/* * This file is part of the coreboot project. * * Copyright (C) 2010 Advanced Micro Devices, Inc. * Copyright (C) 2015 Timothy Pearson , Raptor Engineering * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc. */ #include #include #include #include #include #include #include #include #include #include "sr5650.h" #include "cmn.h" /* * extern function declaration */ extern void set_pcie_dereset(void); extern void set_pcie_reset(void); /* extension registers */ u32 pci_ext_read_config32(device_t nb_dev, device_t dev, u32 reg) { /*get BAR3 base address for nbcfg0x1c */ u32 addr = pci_read_config32(nb_dev, 0x1c) & ~0xF; printk(BIOS_DEBUG, "addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, dev->path.pci.devfn); addr |= dev->bus->secondary << 20 | /* bus num */ dev->path.pci.devfn << 12 | reg; return *((u32 *) addr); } void pci_ext_write_config32(device_t nb_dev, device_t dev, u32 reg_pos, u32 mask, u32 val) { u32 reg_old, reg; /*get BAR3 base address for nbcfg0x1c */ u32 addr = pci_read_config32(nb_dev, 0x1c) & ~0xF; /*printk(BIOS_DEBUG, "write: addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, dev->path.pci.devfn);*/ addr |= dev->bus->secondary << 20 | /* bus num */ dev->path.pci.devfn << 12 | reg_pos; reg = reg_old = *((u32 *) addr); reg &= ~mask; reg |= val; if (reg != reg_old) { *((u32 *) addr) = reg; } } u32 nbpcie_p_read_index(device_t dev, u32 index) { return nb_read_index((dev), NBPCIE_INDEX, (index)); } void nbpcie_p_write_index(device_t dev, u32 index, u32 data) { nb_write_index((dev), NBPCIE_INDEX, (index), (data)); } u32 nbpcie_ind_read_index(device_t nb_dev, u32 index) { return nb_read_index((nb_dev), NBPCIE_INDEX, (index)); } void nbpcie_ind_write_index(device_t nb_dev, u32 index, u32 data) { nb_write_index((nb_dev), NBPCIE_INDEX, (index), (data)); } /*********************************************************** * To access bar3 we need to program PCI MMIO 7 in K8. * in_out: * 1: enable/enter k8 temp mmio base * 0: disable/restore ***********************************************************/ void ProgK8TempMmioBase(u8 in_out, u32 pcie_base_add, u32 mmio_base_add) { /* K8 Function1 is address map */ device_t k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18, 1)); device_t k8_f0 = dev_find_slot(0, PCI_DEVFN(0x18, 0)); if (in_out) { u32 dword, sblk; /* Get SBLink value (HyperTransport I/O Hub Link ID). */ dword = pci_read_config32(k8_f0, 0x64); sblk = (dword >> 8) & 0x3; /* Fill MMIO limit/base pair. */ pci_write_config32(k8_f1, 0xbc, (((pcie_base_add + 0x10000000 - 1) >> 8) & 0xffffff00) | 0x80 | (sblk << 4)); pci_write_config32(k8_f1, 0xb8, (pcie_base_add >> 8) | 0x3); pci_write_config32(k8_f1, 0xb4, (((mmio_base_add + 0x10000000 - 1) >> 8) & 0xffffff00) | (sblk << 4)); pci_write_config32(k8_f1, 0xb0, (mmio_base_add >> 8) | 0x3); } else { pci_write_config32(k8_f1, 0xb8, 0); pci_write_config32(k8_f1, 0xbc, 0); pci_write_config32(k8_f1, 0xb0, 0); pci_write_config32(k8_f1, 0xb4, 0); } } void PcieReleasePortTraining(device_t nb_dev, device_t dev, u32 port) { switch (port) { case 2: /* GPP1, bit4-5 */ case 3: set_nbmisc_enable_bits(nb_dev, PCIE_LINK_CFG, 1 << (port + 2), 0 << (port + 2)); break; case 4: /* GPP3a, bit20-24 */ case 5: case 6: case 7: set_nbmisc_enable_bits(nb_dev, PCIE_LINK_CFG, 1 << (port + 17), 0 << (port + 17)); break; case 9: /* GPP3a, bit25,26 */ case 10: set_nbmisc_enable_bits(nb_dev, PCIE_LINK_CFG, 1 << (port + 16), 0 << (port + 16)); break; case 11: /* GPP2, bit6-7 */ case 12: set_nbmisc_enable_bits(nb_dev, PCIE_LINK_CFG, 1 << (port - 5), 0 << (port - 5)); break; case 13: /* GPP3b, bit4 of NBMISCIND:0x2A */ set_nbmisc_enable_bits(nb_dev, 0x2A, 1 << 4, 0 << 4); break; } } /******************************************************************************************************** * Output: * 0: no device is present. * 1: device is present and is trained. ********************************************************************************************************/ u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port) { u16 count = 5000; u32 lc_state, reg, current_link_width, lane_mask; u8 current, res = 0; u32 gpp_sb_sel = 0; switch (port) { case 2: case 3: gpp_sb_sel = PCIE_CORE_INDEX_GPP1; break; case 4 ... 7: case 9: case 10: gpp_sb_sel = PCIE_CORE_INDEX_GPP3a; break; case 11: case 12: gpp_sb_sel = PCIE_CORE_INDEX_GPP2; break; case 13: gpp_sb_sel = PCIE_CORE_INDEX_GPP3b; break; } while (count--) { udelay(40200); lc_state = nbpcie_p_read_index(dev, 0xa5); /* lc_state */ printk(BIOS_DEBUG, "PcieLinkTraining port=%x:lc current state=%x\n", port, lc_state); current = lc_state & 0x3f; /* get LC_CURRENT_STATE, bit0-5 */ switch (current) { /* 0x00-0x04 means no device is present */ case 0x06: /* read back current link width [6:4]. */ current_link_width = (nbpcie_p_read_index(dev, 0xA2) >> 4) & 0x7; /* 4 means 7:4 and 15:12 * 3 means 7:2 and 15:10 * 2 means 7:1 and 15:9 * ignoring the reversal case */ lane_mask = (0xFF << (current_link_width - 2) * 2) & 0xFF; reg = nbpcie_ind_read_index(nb_dev, 0x65 | gpp_sb_sel); reg |= lane_mask << 8 | lane_mask; /* NOTE: See the comments in rs780_pcie.c * switching_gppsb_configurations * In CIMx 4.5.0 and RPR, 4c is done before 5 & 6. * But in this way, a x4 device in port B (dev 4) of * Configuration B can only be detected as x1, instead * of x4. When the port B is being trained, the * LC_CURRENT_STATE is 6 and the LC_LINK_WIDTH_RD is 1. * We have to set the PCIEIND:0x65 as 0xE0E0 and reset * the slot. Then the card seems to work in x1 mode. */ reg = 0xE0E0; /*I think that the lane_mask calc above is wrong, and this can't be hardcoded because the configuration changes.*/ nbpcie_ind_write_index(nb_dev, 0x65 | gpp_sb_sel, reg); printk(BIOS_DEBUG, "link_width=%x, lane_mask=%x", current_link_width, lane_mask); set_pcie_reset(); mdelay(1); set_pcie_dereset(); break; case 0x07: /* device is in compliance state (training sequence is done). Move to train the next device */ res = 1; count = 0; break; case 0x10: reg = pci_ext_read_config32(nb_dev, dev, PCIE_VC0_RESOURCE_STATUS); printk(BIOS_DEBUG, "PcieTrainPort reg=0x%x\n", reg); /* check bit1 */ if (reg & VC_NEGOTIATION_PENDING) { /* bit1=1 means the link needs to be re-trained. */ /* set bit8=1, bit0-2=bit4-6 */ u32 tmp; reg = nbpcie_p_read_index(dev, PCIE_LC_LINK_WIDTH); tmp = (reg >> 4) & 0x7; /* get bit4-6 */ reg &= 0xfff8; /* clear