/* * This file is part of the coreboot project. * * Copyright (C) 2008-2009 coresystems GmbH * Copyright (C) 2013 Sage Electronic Engineering, LLC. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; version 2 of * the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pch.h" #include "nvs.h" #define NMI_OFF 0 #define ENABLE_ACPI_MODE_IN_COREBOOT 0 #define TEST_SMM_FLASH_LOCKDOWN 0 typedef struct southbridge_intel_fsp_bd82x6x_config config_t; static void pch_enable_apic(struct device *dev) { int i; u32 reg32; volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR); volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10); /* Enable ACPI I/O and power management. * Set SCI IRQ to IRQ9 */ pci_write_config8(dev, ACPI_CNTL, 0x80); *ioapic_index = 0; *ioapic_data = (1 << 25); /* affirm full set of redirection table entries ("write once") */ *ioapic_index = 1; reg32 = *ioapic_data; *ioapic_index = 1; *ioapic_data = reg32; *ioapic_index = 0; reg32 = *ioapic_data; printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); if (reg32 != (1 << 25)) die("APIC Error\n"); printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); for (i=0; i<3; i++) { *ioapic_index = i; printk(BIOS_SPEW, " reg 0x%04x:", i); reg32 = *ioapic_data; printk(BIOS_SPEW, " 0x%08x\n", reg32); } *ioapic_index = 3; /* Select Boot Configuration register. */ *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ } static void pch_enable_serial_irqs(struct device *dev) { /* Set packet length and toggle silent mode bit for one frame. */ pci_write_config8(dev, SERIRQ_CNTL, (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0)); #if !CONFIG_SERIRQ_CONTINUOUS_MODE pci_write_config8(dev, SERIRQ_CNTL, (1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0)); #endif } /* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control * 0x00 - 0000 = Reserved * 0x01 - 0001 = Reserved * 0x02 - 0010 = Reserved * 0x03 - 0011 = IRQ3 * 0x04 - 0100 = IRQ4 * 0x05 - 0101 = IRQ5 * 0x06 - 0110 = IRQ6 * 0x07 - 0111 = IRQ7 * 0x08 - 1000 = Reserved * 0x09 - 1001 = IRQ9 * 0x0A - 1010 = IRQ10 * 0x0B - 1011 = IRQ11 * 0x0C - 1100 = IRQ12 * 0x0D - 1101 = Reserved * 0x0E - 1110 = IRQ14 * 0x0F - 1111 = IRQ15 * PIRQ[n]_ROUT[7] - PIRQ Routing Control * 0x80 - The PIRQ is not routed. */ static void pch_pirq_init(device_t dev) { device_t irq_dev; /* Get the chip configuration */ config_t *config = dev->chip_info; pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing); pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing); pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing); pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing); pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing); pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing); pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing); pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing); /* Eric Biederman once said we should let the OS do this. * I am not so sure anymore he was right. */ for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { u8 int_pin=0, int_line=0; if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) continue; int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); switch (int_pin) { case 1: /* INTA# */ int_line = config->pirqa_routing; break; case 2: /* INTB# */ int_line = config->pirqb_routing; break; case 3: /* INTC# */ int_line = config->pirqc_routing; break; case 4: /* INTD# */ int_line = config->pirqd_routing; break; } if (!int_line) continue; pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); } } static void pch_gpi_routing(device_t dev) { /* Get the chip configuration */ config_t *config = dev->chip_info; u32 reg32 = 0; /* An array would be much nicer here, or some * other method of doing this. */ reg32 |= (config->gpi0_routing & 0x03) << 0; reg32 |= (config->gpi1_routing & 0x03) << 2; reg32 |= (config->gpi2_routing & 0x03) << 4; reg32 |= (config->gpi3_routing & 0x03) << 6; reg32 |= (config->gpi4_routing & 0x03) << 8; reg32 |= (config->gpi5_routing & 0x03) << 10; reg32 |= (config->gpi6_routing & 0x03) << 12; reg32 |= (config->gpi7_routing & 0x03) << 14; reg32 |= (config->gpi8_routing & 0x03) << 16; reg32 |= (config->gpi9_routing & 0x03) << 18; reg32 |= (config->gpi10_routing & 0x03) << 20; reg32 |= (config->gpi11_routing & 0x03) << 22; reg32 |= (config->gpi12_routing & 0x03) << 24; reg32 |= (config->gpi13_routing & 0x03) << 26; reg32 |= (config->gpi14_routing & 0x03) << 28; reg32 |= (config->gpi15_routing & 0x03) << 30; pci_write_config32(dev, GPIO_ROUT, reg32); } static void pch_power_options(device_t dev) { u8 reg8; u16 reg16, pmbase; u32 reg32; const char *state; /* Get the chip configuration */ config_t *config = dev->chip_info; int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; int nmi_option; /* Which state do we want to goto after g3 (power restored)? * 0 == S0 Full On * 1 == S5 Soft Off * * If the option is not existent (Laptops), use Kconfig setting. */ get_option(&pwr_on, "power_on_after_fail"); reg16 = pci_read_config16(dev, GEN_PMCON_3); reg16 &= 0xfffe; switch (pwr_on) { case MAINBOARD_POWER_OFF: reg16 |= 1; state = "off"; break; case MAINBOARD_POWER_ON: reg16 &= ~1; state = "on"; break; case MAINBOARD_POWER_KEEP: reg16 &= ~1; state = "state keep"; break; default: state = "undefined"; } reg16 &= ~(3 << 4); /* SLP_S4# Assertion Stretch 4s */ reg16 |= (1 << 3); /* SLP_S4# Assertion Stretch Enable */ reg16 &= ~(1 << 10); reg16 |= (1 << 11); /* SLP_S3# Min Assertion Width 50ms */ reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */ pci_write_config16(dev, GEN_PMCON_3, reg16); printk(BIOS_INFO, "Set power %s after power failure.\n", state); /* Set up NMI on errors. */ reg8 = inb(0x61); reg8 &= 0x0f; /* Higher Nibble must be 0 */ reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */ // reg8 &= ~(1 << 2); /* PCI SERR# Enable */ reg8 |= (1 << 2); /* PCI SERR# Disable for now */ outb(reg8, 0x61); reg8 = inb(0x70); nmi_option = NMI_OFF; get_option(&nmi_option, "nmi"); if (nmi_option) { printk(BIOS_INFO, "NMI sources enabled.\n"); reg8 &= ~(1 << 7); /* Set NMI. */ } else { printk(BIOS_INFO, "NMI sources disabled.\n"); reg8 |= ( 1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ } outb(reg8, 0x70); /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */ reg16 = pci_read_config16(dev, GEN_PMCON_1); reg16 &= ~(3 << 0); // SMI# rate 1 minute reg16 &= ~(1 << 10); // Disable BIOS_PCI_EXP_EN for native PME #if DEBUG_PERIODIC_SMIS /* Set DEBUG_PERIODIC_SMIS in pch.h to debug using * periodic SMIs. */ reg16 |= (3 << 0); // Periodic SMI every 8s #endif pci_write_config16(dev, GEN_PMCON_1, reg16); // Set the board's GPI routing. pch_gpi_routing(dev); pmbase = pci_read_config16(dev, 0x40) & 0xfffe; outl(config->gpe0_en, pmbase + GPE0_EN); outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN); /* Set up power management block and determine sleep mode */ reg32 = inl(pmbase + 0x04); // PM1_CNT reg32 &= ~(7 << 