/* * This file is part of the coreboot project. * * Copyright (C) 2010 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include "rev.h" #define NBHTIU_INDEX 0x94 /* Note: It is different with RS690, whose HTIU index is 0xA8 */ #define NBMISC_INDEX 0x60 #define NBMC_INDEX 0xE8 static u32 nb_read_index(device_t dev, u32 index_reg, u32 index) { pci_write_config32(dev, index_reg, index); return pci_read_config32(dev, index_reg + 0x4); } static void nb_write_index(device_t dev, u32 index_reg, u32 index, u32 data) { pci_write_config32(dev, index_reg, index /* | 0x80 */ ); pci_write_config32(dev, index_reg + 0x4, data); } static u32 nbmisc_read_index(device_t nb_dev, u32 index) { return nb_read_index((nb_dev), NBMISC_INDEX, (index)); } static void nbmisc_write_index(device_t nb_dev, u32 index, u32 data) { nb_write_index((nb_dev), NBMISC_INDEX, ((index) | 0x80), (data)); } static u32 htiu_read_index(device_t nb_dev, u32 index) { return nb_read_index((nb_dev), NBHTIU_INDEX, (index)); } static void htiu_write_index(device_t nb_dev, u32 index, u32 data) { nb_write_index((nb_dev), NBHTIU_INDEX, ((index) | 0x100), (data)); } static u32 nbmc_read_index(device_t nb_dev, u32 index) { return nb_read_index((nb_dev), NBMC_INDEX, (index)); } static void nbmc_write_index(device_t nb_dev, u32 index, u32 data) { nb_write_index((nb_dev), NBMC_INDEX, ((index) | 1 << 9), (data)); } static void set_htiu_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val) { u32 reg_old, reg; reg = reg_old = htiu_read_index(nb_dev, reg_pos); reg &= ~mask; reg |= val; if (reg != reg_old) { htiu_write_index(nb_dev, reg_pos, reg); } } static void set_nbmisc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val) { u32 reg_old, reg; reg = reg_old = nbmisc_read_index(nb_dev, reg_pos); reg &= ~mask; reg |= val; if (reg != reg_old) { nbmisc_write_index(nb_dev, reg_pos, reg); } } static void set_nbcfg_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val) { u32 reg_old, reg; reg = reg_old = pci_read_config32(nb_dev, reg_pos); reg &= ~mask; reg |= val; if (reg != reg_old) { pci_write_config32(nb_dev, reg_pos, reg); } } /* family 10 only, for reg > 0xFF */ #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 static void set_fam10_ext_cfg_enable_bits(device_t fam10_dev, u32 reg_pos, u32 mask, u32 val) { u32 reg_old, reg; reg = reg_old = Get_NB32(fam10_dev, reg_pos); reg &= ~mask; reg |= val; if (reg != reg_old) { Set_NB32(fam10_dev, reg_pos, reg); } } #else #define set_fam10_ext_cfg_enable_bits(a, b, c, d) do {} while (0) #endif static void set_nbcfg_enable_bits_8(device_t nb_dev, u32 reg_pos, u8 mask, u8 val) { u8 reg_old, reg; reg = reg_old = pci_read_config8(nb_dev, reg_pos); reg &= ~mask; reg |= val; if (reg != reg_old) { pci_write_config8(nb_dev, reg_pos, reg); } } static void