/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include "i82801gx.h" #include #include #include #include static void usb_ehci_init(struct device *dev) { struct resource *res; u8 *base; u32 reg32; printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_SERR); pci_or_config32(dev, 0xdc, (1 << 31) | (1 << 27)); pci_update_config32(dev, 0xfc, ~(3 << 2), (2 << 2) | (1 << 29) | (1 << 17)); /* Clear any pending port changes */ res = find_resource(dev, PCI_BASE_ADDRESS_0); base = res2mmio(res, 0, 0); reg32 = read32(base + 0x24) | (1 << 2); write32(base + 0x24, reg32); /* workaround */ pci_or_config8(dev, 0x84, 1 << 4); printk(BIOS_DEBUG, "done.\n"); } static void usb_ehci_set_subsystem(struct device *dev, unsigned int vendor, unsigned int device) { u8 access_cntl; access_cntl = pci_read_config8(dev, 0x80); /* Enable writes to protected registers. */ pci_write_config8(dev, 0x80, access_cntl | 1); pci_dev_set_subsystem(dev, vendor, device); /* Restore protection. */ pci_write_config8(dev, 0x80, access_cntl); } static struct pci_operations lops_pci = { .set_subsystem = &usb_ehci_set_subsystem, }; static struct device_operations usb_ehci_ops = { .read_resources = pci_ehci_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = usb_ehci_init, .enable = i82801gx_enable, .ops_pci = &lops_pci, }; /* 82801GB/GR/GDH/GBM/GHM/GU (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH/ICH7-U) */ static const struct pci_driver i82801gx_usb_ehci __pci_driver = { .ops = &usb_ehci_ops, .vendor = PCI_VID_INTEL, .device = 0x27cc, };