bit0-2 */ reg += tmp; /* merge */ reg |= 1 << 8; nbpcie_p_write_index(dev, PCIE_LC_LINK_WIDTH, reg); count++; /* CIM said "keep in loop"? */ } else { res = 1; count = 0; } break; default: /* CIMx Unknown Workaround - There is a device that won't train. Try to reset it. */ /* if there are no device resets and nothing works, CIMx does a cf9 system reset (yikes!) */ set_pcie_reset(); mdelay(1); set_pcie_dereset(); res = 0; count = 0; /* break loop */ break; } } return res; } /* * Set Top Of Memory below and above 4G. */ void sr5650_set_tom(device_t nb_dev) { msr_t sysmem; /* The system top memory in SR56X0. */ sysmem = rdmsr(0xc001001A); printk(BIOS_DEBUG, "Sysmem TOM = %x_%x\n", sysmem.hi, sysmem.lo); pci_write_config32(nb_dev, 0x90, sysmem.lo); sysmem = rdmsr(0xc001001D); printk(BIOS_DEBUG, "Sysmem TOM2 = %x_%x\n", sysmem.hi, sysmem.lo); htiu_write_index(nb_dev, 0x31, sysmem.hi); htiu_write_index(nb_dev, 0x30, sysmem.lo | 1); } u32 get_vid_did(device_t dev) { return pci_read_config32(dev, 0); } void sr5650_nb_pci_table(device_t nb_dev) { /* NBPOR_InitPOR function. */ u8 temp8; u16 temp16; u32 temp32; /* Program NB PCI table. */ temp16 = pci_read_config16(nb_dev, 0x04); printk(BIOS_DEBUG, "NB_PCI_REG04 = %x.\n", temp16); temp32 = pci_read_config32(nb_dev, 0x84); printk(BIOS_DEBUG, "NB_PCI_REG84 = %x.\n", temp32); //Reg4Ch[1]=1 (APIC_ENABLE) force cpu request with address 0xFECx_xxxx to south-bridge //Reg4Ch[6]=1 (BMMsgEn) enable BM_Set message generation pci_write_config8(nb_dev, 0x4c, 0x42); temp8 = pci_read_config8(nb_dev, 0x4e); temp8 |= 0x05; /* BAR1_ENABLE */ pci_write_config8(nb_dev, 0x4e, temp8); temp32 = pci_read_config32(nb_dev, 0x4c); printk(BIOS_DEBUG, "NB_PCI_REG4C = %x.\n", temp32); /* disable GFX debug. */ temp8 = pci_read_config8(nb_dev, 0x8d); temp8 &= ~(1<<1); pci_write_config8(nb_dev, 0x8d, temp8); /* The system top memory in SR56X0. */ sr5650_set_tom(nb_dev); /* Program NB HTIU table. */ //set_htiu_enable_bits(nb_dev, 0x05, 1<<10 | 1<<9, 1<<10|1<<9); set_htiu_enable_bits(nb_dev, 0x06, 1, 0x4203a202); //set_htiu_enable_bits(nb_dev, 0x07, 1<<1 | 1<<2, 0x8001); set_htiu_enable_bits(nb_dev, 0x15, 0, 1<<31 | 1<<30 | 1<<27); set_htiu_enable_bits(nb_dev, 0x1c, 0, 0xfffe0000); set_htiu_enable_bits(nb_dev, 0x0c, 0x3f, 1 | 1<<3); set_htiu_enable_bits(nb_dev, 0x19, 0xfffff+(1<<31), 0x186a0+(1<<31)); set_htiu_enable_bits(nb_dev, 0x16, 0x3f<<10, 0x7<<10); set_htiu_enable_bits(nb_dev, 0x23, 0, 1<<28); } /*********************************************** * 0:00.0 NBCFG : * 0:00.1 CLK : bit 0 of nb_cfg 0x4c : 0 - disable, default * 0:01.0 P2P Internal: * 0:02.0 P2P : bit 2 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 * 0:03.0 P2P : bit 3 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 * 0:04.0 P2P : bit 4 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 * 0:05.0 P2P : bit 5 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 * 0:06.0 P2P : bit 6 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 * 0:07.0 P2P : bit 7 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 * 0:08.0 NB2SB : bit 6 of nbmiscind 0x00 : 0 - disable, default + 32 * 1 * case 0 will be called twice, one is by cpu in hypertransport.c line458, * the other is by sr5650. ***********************************************/ void sr5650_enable(device_t dev) { device_t nb_dev = 0, sb_dev = 0; int dev_ind; struct southbridge_amd_sr5650_config *cfg; printk(BIOS_INFO, "sr5650_enable: dev=%p, VID_DID=0x%x\n", dev, get_vid_did(dev)); nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); if (!nb_dev) { die("sr5650_enable: CAN NOT FIND SR5650 DEVICE, HALT!