set_nbmc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val) { u32 reg_old, reg; reg = reg_old = nbmc_read_index(nb_dev, reg_pos); reg &= ~mask; reg |= val; if (reg != reg_old) { nbmc_write_index(nb_dev, reg_pos, reg); } } static u8 is_famly10(void) { return (cpuid_eax(1) & 0xff00000) != 0; } #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 static u8 l3_cache(void) { return (cpuid_edx(0x80000006) & (0x3FFF << 18)) != 0; } static u8 cpu_core_number(void) { return (cpuid_ecx(0x80000008) & 0xFF) + 1; } #endif static u8 get_nb_rev(device_t nb_dev) { u8 reg; reg = pci_read_config8(nb_dev, 0x89); /* copy from CIM, can't find in doc */ switch(reg & 3) { case 0x01: reg = REV_RS780_A12; break; case 0x02: reg = REV_RS780_A13; break; default: reg = REV_RS780_A11; break; } return reg; } /***************************************** * Init HT link speed/width for rs780 -- k8 link * 1: Check CPU Family, Family10? * 2: Get CPU's HT speed and width * 3: Decide HT mode 1 or 3 by HT Speed. >1GHz: HT3, else HT1 *****************************************/ static const u8 rs780_ibias[] = { /* 1, 3 are reserved. */ [0x0] = 0x4C, /* 200MHz HyperTransport 1 only */ [0x2] = 0x4C, /* 400MHz HyperTransport 1 only */ [0x4] = 0xB6, /* 600MHz HyperTransport 1 only */ [0x5] = 0x4C, /* 800MHz HyperTransport 1 only */ [0x6] = 0x9D, /* 1GHz HyperTransport 1 only */ /* HT3 for Family 10 */ [0x7] = 0xB6, /* 1.2GHz HyperTransport 3 only */ [0x8] = 0x2B, /* 1.4GHz HyperTransport 3 only */ [0x9] = 0x4C, /* 1.6GHz HyperTransport 3 only */ [0xa] = 0x6C, /* 1.8GHz HyperTransport 3 only */ [0xb] = 0x9D, /* 2.0GHz HyperTransport 3 only */ [0xc] = 0xAD, /* 2.2GHz HyperTransport 3 only */ [0xd] = 0xB6, /* 2.4GHz HyperTransport 3 only */ [0xe] = 0xC6, /* 2.6GHz HyperTransport 3 only */ }; static void rs780_htinit(void) { /* * About HT, it has been done in enumerate_ht_chain(). */ device_t cpu_f0, rs780_f0, clk_f1; u32 reg; u8 cpu_ht_freq, ibias; cpu_f0 = PCI_DEV(0, 0x18, 0); /************************ * get cpu's ht freq, in cpu's function 0, offset 0x88 * bit11-8, specifics the maximum operation frequency of the link's transmitter clock. * The link frequency field (Frq) is cleared by cold reset. SW can write a nonzero * value to this reg, and that value takes effect on the next warm reset or * LDTSTOP_L disconnect sequence. * please see the table rs780_ibias about the value and its corresponding frequency. ************************/ reg = pci_read_config32(cpu_f0, 0x88); cpu_ht_freq = (reg & 0xf00) >> 8; printk(BIOS_INFO, "rs780_htinit cpu_ht_freq=%x.