/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include "chip.h" #include "i82801dx.h" typedef struct southbridge_intel_i82801dx_config config_t; static void ide_init(struct device *dev) { /* Get the chip configuration */ config_t *config = dev->chip_info; /* Enable IDE devices so the Linux IDE driver will work. */ uint16_t ideTimingConfig; ideTimingConfig = pci_read_config16(dev, IDE_TIM_PRI); ideTimingConfig &= ~IDE_DECODE_ENABLE; if (!config || config->ide0_enable) { /* Enable primary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; printk(BIOS_DEBUG, "IDE0: Primary IDE interface is enabled\n"); } else { printk(BIOS_INFO, "IDE0: Primary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); ideTimingConfig = pci_read_config16(dev, IDE_TIM_SEC); ideTimingConfig &= ~IDE_DECODE_ENABLE; if (!config || config->ide1_enable) { /* Enable secondary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; printk(BIOS_DEBUG, "IDE1: Secondary IDE interface is enabled\n"); } else { printk(BIOS_INFO, "IDE1: Secondary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); } static struct device_operations ide_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = ide_init, .enable = i82801dx_enable, }; /* 82801DB */ static const struct pci_driver i82801db_ide __pci_driver = { .ops = &ide_ops, .vendor = PCI_VID_INTEL, .device = 0x24cb, }; /* 82801DBM */ static const struct pci_driver i82801dbm_ide __pci_driver = { .ops = &ide_ops, .vendor = PCI_VID_INTEL, .device = 0x24ca, };