10); // SLP_TYP reg32 |= (1 << 0); // SCI_EN outl(reg32, pmbase + 0x04); /* Clear magic status bits to prevent unexpected wake */ reg32 = RCBA32(0x3310); reg32 |= (1 << 4)|(1 << 5)|(1 << 0); RCBA32(0x3310) = reg32; } static void pch_rtc_init(struct device *dev) { u8 reg8; int rtc_failed; reg8 = pci_read_config8(dev, GEN_PMCON_3); rtc_failed = reg8 & RTC_BATTERY_DEAD; if (rtc_failed) { reg8 &= ~RTC_BATTERY_DEAD; pci_write_config8(dev, GEN_PMCON_3, reg8); #if CONFIG_ELOG elog_add_event(ELOG_TYPE_RTC_RESET); #endif } printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); cmos_init(rtc_failed); } /* CougarPoint PCH Power Management init */ static void cpt_pm_init(struct device *dev) { printk(BIOS_DEBUG, "CougarPoint PM init\n"); pci_write_config8(dev, 0xa9, 0x47); RCBA32_AND_OR(0x2238, ~0UL, (1 << 6)|(1 << 0)); RCBA32_AND_OR(0x228c, ~0UL, (1 << 0)); RCBA16_AND_OR(0x1100, ~0UL, (1 << 13)|(1 << 14)); RCBA16_AND_OR(0x0900, ~0UL, (1 << 14)); RCBA32(0x2304) = 0xc0388400; RCBA32_AND_OR(0x2314, ~0UL, (1 << 5)|(1 << 18)); RCBA32_AND_OR(0x2320, ~0UL, (1 << 15)|(1 << 1)); RCBA32_AND_OR(0x3314, ~0x1f, 0xf); RCBA32(0x3318) = 0x050f0000; RCBA32(0x3324) = 0x04000000; RCBA32_AND_OR(0x3340, ~0UL, 0xfffff); RCBA32_AND_OR(0x3344, ~0UL, (1 << 1)); RCBA32(0x3360) = 0x0001c000; RCBA32(0x3368) = 0x00061100; RCBA32(0x3378) = 0x7f8fdfff; RCBA32(0x337c) = 0x000003fc; RCBA32(0x3388) = 0x00001000; RCBA32(0x3390) = 0x0001c000; RCBA32(0x33a0) = 0x00000800; RCBA32(0x33b0) = 0x00001000; RCBA32(0x33c0) = 0x00093900; RCBA32(0x33cc) = 0x24653002; RCBA32(0x33d0) = 0x062108fe; RCBA32_AND_OR(0x33d4, 0xf000f000, 0x00670060); RCBA32(0x3a28) = 0x01010000; RCBA32(0x3a2c) = 0x01010404; RCBA32(0x3a80) = 0x01041041; RCBA32_AND_OR(0x3a84, ~0x0000ffff, 0x00001001); RCBA32_AND_OR(0x3a84, ~0UL, (1 << 24)); /* SATA 2/3 disabled */ RCBA32_AND_OR(0x3a88, ~0UL, (1 << 0)); /* SATA 4/5 disabled */ RCBA32(0x3a6c) = 0x00000001; RCBA32_AND_OR(0x2344, 0x00ffff00, 0xff00000c); RCBA32_AND_OR(0x80c, ~(0xff << 20), 0x11 << 20); RCBA32(0x33c8) = 0; RCBA32_AND_OR(0x21b0, ~0UL, 0xf); } /* PantherPoint PCH Power Management init */ static void ppt_pm_init(struct device *dev) { printk(BIOS_DEBUG, "PantherPoint PM init\n"); pci_write_config8(dev, 0xa9, 0x47); RCBA32_AND_OR(0x2238, ~0UL, (1 << 0)); RCBA32_AND_OR(0x228c, ~0UL, (1 << 0)); RCBA16_AND_OR(0x1100, ~0UL, (1 << 13)|(1 << 14)); RCBA16_AND_OR(0x0900, ~0UL, (1 << 14)); RCBA32(0x2304) = 0xc03b8400; RCBA32_AND_OR(0x2314, ~0UL, (1 << 5)|(1 << 18)); RCBA32_AND_OR(0x2320, ~0UL, (1 << 15)|(1 << 1)); RCBA32_AND_OR(0x3314, ~0x1f, 0xf); RCBA32(0x3318) = 0x054f0000; RCBA32(0x3324) = 0x04000000; RCBA32_AND_OR(0x3340, ~0UL, 0xfffff); RCBA32_AND_OR(0x3344, ~0UL, (1 << 1)|(1 << 0)); RCBA32(0x3360) = 0x0001c000; RCBA32(0x3368) = 0x00061100; RCBA32(0x3378) = 0x7f8fdfff; RCBA32(0x337c) = 0x000003fd; RCBA32(0x3388) = 0x00001000; RCBA32(0x3390) = 0x0001c000; RCBA32(0x33a0) = 0x00000800; RCBA32(0x33b0) = 0x00001000; RCBA32(0x33c0) = 0x00093900; RCBA32(0x33cc) = 0x24653002; RCBA32(0x33d0) = 0x067388fe; RCBA32_AND_OR(0x33d4, 0xf000f000, 0x00670060); RCBA32(0x3a28) = 0x01010000; RCBA32(0x3a2c) = 0x01010404; RCBA32(0x3a80) = 0x01040000; RCBA32_AND_OR(0x3a84, ~0x0000ffff, 0x00001001); RCBA32_AND_OR(0x3a84, ~0UL, (1 << 24)); /* SATA 2/3 disabled */ RCBA32_AND_OR(0x3a88, ~0UL, (1 << 0)); /* SATA 4/5 disabled */ RCBA32(0x3a6c) = 0x00000001; RCBA32_AND_OR(0x2344, 0x00ffff00, 0xff00000c); RCBA32_AND_OR(0x80c, ~(0xff << 20), 0x11 << 20); RCBA32_AND_OR(0x33a4, ~0UL, (1 << 0)); RCBA32(0x33c8) = 0; RCBA32_AND_OR(0x21b0, ~0UL, 0xf); } static void enable_hpet(void) { u32 reg32; /* Move HPET to default address 0xfed00000 and enable it */ reg32 = RCBA32(HPTC); reg32 |= (1 << 7); // HPET Address Enable reg32 &= ~(3 << 0); RCBA32(HPTC) = reg32; } #if CONFIG_HAVE_SMI_HANDLER static void pch_lock_smm(struct device *dev) { #if TEST_SMM_FLASH_LOCKDOWN u8 reg8; #endif if (!acpi_is_wakeup_s3()) { #if ENABLE_ACPI_MODE_IN_COREBOOT printk(BIOS_DEBUG, "Enabling ACPI via APMC:\n"); outb(0xe1, 0xb2); // Enable ACPI mode printk(BIOS_DEBUG, "done.\n"); #else printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n"); outb(0x1e, 0xb2); // Disable ACPI mode printk(BIOS_DEBUG, "done.\n"); #endif } /* Don't allow evil boot loaders, kernels, or * userspace applications to deceive us: */ smm_lock(); #if TEST_SMM_FLASH_LOCKDOWN /* Now try this: */ printk(BIOS_DEBUG, "Locking BIOS to RO... "); reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", (reg8&1)?"rw":"ro"); reg8 &= ~(1 << 0); /* clear BIOSWE */ pci_write_config8(dev, 0xdc, reg8); reg8 |= (1 << 1); /* set BLE */ pci_write_config8(dev, 0xdc, reg8); printk(BIOS_DEBUG, "ok.\n"); reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", (reg8&1)?"rw":"ro"); printk(BIOS_DEBUG, "Writing:\n"); *(volatile u8 *)0xfff00000 = 0x00; printk(BIOS_DEBUG, "Testing:\n"); reg8 |= (1 << 0); /* set BIOSWE */ pci_write_config8(dev, 0xdc, reg8); reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", (reg8&1)?"rw":"ro"); printk(BIOS_DEBUG, "Done.\n"); #endif } #endif static void pch_disable_smm_only_flashing(struct device *dev) { u8 reg8; printk(BIOS_SPEW, "Enabling BIOS updates outside of SMM... "); reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ reg8 &= ~(1 << 5); pci_write_config8(dev, 0xdc, reg8); } static void pch_fixups(struct device *dev) { u8 gen_pmcon_2; /* Indicate DRAM init done for MRC S3 to know it can resume */ gen_pmcon_2 = pci_read_config8(dev, GEN_PMCON_2); gen_pmcon_2 |= (1 << 7); pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2); } static void pch_decode_init(struct device *dev) { config_t *config = dev->chip_info; printk(BIOS_DEBUG, "pch_decode_init\n"); pci_write_config32(dev, LPC_GEN1_DEC, config->gen1_dec); pci_write_config32(dev, LPC_GEN2_DEC, config->gen2_dec); pci_write_config32(dev, LPC_GEN3_DEC, config->gen3_dec); pci_write_config32(dev, LPC_GEN4_DEC, config->gen4_dec); } static void lpc_init(struct device *dev) { printk(BIOS_DEBUG, "pch: lpc_init\n"); /* Set the value for PCI command register. */ pci_write_config16(dev, PCI_COMMAND, 0x000f); /* IO APIC initialization. */ pch_enable_apic(dev); pch_enable_serial_irqs(dev); /* Setup the PIRQ. */ pch_pirq_init(dev); /* Setup power options. */ pch_power_options(dev); /* Initialize power management */ switch (pch_silicon_type()) { case PCH_TYPE_CPT: /* CougarPoint */ cpt_pm_init(dev); break; case PCH_TYPE_PPT: /* PantherPoint */ ppt_pm_init(dev); break; default: printk(BIOS_ERR, "Unknown Chipset: 0x%04x\n", dev->device); } /* Set the state of the GPIO lines. */ //gpio_init(dev); /* Initialize the real time clock. */ pch_rtc_init(dev); /* Initialize ISA DMA. */ isa_dma_init(); /* Initialize the High Precision Event Timers, if present. */ enable_hpet(); setup_i8259(); /* The OS should do this? */ /* Interrupt 9 should be level triggered (SCI) */ i8259_configure_irq_trigger(9, 1); pch_disable_smm_only_flashing(dev); #if CONFIG_HAVE_SMI_HANDLER