\n", cpu_ht_freq); rs780_f0 = PCI_DEV(0, 0, 0); //set_nbcfg_enable_bits(rs780_f0, 0xC8, 0x7<<24 | 0x7<<28, 1<<24 | 1<<28); clk_f1 = PCI_DEV(0, 0, 1); /* We need to make sure the F1 is accessible. */ ibias = rs780_ibias[cpu_ht_freq]; /* If HT freq>1GHz, we assume the CPU is fam10, else it is K8. * Is it appropriate? * Frequency is 1GHz, i.e. cpu_ht_freq is 6, in most cases. * So we check 6 only, it would be faster. */ if ((cpu_ht_freq == 0x6) || (cpu_ht_freq == 0x5) || (cpu_ht_freq == 0x4) || (cpu_ht_freq == 0x2) || (cpu_ht_freq == 0x0)) { printk(BIOS_INFO, "rs780_htinit: HT1 mode\n"); /* HT1 mode, RPR 8.4.2 */ /* set IBIAS code */ set_nbcfg_enable_bits(clk_f1, 0xD8, 0x3FF, ibias); /* Optimizes chipset HT transmitter drive strength */ set_htiu_enable_bits(rs780_f0, 0x2A, 0x3, 0x1); } else if ((cpu_ht_freq > 0x6) && (cpu_ht_freq < 0xf)) { printk(BIOS_INFO, "rs780_htinit: HT3 mode\n"); #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 /* HT3 mode, RPR 8.4.3 */ set_nbcfg_enable_bits(rs780_f0, 0x9c, 0x3 << 16, 0); /* set IBIAS code */ set_nbcfg_enable_bits(clk_f1, 0xD8, 0x3FF, ibias); /* Optimizes chipset HT transmitter drive strength */ set_htiu_enable_bits(rs780_f0, 0x2A, 0x3, 0x1); /* Enables error-retry mode */ set_nbcfg_enable_bits(rs780_f0, 0x44, 0x1, 0x1); /* Enables scrambling and Disables command throttling */ set_nbcfg_enable_bits(rs780_f0, 0xac, (1 << 3) | (1 << 14), (1 << 3) | (1 << 14)); /* Enables transmitter de-emphasis */ set_nbcfg_enable_bits(rs780_f0, 0xa4, 1 << 31, 1 << 31); /* Enables transmitter de-emphasis level */ /* Sets training 0 time */ set_nbcfg_enable_bits(rs780_f0, 0xa0, 0x3F, 0x14); /* Enables strict TM4 detection */ set_htiu_enable_bits(rs780_f0, 0x15, 0x1 << 22, 0x1 << 22); /* Enables proper DLL reset sequence */ set_htiu_enable_bits(rs780_f0, 0x16, 0x1 << 10, 0x1 << 10); /* HyperTransport 3 Processor register settings to be done in northbridge */ /* Enables error-retry mode */ set_fam10_ext_cfg_enable_bits(cpu_f0, 0x130, 1 << 0, 1 << 0); /* Enables scrambling */ set_fam10_ext_cfg_enable_bits(cpu_f0, 0x170, 1 << 3, 1 << 3); /* Enables transmitter de-emphasis * This depends on the PCB design and the trace */ /* TODO: */ /* Disables command throttling */ set_fam10_ext_cfg_enable_bits(cpu_f0, 0x168, 1 << 10, 1 << 10); /* Sets Training 0 Time. See T0Time table for encodings */ set_fam10_ext_cfg_enable_bits(cpu_f0, 0x16C, 0x3F, 0x20); /* TODO: */ #endif /* CONFIG_NORTHBRIDGE_AMD_AMDFAM10 */ } } #if !CONFIG_NORTHBRIDGE_AMD_AMDFAM10 /******************************************************* * Optimize k8 with UMA. * See BKDG_NPT_0F guide for details. * The processor node is addressed by its Node ID on the HT link and can be * accessed with a device number in the PCI configuration space on Bus0. * The Node ID 0 is mapped to Device 24 (0x18), the Node ID 1 is mapped * to Device 25, and so on. * The processor implements configuration registers in PCI configuration * space using the following four headers * Function0: HT technology configuration * Function1: Address map configuration * Function2: DRAM and HT technology Trace mode configuration * Function3: Miscellaneous configuration *******************************************************/ static void k8_optimization(void) { device_t k8_f0, k8_f2, k8_f3; msr_t msr; printk(BIOS_INFO, "k8_optimization()\n"); k8_f0 = PCI_DEV(0, 0x18, 0); k8_f2 = PCI_DEV(0, 0x18, 2); k8_f3 = PCI_DEV(0, 0x18, 3); /* 8.6.6 K8 Buffer Allocation Settings */ pci_write_config32(k8_f0, 0x90, 0x01700169); /* CIM NPT_Optimization */ set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 28, 0 << 28); set_nbcfg_enable_bits(k8_f0, 0x68, 3 << 26, 3 << 26); set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 11, 1 << 11); /* set_nbcfg_enable_bits(k8_f0, 0x84, 1 << 11 | 1 << 13 | 1 << 15, 1 << 11 | 1 << 13 | 1 << 15); */ /* TODO */ pci_write_config32(k8_f3, 0x70, 0x51220111); pci_write_config32(k8_f3, 0x74, 0x50404021); pci_write_config32(k8_f3, 0x78, 0x08002A00); if (pci_read_config32(k8_f3, 0xE8) & 0x3<<12) pci_write_config32(k8_f3, 0x7C, 0x0000211A); /* dual core */ else pci_write_config32(k8_f3, 0x7C, 0x0000212B); /* single core */ set_nbcfg_enable_bits_8(k8_f3, 0xDC, 0xFF, 0x25); set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5); set_nbcfg_enable_bits(k8_f2, 0x94, 0xF << 24, 7 << 24); set_nbcfg_enable_bits(k8_f2, 0x90, 1 << 10, 0 << 10); set_nbcfg_enable_bits(k8_f2, 0xA0, 3 << 2, 3 << 2); set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5); msr = rdmsr(0xC001001F); msr.lo &= ~(1 << 9); msr.hi &= ~(1 << 4); wrmsr(0xC001001F, msr); } #else #define k8_optimization() do{}while(0) #endif /* !CONFIG_NORTHBRIDGE_AMD_AMDFAM10 */ #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 static void fam10_optimization(void) { device_t cpu_f0, cpu_f2, cpu_f3; u32 val; printk(BIOS_INFO, "fam10_optimization()\n"); cpu_f0 = PCI_DEV(0, 0x18, 0); cpu_f2 = PCI_DEV(0, 0x18, 2); cpu_f3 = PCI_DEV(0, 0x18, 3); /* 8.6.4.1 */ /* Table 8-13 */ pci_write_config32(cpu_f0, 0x90, 0x808502D0); /* Table 8-14 */ pci_write_config32(cpu_f0, 0x94, 0x00000000); /* Table 8-15 */ val = pci_read_config32(cpu_f0, 0x68); val |= 1 << 24; pci_write_config32(cpu_f0, 0x68, val); /* Table 8-16 */ val = pci_read_config32(cpu_f0, 0x84); val &= ~(1 << 12); pci_write_config32(cpu_f0, 0x84, val); /* Table 8-17 */ val = pci_read_config32(cpu_f2, 0x90); val &= ~(1 << 10); pci_write_config32(cpu_f2, 0x90, val); /* Table 8-18 */ pci_write_config32(cpu_f3, 0x6C, 0x60018051); /* Table 8-19 */ pci_write_config32(cpu_f3, 0x70, 0x60321151); /* Table 8-20 */ pci_write_config32(cpu_f3, 0x74, 0x00980101); /* Table 8-21 */ pci_write_config32(cpu_f3, 0x78, 0x00200C14); /* Table 8-22 */ pci_write_config32(cpu_f3, 0x7C, 0x00070811); /* TODO: Check if L3 Cache is enabled. */ /* Table 8-23 */ Set_NB32(cpu_f3, 0x140, 