/* SPDX-License-Identifier: GPL-2.0-only */

#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <device/mmio.h>
#include <delay.h>
#include <device/azalia_device.h>

#include "chip.h"
#include "pch.h"

typedef struct southbridge_intel_bd82x6x_config config_t;

static int codec_detect(u8 *base)
{
	u8 reg8;

	if (azalia_exit_reset(base) < 0)
		goto no_codec;

	/* Write back the value once reset bit is set. */
	write16(base + HDA_GCAP_REG, read16(base + HDA_GCAP_REG));

	/* Read in Codec location (BAR + 0xe)[2..0] */
	reg8 = read8(base + HDA_STATESTS_REG);
	reg8 &= 0x0f;
	if (!reg8)
		goto no_codec;

	return reg8;

no_codec:
	/* Codec not found, put HDA back in reset */
	azalia_enter_reset(base);
	printk(BIOS_DEBUG, "Azalia: No codec!\n");
	return 0;
}

/*
 * Wait 50usec for the codec to indicate it is ready.
 * No response would imply that the codec is non-operative.
 */

static int wait_for_ready(u8 *base)
{
	/* Use a 1msec timeout */
	int timeout = 1000;

	while (timeout--) {
		u32 reg32 = read32(base + HDA_ICII_REG);
		if (!(reg32 & HDA_ICII_BUSY))
			return 0;
		udelay(1);
	}

	return -1;
}

/*
 * Wait 50usec for the codec to indicate that it accepted the previous command.
 * No response would imply that the code is non-operative.
 */

static int wait_for_valid(u8 *base)
{
	u32 reg32;
	/* Use a 1msec timeout */
	int timeout = 1000;

	/* Send the verb to the codec */
	reg32 = read32(base + HDA_ICII_REG);
	reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID;
	write32(base + HDA_ICII_REG, reg32);

	while (timeout--) {
		reg32 = read32(base + HDA_ICII_REG);
		if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == HDA_ICII_VALID)
			return 0;
		udelay(1);
	}

	return -1;
}

static void codec_init(struct device *dev, u8 *base, int addr)
{
	u32 reg32;
	const u32 *verb;
	u32 verb_size;
	int i;

	printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr);

	/* 1 */
	if (wait_for_ready(base) < 0) {
		printk(BIOS_DEBUG, "  codec not ready.\n");
		return;
	}

	reg32 = (addr << 28) | 0x000f0000;
	write32(base + HDA_IC_REG, reg32);

	if (wait_for_valid(base) < 0) {
		printk(BIOS_DEBUG, "  codec not valid.\n");
		return;
	}

	/* 2 */
	reg32 = read32(base + HDA_IR_REG);
	printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32);
	verb_size = azalia_find_verb(cim_verb_data, cim_verb_data_size, reg32, &verb);

	if (!verb_size) {
		printk(BIOS_DEBUG, "Azalia: No verb!\n");
		return;
	}
	printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size);

	/* 3 */
	for (i = 0; i < verb_size; i++) {
		if (wait_for_ready(base) < 0)
			return;

		write32(base + HDA_IC_REG, verb[i]);

		if (wait_for_valid(base) < 0)
			return;
	}
	printk(BIOS_DEBUG, "Azalia: verb loaded.\n");
}

static void codecs_init(struct device *dev, u8 *base, u32 codec_mask)
{
	int i;
	for (i = 3; i >= 0; i--) {
		if (codec_mask & (1 << i))
			codec_init(dev, base, i);
	}

	for (i = 0; i < pc_beep_verbs_size; i++) {
		if (wait_for_ready(base) < 0)
			return;

		write32(base + HDA_IC_REG, pc_beep_verbs[i]);

		if (wait_for_valid(base) < 0)
			return;
	}
}

static void azalia_init(struct device *dev)
{
	u8 *base;
	struct resource *res;
	u32 codec_mask;
	u32 reg32;

	res = find_resource(dev, PCI_BASE_ADDRESS_0);
	if (!res)
		return;

	// NOTE this will break as soon as the Azalia get's a bar above 4G.
	// Is there anything we can do about it?
	base = res2mmio(res, 0, 0);
	printk(BIOS_DEBUG, "Azalia: base = %p\n", base);

	if (RCBA32(CIR31) & (1 << 31)) {
		reg32 = pci_read_config32(dev, 0x120);
		reg32 &= 0xf8ffff01;
		reg32 |= (1 << 24); // 2 << 24 for server
		reg32 |= RCBA32(CIR31) & 0xfe;
		pci_write_config32(dev, 0x120, reg32);

		pci_or_config16(dev, 0x78, 1 << 11);
	} else
		printk(BIOS_DEBUG, "Azalia: V1CTL disabled.\n");

	pci_and_config32(dev, 0x114, ~0xfe);

	// Set VCi enable bit
	pci_or_config32(dev, 0x120, 1 << 31);

	// Enable HDMI codec:
	pci_or_config32(dev, 0xc4, 1 << 1);

	pci_or_config8(dev, 0x43, 1 << 6);

	/* Additional programming steps */
	pci_or_config32(dev, 0xc4, 1 << 13);

	pci_or_config32(dev, 0xc4, 1 << 10);

	pci_and_config32(dev, 0xd0, ~(1 << 31));

	if (dev->device == 0x1e20) {
		/* Additional step on Panther Point */
		pci_or_config32(dev, 0xc4, 1 << 17);
	}

	/* Set Bus Master */
	pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER);

	pci_write_config8(dev, 0x3c, 0x0a); // unused?

	/* Codec Initialization Programming Sequence */

	/* Take controller out of reset */
	reg32 = read32(base + HDA_GCTL_REG);
	reg32 |= HDA_GCTL_CRST;
	write32(base + HDA_GCTL_REG, reg32);
	/* Wait 1ms */
	udelay(1000);

	// Select Azalia mode. This needs to be controlled via devicetree.cb
	pci_or_config8(dev, 0x40, 1); // Audio Control

	// Docking not supported
	pci_and_config8(dev, 0x4d, (u8)~(1 << 7)); // Docking Status

	codec_mask = codec_detect(base);

	if (codec_mask) {
		printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask);
		codecs_init(dev, base, codec_mask);
	}

	/* Enable dynamic clock gating */
	pci_update_config8(dev, 0x43, ~0x07, (1 << 2) | (1 << 0));
}

static const char *azalia_acpi_name(const struct device *dev)
{
	return "HDEF";
}

static struct device_operations azalia_ops = {
	.read_resources		= pci_dev_read_resources,
	.set_resources		= pci_dev_set_resources,
	.enable_resources	= pci_dev_enable_resources,
	.init			= azalia_init,
	.ops_pci		= &pci_dev_ops_pci,
	.acpi_name		= azalia_acpi_name,
};

static const unsigned short pci_device_ids[] = { 0x1c20, 0x1e20, 0 };

static const struct pci_driver pch_azalia __pci_driver = {
	.ops	 = &azalia_ops,
	.vendor	 = PCI_VENDOR_ID_INTEL,
	.devices = pci_device_ids,
};