pch_lock_smm(dev); #endif pch_fixups(dev); } static void pch_lpc_read_resources(device_t dev) { struct resource *res; config_t *config = dev->chip_info; u8 io_index = 0; /* Get the normal PCI resources of this device. */ pci_dev_read_resources(dev); /* Add an extra subtractive resource for both memory and I/O. */ res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = 0; res->size = 0x1000; res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = 0xff800000; res->size = 0x00800000; /* 8 MB for flash */ res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; res = new_resource(dev, 3); /* IOAPIC */ res->base = IO_APIC_ADDR; res->size = 0x00001000; res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; /* Set PCH IO decode ranges if required.*/ if ((config->gen1_dec & 0xFFFC) > 0x1000) { res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = config->gen1_dec & 0xFFFC; res->size = (config->gen1_dec >> 16) & 0xFC; res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } if ((config->gen2_dec & 0xFFFC) > 0x1000) { res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = config->gen2_dec & 0xFFFC; res->size = (config->gen2_dec >> 16) & 0xFC; res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } if ((config->gen3_dec & 0xFFFC) > 0x1000) { res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = config->gen3_dec & 0xFFFC; res->size = (config->gen3_dec >> 16) & 0xFC; res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } if ((config->gen4_dec & 0xFFFC) > 0x1000) { res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); res->base = config->gen4_dec & 0xFFFC; res->size = (config->gen4_dec >> 16) & 0xFC; res->flags = IORESOURCE_IO| IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } } static void pch_lpc_enable_resources(device_t dev) { pch_decode_init(dev); return pci_dev_enable_resources(dev); } static void pch_lpc_enable(device_t dev) { pch_enable(dev); } static void set_subsystem(device_t dev, unsigned vendor, unsigned device) { if (!vendor || !device) { pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, pci_read_config32(dev, PCI_VENDOR_ID)); } else { pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, ((device & 0xffff) << 16) | (vendor & 0xffff)); } } static void southbridge_inject_dsdt(void) { global_nvs_t *gnvs = cbmem_add (CBMEM_ID_ACPI_GNVS, sizeof (*gnvs)); void *opregion; /* Calling northbridge code as gnvs contains opregion address. */ opregion = igd_make_opregion(); if (gnvs) { memset(gnvs, 0, sizeof (*gnvs)); acpi_create_gnvs(gnvs); /* IGD OpRegion Base Address */ gnvs->aslb = (u32)opregion; /* And tell SMI about it */ smm_setup_structures(gnvs, NULL, NULL); /* Add it to DSDT. */ acpigen_write_scope("\\"); acpigen_write_name_dword("NVSA", (u32) gnvs); acpigen_pop_len(); } } void acpi_fill_fadt(acpi_fadt_t *fadt) { device_t dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); config_t *chip = dev->chip_info; u16 pmbase = pci_read_config16(dev, 0x40) & 0xfffe; int c2_latency; fadt->model = 1; fadt->sci_int = 0x9; fadt->smi_cmd = APM_CNT; fadt->acpi_enable = APM_CNT_ACPI_ENABLE; fadt->acpi_disable = APM_CNT_ACPI_DISABLE; fadt->s4bios_req = 0x0; fadt->pstate_cnt = 0; fadt->pm1a_evt_blk = pmbase; fadt->pm1b_evt_blk = 0x0; fadt->pm1a_cnt_blk = pmbase + 0x4; fadt->pm1b_cnt_blk = 0x0; fadt->pm2_cnt_blk = pmbase + 0x50; fadt->pm_tmr_blk = pmbase + 0x8; fadt->gpe0_blk = pmbase + 0x20; fadt->gpe1_blk = 0; fadt->pm1_evt_len = 4; fadt->pm1_cnt_len = 2; fadt->pm2_cnt_len = 1; fadt->pm_tmr_len = 4; fadt->gpe0_blk_len = 16; fadt->gpe1_blk_len = 0; fadt->gpe1_base = 0; fadt->cst_cnt = 0; c2_latency = chip->c2_latency; if (!c2_latency) { c2_latency = 101; /* c2 unsupported */ } fadt->p_lvl2_lat = c2_latency; fadt->p_lvl3_lat = 87; fadt->flush_size = 1024; fadt->flush_stride = 16; fadt->duty_offset = 1; if (chip->p_cnt_throttling_supported) { fadt->duty_width = 3; } else { fadt->duty_width = 0; } fadt->day_alrm = 0xd; fadt->mon_alrm = 0x00; fadt->century = 0x00; fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_RESET_REGISTER | ACPI_FADT_SEALED_CASE | ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; if (c2_latency < 100) { fadt->flags |= ACPI_FADT_C2_MP_SUPPORTED; } fadt->reset_reg.space_id = 1; fadt->reset_reg.bit_width = 8; fadt->reset_reg.bit_offset = 0; fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; fadt->reset_reg.addrl = 0xcf9; fadt->reset_reg.addrh = 0; fadt->reset_value = 6; fadt->x_pm1a_evt_blk.space_id = 1; fadt->x_pm1a_evt_blk.bit_width = 32; fadt->x_pm1a_evt_blk.bit_offset = 0; fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; fadt->x_pm1a_evt_blk.addrl = pmbase; fadt->x_pm1a_evt_blk.addrh = 0x0; fadt->x_pm1b_evt_blk.space_id = 1; fadt->x_pm1b_evt_blk.bit_width = 0; fadt->x_pm1b_evt_blk.bit_offset = 0; fadt->x_pm1b_evt_blk.access_size = 0; fadt->x_pm1b_evt_blk.addrl = 0x0; fadt->x_pm1b_evt_blk.addrh = 0x0; fadt->x_pm1a_cnt_blk.space_id = 1; fadt->x_pm1a_cnt_blk.bit_width = 16; fadt->x_pm1a_cnt_blk.bit_offset = 0; fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; fadt->x_pm1a_cnt_blk.addrh = 0x0; fadt->x_pm1b_cnt_blk.space_id = 1; fadt->x_pm1b_cnt_blk.bit_width = 0; fadt->x_pm1b_cnt_blk.bit_offset = 0; fadt->x_pm1b_cnt_blk.access_size = 0; fadt->x_pm1b_cnt_blk.addrl = 0x0; fadt->x_pm1b_cnt_blk.addrh = 0x0; fadt->x_pm2_cnt_blk.space_id = 1; fadt->x_pm2_cnt_blk.bit_width = 8; fadt->x_pm2_cnt_blk.bit_offset = 0; fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; fadt->x_pm2_cnt_blk.addrh = 0x0; fadt->x_pm_tmr_blk.space_id = 1; fadt->x_pm_tmr_blk.bit_width = 32; fadt->x_pm_tmr_blk.bit_offset = 0; fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; fadt->x_pm_tmr_blk.addrh = 0x0; fadt->x_gpe0_blk.space_id = 1; fadt->x_gpe0_blk.bit_width = 128; fadt->x_gpe0_blk.bit_offset = 0; fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; fadt->x_gpe0_blk.addrl = pmbase + 0x20; fadt->x_gpe0_blk.addrh = 0x0; fadt->x_gpe1_blk.space_id = 1; fadt->x_gpe1_blk.bit_width = 0; fadt->x_gpe1_blk.bit_offset = 0; fadt->x_gpe1_blk.access_size = 0; fadt->x_gpe1_blk.addrl = 0x0; fadt->x_gpe1_blk.addrh = 0x0; } static struct pci_operations pci_ops = { .set_subsystem = set_subsystem, }; static struct device_operations device_ops = { .read_resources = pch_lpc_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pch_lpc_enable_resources, .write_acpi_tables = acpi_write_hpet, .acpi_inject_dsdt_generator = southbridge_inject_dsdt, .init = lpc_init, .enable = pch_lpc_enable, .scan_bus = scan_static_bus, .ops_pci = &pci_ops, }; /* IDs for LPC device of Intel 6 Series Chipset, Intel 7 Series Chipset, and * Intel C200 Series Chipset */ static const unsigned short pci_device_ids[] = { 0x1c46, 0x1c47, 0x1c49, 0x1c4a, 0x1c4b, 0x1c4c, 0x1c4d, 0x1c4e, 0x1c4f, 0x1c50, 0x1c52, 0x1c54, 0x1e55, 0x1c56, 0x1e57, 0x1c5c, 0x1e5d, 0x1e5e, 0x1e5f, 0x2310, 0 }; static const struct pci_driver pch_lpc __pci_driver = { .ops = &device_ops, .vendor = PCI_VENDOR_ID_INTEL, .devices = pci_device_ids, };