0x00D33656); /* Table 8-24 */ Set_NB32(cpu_f3, 0x144, 0x00000036); /* Table 8-25 */ Set_NB32(cpu_f3, 0x148, 0x8000832A); /* Table 8-26 */ Set_NB32(cpu_f3, 0x158, 0); /* L3 Disabled: L3 Enabled: */ /* cores: 2 3 4 2 3 4 */ /* bit8:4 28 26 24 24 20 16 */ if (!l3_cache()) { Set_NB32(cpu_f3, 0x1A0, 4 << 12 | (24 + 2*(4-cpu_core_number())) << 4 | 2); } else { Set_NB32(cpu_f3, 0x1A0, 4 << 12 | (16 + 4*(4-cpu_core_number())) << 4 | 4); } } #else #define fam10_optimization() do{}while(0) #endif /* CONFIG_NORTHBRIDGE_AMD_AMDFAM10 */ /***************************************** * rs780_por_pcicfg_init() *****************************************/ static void rs780_por_pcicfg_init(device_t nb_dev) { /* enable PCI Memory Access */ set_nbcfg_enable_bits_8(nb_dev, 0x04, (u8)(~0xFD), 0x02); /* Set RCRB Enable */ set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x1); /* allow decode of 640k-1MB */ set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xEF), 0x10); /* Enable PM2_CNTL(BAR2) IO mapped cfg write access to be broadcast to both NB and SB */ set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x4); /* Power Management Register Enable */ set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x80); /* Reg4Ch[1]=1 (APIC_ENABLE) force cpu request with address 0xFECx_xxxx to south-bridge * Reg4Ch[6]=1 (BMMsgEn) enable BM_Set message generation * BMMsgEn */ set_nbcfg_enable_bits_8(nb_dev, 0x4C, (u8)(~0x00), 0x42 | 1); /* Reg4Ch[16]=1 (WakeC2En) enable Wake_from_C2 message generation. * Reg4Ch[18]=1 (P4IntEnable) Enable north-bridge to accept MSI with address 0xFEEx_xxxx from south-bridge */ set_nbcfg_enable_bits_8(nb_dev, 0x4E, (u8)(~0xFF), 0x05); /* Reg94h[4:0] = 0x0 P drive strength offset 0 * Reg94h[6:5] = 0x2 P drive strength additive adjust */ set_nbcfg_enable_bits_8(nb_dev, 0x94, (u8)(~0x80), 0x40); /* Reg94h[20:16] = 0x0 N drive strength offset 0 * Reg94h[22:21] = 0x2 N drive strength additive adjust */ set_nbcfg_enable_bits_8(nb_dev, 0x96, (u8)(~0x80), 0x40); /* Reg80h[4:0] = 0x0 Termination offset * Reg80h[6:5] = 0x2 Termination additive adjust */ set_nbcfg_enable_bits_8(nb_dev, 0x80, (u8)(~0x80), 0x40); /* Reg80h[14] = 0x1 Enable receiver termination control */ set_nbcfg_enable_bits_8(nb_dev, 0x81, (u8)(~0xFF), 0x40); /* Reg94h[15] = 0x1 Enables HT transmitter advanced features to be turned on * Reg94h[14] = 0x1 Enable drive strength control */ set_nbcfg_enable_bits_8(nb_dev, 0x95, (u8)(~0x3F), 0xC4); /* Reg94h[31:29] = 0x7 Enables HT transmitter de-emphasis */ set_nbcfg_enable_bits_8(nb_dev, 0x97, (u8)(~0x1F), 0xE0); /* Reg8Ch[9] enables Gfx Debug BAR programming * Reg8Ch[10] enables Gfx Debug BAR operation * Enable programming of the debug bar now, but enable * operation only after it has been programmed */ set_nbcfg_enable_bits_8(nb_dev, 