/* * This file is part of the coreboot project. * * Copyright (C) 2008-2009 coresystems GmbH * 2012 secunet Security Networks AG * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; version 2 of * the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "i82801jx.h" #include "nvs.h" #include #include #include #define NMI_OFF 0 #define ENABLE_ACPI_MODE_IN_COREBOOT 0 typedef struct southbridge_intel_i82801jx_config config_t; static void i82801jx_enable_apic(struct device *dev) { u32 reg32; volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR); volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10); /* Enable IOAPIC. Keep APIC Range Select at zero. */ RCBA8(0x31ff) = 0x03; /* We have to read 0x31ff back if bit0 changed. */ RCBA8(0x31ff); /* Lock maximum redirection entries (MRE), R/WO register. */ *ioapic_index = 0x01; reg32 = *ioapic_data; *ioapic_index = 0x01; *ioapic_data = reg32; setup_ioapic(VIO_APIC_VADDR, 2); /* ICH7 code uses id 2. */ } static void i82801jx_enable_serial_irqs(struct device *dev) { /* Set packet length and toggle silent mode bit for one frame. */ pci_write_config8(dev, D31F0_SERIRQ_CNTL, (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0)); } /* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control * 0x00 - 0000 = Reserved * 0x01 - 0001 = Reserved * 0x02 - 0010 = Reserved * 0x03 - 0011 = IRQ3 * 0x04 - 0100 = IRQ4 * 0x05 - 0101 = IRQ5 * 0x06 - 0110 = IRQ6 * 0x07 - 0111 = IRQ7 * 0x08 - 1000 = Reserved * 0x09 - 1001 = IRQ9 * 0x0A - 1010 = IRQ10 * 0x0B - 1011 = IRQ11 * 0x0C - 1100 = IRQ12 * 0x0D - 1101 = Reserved * 0x0E - 1110 = IRQ14 * 0x0F - 1111 = IRQ15 * PIRQ[n]_ROUT[7] - PIRQ Routing Control * 0x80 - The PIRQ is not routed. */ static void i82801jx_pirq_init(struct device *dev) { struct device *irq_dev; /* Interrupt 11 is not used by legacy devices and so can always be used * for PCI interrupts. Full legacy IRQ routing is complicated and hard * to get right. Fortunately all modern OS use MSI and so it's not that * big of an issue anyway. Still we have to provide a reasonable * default. Using interrupt 11 for it everywhere is a working default. * ACPI-aware OS can move it to any interrupt and others will just leave * them at default. */ const u8 pirq_routing = 11; pci_write_config8(dev, D31F0_PIRQA_ROUT, pirq_routing); pci_write_config8(dev, D31F0_PIRQB_ROUT, pirq_routing); pci_write_config8(dev, D31F0_PIRQC_ROUT, pirq_routing); pci_write_config8(dev, D31F0_PIRQD_ROUT, pirq_routing); pci_write_config8(dev, D31F0_PIRQE_ROUT, pirq_routing); pci_write_config8(dev, D31F0_PIRQF_ROUT, pirq_routing); pci_write_config8(dev, D31F0_PIRQG_ROUT, pirq_routing); pci_write_config8(dev, D31F0_PIRQH_ROUT, pirq_routing); /* Eric Biederman once said we should let the OS do this. * I am not so sure anymore he was right. */ for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { u8 int_pin = 0; if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) continue; int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); if (int_pin == 0) continue; pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, pirq_routing); } } static void i82801jx_gpi_routing(struct device *dev) { /* Get the chip