/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include "chip.h" #include "i82801ix.h" static int codec_detect(u8 *base) { u32 reg32; if (azalia_enter_reset(base) < 0) goto no_codec; if (azalia_exit_reset(base) < 0) goto no_codec; /* Read in Codec location (BAR + 0xe)[2..0] */ reg32 = read32(base + HDA_STATESTS_REG); reg32 &= 0x0f; if (!reg32) goto no_codec; return reg32; no_codec: /* Codec not found, put HDA back in reset */ azalia_enter_reset(base); printk(BIOS_DEBUG, "Azalia: No codec!\n"); return 0; } /* * Wait 50usec for the codec to indicate it is ready. * No response would imply that the codec is non-operative. */ static int wait_for_ready(u8 *base) { /* Use a 50 usec timeout - the Linux kernel uses the same duration */ int timeout = 50; while (timeout--) { u32 reg32 = read32(base + HDA_ICII_REG); if (!(reg32 & HDA_ICII_BUSY)) return 0; udelay(1); } return -1; } /* * Wait 50usec for the codec to indicate that it accepted the previous command. * No response would imply that the code is non-operative. */ static int wait_for_valid(u8 *base) { u32 reg32; /* Use a 50 usec timeout - the Linux kernel uses the same duration */ int timeout = 50; /* Send the verb to the codec */ reg32 = read32(base + HDA_ICII_REG); reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID; write32(base + HDA_ICII_REG, reg32); while (timeout--) { reg32 = read32(base + HDA_ICII_REG); if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == HDA_ICII_VALID) return 0; udelay(1); } return -1; } static void codec_init(struct device *dev, u8 *base, int addr) { u32 reg32; const u32 *verb; u32 verb_size; printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr); /* 1 */ if (wait_for_ready(base) < 0) { printk(BIOS_DEBUG, " codec not ready.\n"); return; } reg32 = (addr << 28) | 0x000f0000; write32(base + HDA_IC_REG, reg32); if (wait_for_valid(base) < 0) { printk(BIOS_DEBUG, " codec not valid.\n"); return; } /* 2 */ reg32 = read32(base + HDA_IR_REG); printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32); verb_size = azalia_find_verb(cim_verb_data, cim_verb_data_size, reg32, &verb); if (!verb_size) { printk(BIOS_DEBUG, "Azalia: No verb!\n"); return; } printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size); /* 3 */ azalia_program_verb_table(base, verb, verb_size); printk(BIOS_DEBUG, "Azalia: verb loaded.\n"); } static void codecs_init(struct device *dev, u8 *base, u32 codec_mask) { int i; for (i = 3; i >= 0; i--) { if (codec_mask & (1 << i)) codec_init(dev, base, i); } azalia_program_verb_table(base, pc_beep_verbs, pc_beep_verbs_size); } static void azalia_init(struct device *dev) { u8 *base; struct resource *res; u32 codec_mask; // ESD pci_update_config32(dev, 0x134, ~0x00ff0000, 2 << 16); // Link1 description pci_update_config32(dev, 0x140, ~0x00ff0000, 2 << 16); // Port VC0 Resource Control Register pci_update_config32(dev, 0x114, ~0x000000ff, 1); // VCi traffic class pci_or_config8(dev, 0x44, 7 << 0); // TC7 // VCi Resource Control pci_or_config32(dev, 0x120, (1 << 31) | (1 << 24) | (0x80 << 0)); /* VCi ID and map */ /* Set Bus Master */ pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER); // Docking not supported pci_and_config8(dev, 0x4d, (u8)~(1 << 7)); // Docking Status /* Lock some R/WO bits by writing their current value. */ pci_update_config32(dev, 0x74, ~0, 0); res = probe_resource(dev, PCI_BASE_ADDRESS_0); if (!res) return; // NOTE this will break as soon as the Azalia gets a bar above 4G. // Is there anything we can do about it? base = res2mmio(res, 0, 0); printk(BIOS_DEBUG, "Azalia: base = %p\n", base); codec_mask = codec_detect(base); if (codec_mask) { printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask); codecs_init(dev, base, codec_mask); } } static struct device_operations azalia_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = azalia_init, .ops_pci = &pci_dev_ops_pci, }; /* ICH9DH/ICH9DO/ICH9R/ICH9/ICH9M-E/ICH9M */ static const struct pci_driver i82801ix_azalia __pci_driver = { .ops = &azalia_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_82801IB_HD_AUDIO, };