/* SPDX-License-Identifier: GPL-2.0-only */

#include <device/mmio.h>
#include <device/pci_ops.h>
#include <cf9_reset.h>
#include <ip_checksum.h>
#include <device/pci_def.h>
#include <device/smbus_host.h>
#include <southbridge/intel/common/gpio.h>
#include <southbridge/intel/common/pmbase.h>
#include <southbridge/intel/common/rcba.h>

/* For DMI bar.  */
#include <northbridge/intel/sandybridge/sandybridge.h>

#include "pch.h"
#include "chip.h"

#define SOUTHBRIDGE PCI_DEV(0, 0x1f, 0)
#define PCI_DEVICE_ID_INTEL_UM77 0x1e58

static void wait_iobp(void)
{
	while (RCBA8(IOBPS) & 1)
		; // implement timeout?
}

static u32 read_iobp(u32 address)
{
	u32 ret;

	RCBA32(IOBPIRI) = address;
	RCBA16(IOBPS) = (RCBA16(IOBPS) & 0x1ff) | 0x600;
	wait_iobp();
	ret = RCBA32(IOBPD);
	wait_iobp();
	RCBA8(IOBPS); // call wait_iobp() instead here?
	return ret;
}

static void write_iobp(u32 address, u32 val)
{
	/* this function was probably pch_iobp_update with the andvalue
	 * being 0. So either the IOBP read can be removed or this function
	 * and the pch_iobp_update function in ramstage could be merged */
	read_iobp(address);
	RCBA16(IOBPS) = (RCBA16(IOBPS) & 0x1ff) | 0x600;
	wait_iobp();

	RCBA32(IOBPD) = val;
	wait_iobp();
	RCBA16(IOBPS) = (RCBA16(IOBPS) & 0x1ff) | 0x600;

	RCBA8(IOBPS); // call wait_iobp() instead here?
}

void early_pch_init_native_dmi_pre(void)
{
	/* Link Capabilities Register */
	RCBA32(LCAP) = (RCBA32(LCAP) & ~0x3fc00) |
			 (3 << 10) | // L0s and L1 entry supported
			 (2 << 12) | // L0s 128 ns to less than 256 ns
			 (2 << 15);  // L1 2 us to less than 4 us

	RCBA32(0x2340) = (RCBA32(0x2340) & ~0xff0000) | (0x3a << 16);
	RCBA8(DLCTL2) = (RCBA8(DLCTL2) & ~0xf) | 2;
}

void early_pch_init_native_dmi_post(void)
{
	RCBA32(CIR0);	// !!! = 0x01200654
	RCBA32(CIR0) = 0x01200654;
	RCBA32(CIR0);	// !!! = 0x01200654
	RCBA32(CIR0) = 0x012a0654;
	RCBA32(CIR0);	// !!! = 0x012a0654
	RCBA8(UPDCR);	// !!! = 0x00
	RCBA8(UPDCR) = 0x05;

	/*
	 * Virtual Channel resources must match settings in DMIBAR!
	 *
	 * Some of the following settings are taken from
	 * "Intel Core i5-600, i3-500 Desktop Processor Series and Intel
	 * Pentium Desktop Processor 6000 Series Vol. 2" datasheet and
	 * serialice traces.
	 */

	/* Virtual Channel 0 Resource Control Register.
	 * Enable channel.
	 * Set Virtual Channel Identifier.
	 * Map TC0 and TC3 and TC4 to VC0.
	 */

	RCBA32(V0CTL) = (1 << 31) | (0 << 24) | (0x0c << 1) | 1;

	/* Virtual Channel 1 Resource Control Register.
	 * Enable channel.
	 * Set Virtual Channel Identifier.
	 * Map TC1 and TC5 to VC1.
	 */
	RCBA32(V1CTL) = (1 << 31) | (1 << 24) | (0x11 << 1);
	/* Read back register */
	RCBA32(V1CTL);

	/* Virtual Channel private Resource Control Register.
	 * Enable channel.
	 * Set Virtual Channel Identifier.
	 * Map TC2 and TC6 to VCp.
	 */
	RCBA32(CIR31) = (1 << 31) | (2 << 24) | (0x22 << 1);
	/* Read back register */
	RCBA32(CIR31);

	/* Virtual Channel ME Resource Control Register.
	 * Enable channel.
	 * Set Virtual Channel Identifier.
	 * Map TC7 to VCm.
	 */
	RCBA32(CIR32) = (1 << 31) | (7 << 24) | (0x40 << 1);