configuration */ config_t *config = dev->chip_info; u32 reg32 = 0; /* An array would be much nicer here, or some * other method of doing this. */ reg32 |= (config->gpi0_routing & 0x03) << 0; reg32 |= (config->gpi1_routing & 0x03) << 2; reg32 |= (config->gpi2_routing & 0x03) << 4; reg32 |= (config->gpi3_routing & 0x03) << 6; reg32 |= (config->gpi4_routing & 0x03) << 8; reg32 |= (config->gpi5_routing & 0x03) << 10; reg32 |= (config->gpi6_routing & 0x03) << 12; reg32 |= (config->gpi7_routing & 0x03) << 14; reg32 |= (config->gpi8_routing & 0x03) << 16; reg32 |= (config->gpi9_routing & 0x03) << 18; reg32 |= (config->gpi10_routing & 0x03) << 20; reg32 |= (config->gpi11_routing & 0x03) << 22; reg32 |= (config->gpi12_routing & 0x03) << 24; reg32 |= (config->gpi13_routing & 0x03) << 26; reg32 |= (config->gpi14_routing & 0x03) << 28; reg32 |= (config->gpi15_routing & 0x03) << 30; pci_write_config32(dev, D31F0_GPIO_ROUT, reg32); } static void i82801jx_power_options(struct device *dev) { u8 reg8; u16 reg16, pmbase; u32 reg32; const char *state; /* Get the chip configuration */ config_t *config = dev->chip_info; int pwr_on = CONFIG_MAINBOARD_POWER_FAILURE_STATE; int nmi_option; /* BIOS must program... */ reg32 = pci_read_config32(dev, 0xac); pci_write_config32(dev, 0xac, reg32 | (1 << 30) | (3 << 8)); /* Which state do we want to goto after g3 (power restored)? * 0 == S0 Full On * 1 == S5 Soft Off * * If the option is not existent (Laptops), use MAINBOARD_POWER_ON. */ pwr_on = MAINBOARD_POWER_ON; get_option(&pwr_on, "power_on_after_fail"); reg8 = pci_read_config8(dev, D31F0_GEN_PMCON_3); reg8 &= 0xfe; switch (pwr_on) { case MAINBOARD_POWER_OFF: reg8 |= 1; state = "off"; break; case MAINBOARD_POWER_ON: reg8 &= ~1; state = "on"; break; case MAINBOARD_POWER_KEEP: reg8 &= ~1; state = "state keep"; break; default: state = "undefined"; } reg8 |= (3 << 4); /* avoid #S4 assertions */ reg8 &= ~(1 << 3); /* minimum asssertion is 1 to 2 RTCCLK */ pci_write_config8(dev, D31F0_GEN_PMCON_3, reg8); printk(BIOS_INFO, "Set power %s after power failure.\n", state); /* Set up NMI on errors. */ reg8 = inb(0x61); reg8 &= 0x0f; /* Higher Nibble must be 0 */ reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */ // reg8 &= ~(1 << 2); /* PCI SERR# Enable */ reg8 |= (1 << 2); /* PCI SERR# Disable for now */ outb(reg8, 0x61); reg8 = inb(0x74); /* Read from 0x74 as 0x70 is write only. */ nmi_option = NMI_OFF; get_option(&nmi_option, "nmi"); if (nmi_option) { printk(BIOS_INFO, "NMI sources enabled.\n"); reg8 &= ~(1 << 7); /* Set NMI. */ } else { printk(BIOS_INFO, "NMI sources disabled.\n"); reg8 |= (1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ } outb(reg8, 0x70); /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */ reg16 = pci_read_config16(dev, D31F0_GEN_PMCON_1); reg16 &= ~(3 << 0); // SMI# rate 1 minute reg16 |= (1 << 2); // CLKRUN_EN - Mobile/Ultra only reg16 |= (1 << 3); // Speedstep Enable - Mobile/Ultra only reg16 |= (1 << 5); // CPUSLP_EN Desktop only if (config->c4onc3_enable) reg16 |= (1 << 7); // another laptop wants this? // reg16 &= ~(1 << 10); // BIOS_PCI_EXP_EN - Desktop/Mobile only reg16 |= (1 << 10); // BIOS_PCI_EXP_EN - Desktop/Mobile only #if DEBUG_PERIODIC_SMIS /* Set DEBUG_PERIODIC_SMIS in i82801jx.h to debug using * periodic SMIs. */ reg16 |= (3 << 0); // Periodic SMI every 8s #endif if (config->c5_enable) reg16 |= (1 << 11); /* Enable C5, C6 and PMSYNC# */ pci_write_config16(dev, D31F0_GEN_PMCON_1, reg16); /* Set exit timings for C5/C6. */ if (config->c5_enable) { reg8 = pci_read_config8(dev, D31F0_C5_EXIT_TIMING); reg8 &= ~((7 << 3) | (7 << 0)); if (config->c6_enable) reg8 |= (5 << 3) | (3 << 0); /* 38-44us PMSYNC# to STPCLK#, 95-102us DPRSTP# to STP_CPU# */ else reg8 |= (0 << 3) | (1 << 0); /* 16-17us PMSYNC# to STPCLK#, 34-40us DPRSTP# to STP_CPU# */ pci_write_config8(dev, D31F0_C5_EXIT_TIMING, reg8); } // Set the board's GPI routing. i82801jx_gpi_routing(dev); pmbase = pci_read_config16(dev, 0x40) & 0xfffe; outl(config->gpe0_en, pmbase + 0x28); outw(config->alt_gp_smi_en, pmbase + 0x38); /* Set up power management block and determine sleep mode */ reg16 = inw(pmbase + 0x00); /* PM1_STS */ outw(reg16, pmbase + 0x00); /* Clear status bits. At least bit11 (power button override) must be cleared or SCI will be constantly fired and OSPM must not know about it (ACPI spec says to ignore the bit). */ reg32 = inl(pmbase + 0x04); // PM1_CNT reg32 &= ~(7 << 10); // SLP_TYP outl(reg32, pmbase + 0x04); /* Set duty cycle for hardware throttling (defaults to 0x0: 50%). */ reg32 = inl(pmbase + 0x10); reg32 &= ~(7 << 5); reg32 |= (config->throttle_duty & 7) << 5; outl(reg32, pmbase + 0x10); } static void i82801jx_configure_cstates(struct device *dev) { u8 reg8; reg8 = pci_read_config8(dev, D31F0_CxSTATE_CNF); reg8 |= (1 << 4) | (1 << 3) | (1 << 2); // Enable Popup & Popdown pci_write_config8(dev, D31F0_CxSTATE_CNF, reg8); // Set Deeper Sleep configuration to recommended values reg8 = pci_read_config8(dev, D31F0_C4TIMING_CNT); reg8 &= 0xf0; reg8 |= (2 << 2); // Deeper Sleep to Stop CPU: 34-40us reg8 |= (2 << 0); // Deeper Sleep to Sleep: 15us pci_write_config8(dev, D31F0_C4TIMING_CNT, reg8); /* We could enable slow-C4 exit here, if someone needs it? */ } static void i82801jx_rtc_init(struct device *dev) { u8 reg8; int rtc_failed; reg8 = pci_read_config8(dev, D31F0_GEN_PMCON_3); rtc_failed = reg8 & RTC_BATTERY_DEAD; if (rtc_failed) { reg8 &= ~RTC_BATTERY_DEAD; pci_write_config8(dev, D31F0_GEN_PMCON_3, reg8); } printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); cmos_init(rtc_failed); } static void enable_hpet(void) { u32 reg32; /* Move HPET to default address 0xfed00000 and enable it */ reg32 = RCBA32(RCBA_HPTC); reg32 |= (1 << 7); // HPET Address Enable reg32 &= ~(3 << 0); RCBA32(RCBA_HPTC) = reg32; } static void enable_clock_gating(void) { u32 reg32; /* Enable DMI dynamic clock gating. */ RCBA32(RCBA_DMIC) |= 3; /* Enable Clock Gating for most devices. */ reg32 = RCBA32(RCBA_CG); reg32 |= (1 << 31); /* LPC dynamic clock gating */ /* USB UHCI dynamic clock gating: */ reg32 |= (1 << 29) | (1 << 28); /* SATA dynamic clock gating [0-3]: */ reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24); reg32 |= (1 << 23); /* LAN static clock gating (if LAN disabled) */ reg32 |= (1 << 22); /* HD audio dynamic clock gating */ reg32 &= ~(1 << 