0x8D, (u8)(~0xFF), 0x02); } static void rs780_por_mc_index_init(device_t nb_dev) { set_nbmc_enable_bits(nb_dev, 0x7A, ~0xFFFFFF80, 0x0000005F); set_nbmc_enable_bits(nb_dev, 0xD8, ~0x00000000, 0x00600060); set_nbmc_enable_bits(nb_dev, 0xD9, ~0x00000000, 0x00600060); set_nbmc_enable_bits(nb_dev, 0xE0, ~0x00000000, 0x00000000); set_nbmc_enable_bits(nb_dev, 0xE1, ~0x00000000, 0x00000000); set_nbmc_enable_bits(nb_dev, 0xE8, ~0x00000000, 0x003E003E); set_nbmc_enable_bits(nb_dev, 0xE9, ~0x00000000, 0x003E003E); } static void rs780_por_misc_index_init(device_t nb_dev) { /* NB_MISC_IND_WR_EN + IOC_PCIE_CNTL * Block non-snoop DMA request if PMArbDis is set. * Set BMSetDis */ set_nbmisc_enable_bits(nb_dev, 0x0B, ~0xFFFF0000, 0x00000180); set_nbmisc_enable_bits(nb_dev, 0x01, ~0xFFFFFFFF, 0x00000040); /* NBCFG (NBMISCIND 0x0): NB_CNTL - * HIDE_NB_AGP_CAP ([0], default=1)HIDE * HIDE_P2P_AGP_CAP ([1], default=1)HIDE * HIDE_NB_GART_BAR ([2], default=1)HIDE * AGPMODE30 ([4], default=0)DISABLE * AGP30ENCHANCED ([5], default=0)DISABLE * HIDE_AGP_CAP ([8], default=1)ENABLE */ set_nbmisc_enable_bits(nb_dev, 0x00, ~0xFFFF0000, 0x00000506); /* set bit 10 for MSI */ /* NBMISCIND:0x6A[16]= 1 SB link can get a full swing * set_nbmisc_enable_bits(nb_dev, 0x6A, 0ffffffffh, 000010000); * NBMISCIND:0x6A[17]=1 Set CMGOOD_OVERRIDE. */ set_nbmisc_enable_bits(nb_dev, 0x6A, ~0xffffffff, 0x00020000); /* NBMISIND:0x40 Bit[8]=1 and Bit[10]=1 following bits are required to set in order to allow LVDS or PWM features to work. */ set_nbmisc_enable_bits(nb_dev, 0x40, ~0xffffffff, 0x00000500); /* NBMISIND:0xC Bit[13]=1 Enable GSM mode for C1e or C3 with pop-up. */ set_nbmisc_enable_bits(nb_dev, 0x0C, ~0xffffffff, 0x00002000); /* Set NBMISIND:0x1F[3] to map NB F2 interrupt pin to INTB# */ set_nbmisc_enable_bits(nb_dev, 0x1F, ~0xffffffff, 0x00000008); /* * Enable access to DEV8 * Enable setPower message for all ports */ set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6, 1 << 6); set_nbmisc_enable_bits(nb_dev, 0x0b, 1 << 20, 1 << 20); set_nbmisc_enable_bits(nb_dev, 0x51, 1 << 20, 1 << 20); set_nbmisc_enable_bits(nb_dev, 0x53, 1 << 20, 1 << 20); set_nbmisc_enable_bits(nb_dev, 0x55, 1 << 20, 1 << 20); set_nbmisc_enable_bits(nb_dev, 0x57, 1 << 20, 1 << 20); set_nbmisc_enable_bits(nb_dev, 0x59, 1 << 20, 1 << 20); set_nbmisc_enable_bits(nb_dev, 0x5B, 1 << 20, 1 << 20); set_nbmisc_enable_bits(nb_dev, 0x5D, 1 << 20, 1 << 20); set_nbmisc_enable_bits(nb_dev, 0x5F, 1 << 20, 1 << 20); set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 7, 1 << 7); set_nbmisc_enable_bits(nb_dev, 0x07, 0x000000f0, 0x30); set_nbmisc_enable_bits(nb_dev, 0x01, 0xFFFFFFFF, 0x48); /* Disable bus-master trigger event from SB and Enable set_slot_power message to SB */ set_nbmisc_enable_bits(nb_dev, 0x0B, 