	/* Lock Virtual Channel Resource control register. */
	RCBA32(CIR0) |= TCLOCKDN;
	/* Read back register */
	RCBA32(CIR0);

	/* Wait for virtual channels negotiation pending */
	while (RCBA16(V0STS) & VCNEGPND)
		;
	while (RCBA16(V1STS) & VCNEGPND)
		;
	while (RCBA16(0x2036) & VCNEGPND)
		;
	while (RCBA16(0x2046) & VCNEGPND)
		;
}

void early_pch_init_native(void)
{
	const u16 dev_id = pci_read_config16(PCH_LPC_DEV, PCI_DEVICE_ID);
	u8 pcie_ports = (dev_id == PCI_DEVICE_ID_INTEL_UM77) ? 4 : 8;

	pci_write_config8(SOUTHBRIDGE, 0xa6, pci_read_config8(SOUTHBRIDGE, 0xa6) | 2);

	/* Clear this bit early for PCIe device detection */
	for (uint8_t i = 0; i < pcie_ports; i++)
		pci_update_config32(PCH_PCIE_DEV(i), 0x338, ~(1 << 26), 0);

	RCBA32(CIR1) = 0x00109000;
	RCBA32(REC); // !!! = 0x00000000
	RCBA32(REC) = 0x40000000;
	RCBA32(0x100c) = 0x01110000;
	RCBA8(0x2340) = 0x1b;
	RCBA32(CIR6); // !!! = 0x0a080000
	RCBA32(CIR6) = 0x0a280000;
	RCBA32(0x2310); // !!! = 0xc809605b
	RCBA32(0x2310) = 0xa809605b;
	RCBA32(DMC2) = 0x00854c74;
	RCBA8(RPC);  // !!! = 0x00
	RCBA32(0x2310); // !!! = 0xa809605b
	RCBA32(0x2310) = 0xa809605b;
	RCBA32(0x2310); // !!! = 0xa809605b
	RCBA32(0x2310) = 0xa809605b;

	write_iobp(0xea007f62, 0x00590133);
	write_iobp(0xec007f62, 0x00590133);
	write_iobp(0xec007f64, 0x59555588);
	write_iobp(0xea0040b9, 0x0001051c);
	write_iobp(0xeb0040a1, 0x800084ff);
	write_iobp(0xec0040a1, 0x800084ff);
	write_iobp(0xea004001, 0x00008400);
	write_iobp(0xeb004002, 0x40201758);
	write_iobp(0xec004002, 0x40201758);
	write_iobp(0xea004002, 0x00601758);
	write_iobp(0xea0040a1, 0x810084ff);
	write_iobp(0xeb0040b1, 0x0001c598);
	write_iobp(0xec0040b1, 0x0001c598);
	write_iobp(0xeb0040b6, 0x0001c598);
	write_iobp(0xea0000a9, 0x80ff969f);
	write_iobp(0xea0001a9, 0x80ff969f);
	write_iobp(0xeb0040b2, 0x0001c396);
	write_iobp(0xeb0040b3, 0x0001c396);
	write_iobp(0xec0040b2, 0x0001c396);
	write_iobp(0xea0001a9, 0x80ff94ff);
	write_iobp(SATA_IOBP_SP0G3IR, 0x0088037f);
	write_iobp(0xea0000a9, 0x80ff94ff);
	write_iobp(SATA_IOBP_SP1G3IR, 0x0088037f);

	write_iobp(0xea007f05, 0x00010642);
	write_iobp(0xea0040b7, 0x0001c91c);
	write_iobp(0xea0040b8, 0x0001c91c);
	write_iobp(0xeb0040a1, 0x820084ff);
	write_iobp(0xec0040a1, 0x820084ff);
	write_iobp(0xea007f0a, 0xc2480000);