\n"); /* NOT REACHED */ } cfg = (struct southbridge_amd_sr5650_config *)nb_dev->chip_info; /* sb_dev (dev 8) is a bridge that links to southbridge. */ sb_dev = dev_find_slot(0, PCI_DEVFN(8, 0)); if (!sb_dev) { die("sr5650_enable: CAN NOT FIND SB bridge, HALT!\n"); /* NOT REACHED */ } dev_ind = dev->path.pci.devfn >> 3; switch (dev_ind) { case 0: /* bus0, dev0, fun0; */ printk(BIOS_INFO, "Bus-0, Dev-0, Fun-0.\n"); enable_pcie_bar3(nb_dev); /* PCIEMiscInit */ config_gpp_core(nb_dev, sb_dev); sr5650_gpp_sb_init(nb_dev, sb_dev, 8); sr5650_nb_pci_table(nb_dev); break; case 2: /* bus0, dev2,3 GPP1 */ case 3: printk(BIOS_INFO, "Bus-0, Dev-2,3, Fun-0. enable=%d\n", dev->enabled); set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, (dev->enabled ? 0 : 1) << dev_ind); if (dev->enabled) sr5650_gpp_sb_init(nb_dev, dev, dev_ind); /* Note, dev 2,3 are generic PCIe ports. */ break; case 4: /* bus0, dev4-7, four GPP3a */ case 5: case 6: case 7: enable_pcie_bar3(nb_dev); /* PCIEMiscInit */ printk(BIOS_INFO, "Bus-0, Dev-4,5,6,7, Fun-0. enable=%d\n", dev->enabled); set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, (dev->enabled ? 0 : 1) << dev_ind); if (dev->enabled) sr5650_gpp_sb_init(nb_dev, dev, dev_ind); break; case 8: /* bus0, dev8, SB */ printk(BIOS_INFO, "Bus-0, Dev-8, Fun-0. enable=%d\n", dev->enabled); set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6, (dev->enabled ? 1 : 0) << 6); if (dev->enabled) sr5650_gpp_sb_init(nb_dev, dev, dev_ind); disable_pcie_bar3(nb_dev); break; case 9: /* bus 0, dev 9,10, GPP3a */ case 10: printk(BIOS_INFO, "Bus-0, Dev-9, 10, Fun-0. enable=%d\n", dev->enabled); enable_pcie_bar3(nb_dev); /* PCIEMiscInit */ set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << (7 + dev_ind), (dev->enabled ? 0 : 1) << (7 + dev_ind)); if (dev->enabled) sr5650_gpp_sb_init(nb_dev, dev, dev_ind); /* Don't call disable_pcie_bar3(nb_dev) here, otherwise the screen will crash. */ break; case 11: case 12: /* bus 0, dev 11,12, GPP2 */ printk(BIOS_INFO, "Bus-0, Dev-11,12, Fun-0. enable=%d\n", dev->enabled); set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << (7 + dev_ind), (dev->enabled ? 0 : 1) << (7 + dev_ind)); if (dev->enabled) sr5650_gpp_sb_init(nb_dev, dev, dev_ind); break; case 13: /* bus 0, dev 12, GPP3b */ set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << (7 + dev_ind), (dev->enabled ? 0 : 1) << (7 + dev_ind)); if (dev->enabled) sr5650_gpp_sb_init(nb_dev, dev, dev_ind); break; default: printk(BIOS_DEBUG, "unknown dev: %s\n", dev_path(dev)); } /* Lock HWInit Register after the last device was done */ if (dev_ind == 13) { sr56x0_lock_hwinitreg(); udelay(cfg->pcie_settling_time); } } struct chip_operations southbridge_amd_sr5650_ops = { CHIP_NAME("ATI SR5650") .enable_dev = sr5650_enable, };