21); /* No HD audio static clock gating */ reg32 &= ~(1 << 20); /* No USB EHCI static clock gating */ reg32 |= (1 << 19); /* USB EHCI dynamic clock gating */ /* More SATA dynamic clock gating [4-5]: */ reg32 |= (1 << 18) | (1 << 17); reg32 |= (1 << 16); /* PCI dynamic clock gating */ /* PCIe, DMI dynamic clock gating: */ reg32 |= (1 << 4) | (1 << 3) | (1 << 2) | (1 << 1); reg32 |= (1 << 0); /* PCIe root port static clock gating */ RCBA32(RCBA_CG) = reg32; /* Enable SPI dynamic clock gating. */ RCBA32(0x38c0) |= 7; } static void i82801jx_set_acpi_mode(struct device *dev) { if (!acpi_is_wakeup_s3()) { #if ENABLE_ACPI_MODE_IN_COREBOOT printk(BIOS_DEBUG, "Enabling ACPI via APMC:\n"); outb(APM_CNT_ACPI_ENABLE, APM_CNT); // Enable ACPI mode printk(BIOS_DEBUG, "done.\n"); #else printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n"); outb(APM_CNT_ACPI_DISABLE, APM_CNT); // Disable ACPI mode printk(BIOS_DEBUG, "done.\n"); #endif } else { printk(BIOS_DEBUG, "S3 wakeup, enabling ACPI via APMC\n"); outb(APM_CNT_ACPI_ENABLE, APM_CNT); } } static void lpc_init(struct device *dev) { printk(BIOS_DEBUG, "i82801jx: lpc_init\n"); /* Set the value for PCI command register. */ pci_write_config16(dev, PCI_COMMAND, 0x000f); /* IO APIC initialization. */ i82801jx_enable_apic(dev); i82801jx_enable_serial_irqs(dev); /* Setup the PIRQ. */ i82801jx_pirq_init(dev); /* Setup power options. */ i82801jx_power_options(dev); /* Configure Cx state registers */ if (LPC_IS_MOBILE(dev)) i82801jx_configure_cstates(dev); /* Initialize the real time clock. */ i82801jx_rtc_init(dev); /* Initialize ISA DMA. */ isa_dma_init(); /* Initialize the High Precision Event Timers, if present. */ enable_hpet(); /* Initialize Clock Gating */ enable_clock_gating(); setup_i8259(); /* The OS should do this? */ /* Interrupt 9 should be level triggered (SCI) */ i8259_configure_irq_trigger(9, 1); if (CONFIG(HAVE_SMI_HANDLER)) i82801jx_set_acpi_mode(dev); } unsigned long acpi_fill_madt(unsigned long current) { /* Local APICs */ current = acpi_create_madt_lapics(current); /* IOAPIC */ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, IO_APIC_ADDR, 0); /* LAPIC_NMI */ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) current, 0, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_EDGE, 0x01); current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) current, 1, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_EDGE, 0x01); /* INT_SRC_OVR */ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current, 0, 0, 2, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_EDGE); current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current, 0, 9, 9, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_LEVEL); return current; } void acpi_fill_fadt(acpi_fadt_t *fadt) { struct device *dev = pcidev_on_root(0x1f, 0); config_t *chip = dev->chip_info; u16 pmbase = pci_read_config16(dev, 0x40) & 0xfffe; fadt->pm1a_evt_blk = pmbase; fadt->pm1b_evt_blk = 0x0; fadt->pm1a_cnt_blk = pmbase + 0x4; fadt->pm1b_cnt_blk = 0x0; fadt->pm2_cnt_blk = pmbase + 0x50; fadt->pm_tmr_blk = pmbase + 0x8; fadt->gpe0_blk = pmbase + 0x20; fadt->gpe1_blk = 0; fadt->pm1_evt_len = 4; fadt->pm1_cnt_len = 2; fadt->pm2_cnt_len = 1; fadt->pm_tmr_len = 4; fadt->gpe0_blk_len = 16; fadt->gpe1_blk_len = 0; fadt->gpe1_base = 0; fadt->reset_reg.space_id = 1; fadt->reset_reg.bit_width = 8; fadt->reset_reg.bit_offset = 0; fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; fadt->reset_reg.addrl = 0xcf9; fadt->reset_reg.addrh = 0; fadt->reset_value = 6; fadt->x_pm1a_evt_blk.space_id = 1; fadt->x_pm1a_evt_blk.bit_width = 32; fadt->x_pm1a_evt_blk.bit_offset = 0; fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; fadt->x_pm1a_evt_blk.addrl = pmbase; fadt->x_pm1a_evt_blk.addrh = 0x0; fadt->x_pm1b_evt_blk.space_id = 0; fadt->x_pm1b_evt_blk.bit_width = 0; fadt->x_pm1b_evt_blk.bit_offset = 0; fadt->x_pm1b_evt_blk.access_size = 0; fadt->x_pm1b_evt_blk.addrl = 0x0; fadt->x_pm1b_evt_blk.addrh = 0x0; fadt->x_pm1a_cnt_blk.space_id = 1; fadt->x_pm1a_cnt_blk.bit_width = 16; fadt->x_pm1a_cnt_blk.bit_offset = 0; fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; fadt->x_pm1a_cnt_blk.addrh = 0x0; fadt->x_pm1b_cnt_blk.space_id = 0; fadt->x_pm1b_cnt_blk.bit_width = 0; fadt->x_pm1b_cnt_blk.bit_offset = 0; fadt->x_pm1b_cnt_blk.access_size = 0; fadt->x_pm1b_cnt_blk.addrl = 0x0; fadt->x_pm1b_cnt_blk.addrh = 0x0; fadt->x_pm2_cnt_blk.space_id = 1; fadt->x_pm2_cnt_blk.bit_width = 8; fadt->x_pm2_cnt_blk.bit_offset = 0; fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; fadt->x_pm2_cnt_blk.addrh = 0x0; fadt->x_pm_tmr_blk.space_id = 1; fadt->x_pm_tmr_blk.bit_width = 32; fadt->x_pm_tmr_blk.bit_offset = 0; fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; fadt->x_pm_tmr_blk.addrh = 0x0; fadt->x_gpe0_blk.space_id = 1; fadt->x_gpe0_blk.bit_width = 128; fadt->x_gpe0_blk.bit_offset = 0; fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; fadt->x_gpe0_blk.addrl = pmbase + 0x20; fadt->x_gpe0_blk.addrh = 0x0; fadt->x_gpe1_blk.space_id = 0; fadt->x_gpe1_blk.bit_width = 0; fadt->x_gpe1_blk.bit_offset = 0; fadt->x_gpe1_blk.access_size = 0; fadt->x_gpe1_blk.addrl = 0x0; fadt->x_gpe1_blk.addrh = 0x0; fadt->day_alrm = 0xd; fadt->mon_alrm = 0x00; fadt->century = 0x32; fadt->reserved = 0; fadt->sci_int = 0x9; fadt->smi_cmd = APM_CNT; fadt->acpi_enable = APM_CNT_ACPI_ENABLE; fadt->acpi_disable = APM_CNT_ACPI_DISABLE; fadt->s4bios_req = 0x0; fadt->pstate_cnt = APM_CNT_PST_CONTROL; fadt->cst_cnt = APM_CNT_CST_CONTROL; fadt->p_lvl2_lat = 1; fadt->p_lvl3_lat = chip->c3_latency; fadt->flush_size = 0; fadt->flush_stride = 0; fadt->duty_offset = 1; if (chip->p_cnt_throttling_supported) fadt->duty_width = 3; else fadt->duty_width = 0; fadt->iapc_boot_arch = 0x03; fadt->flags = (ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK | ACPI_FADT_RESET_REGISTER | ACPI_FADT_C2_MP_SUPPORTED); if (chip->docking_supported) fadt->flags |= ACPI_FADT_DOCKING_SUPPORTED; } static void i82801jx_lpc_read_resources(struct device *dev) { int i, io_index = 0; /* * I/O Resources * * 0x0000 - 0x000f....ISA DMA * 0x0010 - 0x001f....ISA DMA aliases * 0x0020 ~ 0x003d....PIC * 0x002e - 0x002f....Maybe Super I/O * 0x0040 - 0x0043....Timer * 0x004e - 0x004f....Maybe Super I/O * 0x0050 - 0x0053....Timer aliases * 0x0061.............NMI_SC * 0x0070.............NMI_EN (readable in alternative access mode) * 0x0070 - 0x0077....RTC * 0x0080 - 0x008f....ISA DMA * 0x0090 ~ 0x009f....ISA DMA aliases * 0x0092.............Fast A20 and Init * 0x00a0 ~ 0x00bd....PIC * 0x00b2 - 0x00b3....APM * 0x00c0 ~ 0x00de....ISA DMA * 0x00c1 ~ 0x00df....ISA DMA aliases * 0x00f0.............Coprocessor Error * (0x0400-0x041f)....SMBus (SMBUS_IO_BASE, during raminit) * 0x04d0 - 0x04d1....PIC * 0x0500 - 0x057f....PM (DEFAULT_PMBASE) * 0x0580 - 0x05bf....SB GPIO (DEFAULT_GPIOBASE) * 0x05c0 - 0x05ff....SB GPIO cont. (mobile only) * 0x0cf8 - 0x0cff....PCI * 0x0cf9.............Reset Control */ struct resource *res; /* Get the normal PCI resources of this device. */ pci_dev_read_resources(dev); /* Add an extra subtractive resource for both memory and I/O. */ res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = 0; res->size = 0x1000; res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = 0xff000000; res->size = 0x01000000; /* 16 MB for flash */ res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; res = new_resource(dev, 3); /* IOAPIC */ res->base = IO_APIC_ADDR; res->size = 0x00001000; res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; /* Set IO decode ranges if required.*/ for (i = 0; i < 4; i++) { u32 gen_dec; gen_dec = pci_read_config32(dev, 0x84 + 4 * i); if ((gen_dec & 0xFFFC) > 0x1000) { res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = gen_dec & 0xFFFC; res->size = (gen_dec >> 16) & 0xFC; res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } } } static void southbridge_inject_dsdt(struct device *dev) { global_nvs_t *gnvs = cbmem_add (CBMEM_ID_ACPI_GNVS, sizeof(*gnvs)); if (gnvs) { const struct i915_gpu_controller_info *gfx = intel_gma_get_controller_info(); memset(gnvs, 0, sizeof(*gnvs)); acpi_create_gnvs(gnvs); if (gfx) { gnvs->ndid = gfx->ndid; memcpy(gnvs->did, gfx->did, sizeof(gnvs->did)); } /* And tell SMI about it */ smm_setup_structures(gnvs, NULL, NULL); /* Add it to SSDT. */ acpigen_write_scope("\\"); acpigen_write_name_dword("NVSA", (u32) gnvs); acpigen_pop_len(); } } static const char *lpc_acpi_name(const struct device *dev) { return "LPCB"; } static void southbridge_fill_ssdt(struct device *device) { struct device *dev = pcidev_on_root(0x1f, 0); config_t *chip = dev->chip_info; intel_acpi_pcie_hotplug_generator(chip->pcie_hotplug_map, 8); intel_acpi_gen_def_acpi_pirq(device); } static struct pci_operations pci_ops = { .set_subsystem = pci_dev_set_subsystem, }; static struct device_operations device_ops = { .read_resources = i82801jx_lpc_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .acpi_inject_dsdt_generator = southbridge_inject_dsdt, .write_acpi_tables = acpi_write_hpet, .acpi_fill_ssdt_generator = southbridge_fill_ssdt, .acpi_name = lpc_acpi_name, .init = lpc_init, .scan_bus = scan_lpc_bus, .ops_pci = &pci_ops, }; static const unsigned short pci_device_ids[] = { 0x3a10, /* ICH10R Eng. Sample */ 0x3a14, /* ICH10DO */ 0x3a16, /* ICH10R */ 0x3a18, /* ICH10 */ 0x3a1a, /* ICH10D */ 0x3a1e, /* ICH10 Eng. Sample */ 0 }; static const struct pci_driver ich10_lpc __pci_driver = { .ops = &device_ops, .vendor = PCI_VENDOR_ID_INTEL, .devices = pci_device_ids, };