	write_iobp(0xec00404d, 0x1ff177f);
	write_iobp(0xec000084, 0x5a600000);
	write_iobp(0xec000184, 0x5a600000);
	write_iobp(0xec000284, 0x5a600000);
	write_iobp(0xec000384, 0x5a600000);
	write_iobp(0xec000094, 0x000f0501);
	write_iobp(0xec000194, 0x000f0501);
	write_iobp(0xec000294, 0x000f0501);
	write_iobp(0xec000394, 0x000f0501);
	write_iobp(0xec000096, 0x00000001);
	write_iobp(0xec000196, 0x00000001);
	write_iobp(0xec000296, 0x00000001);
	write_iobp(0xec000396, 0x00000001);
	write_iobp(0xec000001, 0x00008c08);
	write_iobp(0xec000101, 0x00008c08);
	write_iobp(0xec000201, 0x00008c08);
	write_iobp(0xec000301, 0x00008c08);
	write_iobp(0xec0040b5, 0x0001c518);
	write_iobp(0xec000087, 0x06077597);
	write_iobp(0xec000187, 0x06077597);
	write_iobp(0xec000287, 0x06077597);
	write_iobp(0xec000387, 0x06077597);
	write_iobp(0xea000050, 0x00bb0157);
	write_iobp(0xea000150, 0x00bb0157);
	write_iobp(0xec007f60, 0x77777d77);
	write_iobp(0xea00008d, 0x01320000);
	write_iobp(0xea00018d, 0x01320000);
	write_iobp(0xec0007b2, 0x04514b5e);
	write_iobp(0xec00078c, 0x40000200);
	write_iobp(0xec000780, 0x02000020);
}

static void pch_enable_bars(void)
{
	pci_write_config32(PCH_LPC_DEV, RCBA, CONFIG_FIXED_RCBA_MMIO_BASE | 1);

	pci_write_config32(PCH_LPC_DEV, PMBASE, DEFAULT_PMBASE | 1);

	pci_write_config8(PCH_LPC_DEV, ACPI_CNTL, ACPI_EN);

	pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);

	/* Enable GPIO functionality. */
	pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10);
}

static void pch_generic_setup(void)
{
	RCBA32(GCS) = RCBA32(GCS) | (1 << 5);	/* No reset */
	write_pmbase16(TCO1_CNT, 1 << 11);	/* halt timer */
}

static void pch_enable_gbe(void)
{
	uint8_t wanted_buc;

	/* Don't do this in the bootblock, it might be RO. So one
	   couldn't change the setting later in an updated romstage. */
	if (ENV_BOOTBLOCK)
		return;

	const struct device *const gbe = pcidev_on_root(0x19, 0);
	if (gbe && gbe->enabled)
		wanted_buc = RCBA8(BUC) & ~PCH_DISABLE_GBE;
	else
		wanted_buc = RCBA8(BUC) | PCH_DISABLE_GBE;

	if (RCBA8(BUC) != wanted_buc) {
		RCBA8(BUC) = wanted_buc;
		/* Be double sure not to reset for naught. */
		if (RCBA8(BUC) != wanted_buc)
			return;
		full_reset();
	}
}

static void pch_enable_lpc_decode(void)
{
	/*
	 * Enable some common LPC IO ranges:
	 * - 0x2e/0x2f, 0x4e/0x4f often SuperIO
	 * - 0x60/0x64, 0x62/0x66 often KBC/EC
	 * - 0x3f0-0x3f5/0x3f7 FDD
	 * - 0x378-0x37f and 0x778-0x77f LPT
	 * - 0x2f8-0x2ff COMB
	 * - 0x3f8-0x3ff COMA
	 */
	pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010);
	pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN
		| KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN | COMB_LPC_EN | COMA_LPC_EN);

	const struct device *dev = pcidev_on_root(0x1f, 0);
	const struct southbridge_intel_bd82x6x_config *config = NULL;

	/* Set up generic decode ranges */
	if (!dev)
		return;
	if (dev->chip_info)
		config = dev->chip_info;
	if (!config)
		return;

	pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, config->gen1_dec);
	pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, config->gen2_dec);
	pci_write_config32(PCH_LPC_DEV, LPC_GEN3_DEC, config->gen3_dec);
	pci_write_config32(PCH_LPC_DEV, LPC_GEN4_DEC, config->gen4_dec);
}

__weak void mainboard_pch_lpc_setup(void)
{
}

void early_pch_init(void)
{
	pch_enable_lpc_decode();

	mainboard_pch_lpc_setup();

	pch_enable_bars();

	pch_generic_setup();

	pch_enable_gbe();

	setup_pch_gpios(&mainboard_gpio_map);

	if (ENV_RAMINIT || (CONFIG(CONSOLE_I2C_SMBUS) && ENV_INITIAL_STAGE))
		enable_smbus();
}