root(0x1f, 0); struct southbridge_intel_ibexpeak_config *chip = dev->chip_info; intel_acpi_pcie_hotplug_generator(chip->pcie_hotplug_map, 8); intel_acpi_gen_def_acpi_pirq(dev); } static void lpc_final(struct device *dev) { spi_finalize_ops(); /* Call SMM finalize() handlers before resume */ if (CONFIG(INTEL_CHIPSET_LOCKDOWN) || acpi_is_wakeup_s3()) { apm_control(APM_CNT_FINALIZE); } } static struct device_operations device_ops = { .read_resources = pch_lpc_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .acpi_fill_ssdt = southbridge_fill_ssdt, .acpi_name = lpc_acpi_name, .write_acpi_tables = acpi_write_hpet, .init = lpc_init, .final = lpc_final, .enable = pch_lpc_enable, .scan_bus = scan_static_bus, .ops_pci = &pci_dev_ops_pci, }; static const unsigned short pci_device_ids[] = { PCI_DID_INTEL_IBEXPEAK_LPC_P55, PCI_DID_INTEL_IBEXPEAK_LPC_PM55, PCI_DID_INTEL_IBEXPEAK_LPC_H55, PCI_DID_INTEL_IBEXPEAK_LPC_QM57, PCI_DID_INTEL_IBEXPEAK_LPC_H57, PCI_DID_INTEL_IBEXPEAK_LPC_HM55, PCI_DID_INTEL_IBEXPEAK_LPC_Q57, PCI_DID_INTEL_IBEXPEAK_LPC_HM57, PCI_DID_INTEL_IBEXPEAK_LPC_QS57, PCI_DID_INTEL_IBEXPEAK_LPC_3400, PCI_DID_INTEL_IBEXPEAK_LPC_3420, PCI_DID_INTEL_IBEXPEAK_LPC_3450, 0 }; static const struct pci_driver pch_lpc __pci_driver = { .ops = &device_ops, .vendor = PCI_VID_INTEL, .devices = pci_device_ids, };