0xffffffff, 0x500180); } /***************************************** * Some setting is from rpr. Some is from CIMx. *****************************************/ static void rs780_por_htiu_index_init(device_t nb_dev) { #if 0 /* get from rpr. */ set_htiu_enable_bits(nb_dev, 0x1C, 0x1<<17, 0x1<<17); set_htiu_enable_bits(nb_dev, 0x06, 0x1<<0, 0x0<<0); set_htiu_enable_bits(nb_dev, 0x06, 0x1<<1, 0x1<<1); set_htiu_enable_bits(nb_dev, 0x06, 0x1<<9, 0x1<<9); set_htiu_enable_bits(nb_dev, 0x06, 0x1<<13, 0x1<<13); set_htiu_enable_bits(nb_dev, 0x06, 0x1<<17, 0x1<<17); set_htiu_enable_bits(nb_dev, 0x06, 0x3<<15, 0x3<<15); set_htiu_enable_bits(nb_dev, 0x06, 0x1<<25, 0x1<<25); set_htiu_enable_bits(nb_dev, 0x06, 0x1<<30, 0x1<<30); set_htiu_enable_bits(nb_dev, 0x07, 0x1<<0, 0x1<<0); set_htiu_enable_bits(nb_dev, 0x07, 0x1<<1, 0x0<<1); set_htiu_enable_bits(nb_dev, 0x07, 0x1<<2, 0x0<<2); set_htiu_enable_bits(nb_dev, 0x07, 0x1<<15, 0x1<<15); set_htiu_enable_bits(nb_dev, 0x0C, 0x3<<0, 0x1<<0); set_htiu_enable_bits(nb_dev, 0x0C, 0x3<<2, 0x2<<2); set_htiu_enable_bits(nb_dev, 0x0C, 0x3<<4, 0x0<<4); /* A12 only */ set_htiu_enable_bits(nb_dev, 0x2D, 0x1<<4, 0x1<<4); set_htiu_enable_bits(nb_dev, 0x2D, 0x1<<6, 0x1<<6); set_htiu_enable_bits(nb_dev, 0x05, 0x1<<2, 0x1<<2); set_htiu_enable_bits(nb_dev, 0x1E, 0xFFFFFFFF, 0xFFFFFFFF); #else /* get from CIM. It is more reliable than above. */ set_htiu_enable_bits(nb_dev, 0x05, (1<<10|1<<9), 1<<10 | 1<<9); set_htiu_enable_bits(nb_dev, 0x06, ~0xFFFFFFFE, 0x04203A202); set_htiu_enable_bits(nb_dev, 0x07, ~0xFFFFFFF9, 0x8001/* | 7 << 8 */); /* fam 10 */ set_htiu_enable_bits(nb_dev, 0x15, ~0xFFFFFFFF, 1<<31| 1<<30 | 1<<27); set_htiu_enable_bits(nb_dev, 0x1C, ~0xFFFFFFFF, 0xFFFE0000); set_htiu_enable_bits(nb_dev, 0x4B, (1<<11), 1<<11); set_htiu_enable_bits(nb_dev, 0x0C, ~0xFFFFFFC0, 1<<0|1<<3); set_htiu_enable_bits(nb_dev, 0x17, (1<<27|1<<1), 0x1<<1); set_htiu_enable_bits(nb_dev, 0x17, 0x1 << 30, 0x1<<30); set_htiu_enable_bits(nb_dev, 0x19, (0xFFFFF+(1<<31)), 0x186A0+(1<<31)); set_htiu_enable_bits(nb_dev, 0x16, (0x3F<<10), 0x7<<10); set_htiu_enable_bits(nb_dev, 0x23, 0xFFFFFFF, 1<<28); set_htiu_enable_bits(nb_dev, 0x1E, 0xFFFFFFFF, 0xFFFFFFFF); #endif } /***************************************** * Configure RS780 registers to power-on default RPR. * POR: Power On Reset * RPR: Register Programming Requirements *****************************************/ static void rs780_por_init(device_t nb_dev) { printk(BIOS_INFO, "rs780_por_init\n"); /* ATINB_PCICFG_POR_TABLE, initialize the values for rs780 PCI Config registers */ rs780_por_pcicfg_init(nb_dev); /* ATINB_MCIND_POR_TABLE */ rs780_por_mc_index_init(nb_dev); /* ATINB_MISCIND_POR_TABLE */ rs780_por_misc_index_init(nb_dev); /* ATINB_HTIUNBIND_POR_TABLE */ rs780_por_htiu_index_init(nb_dev); /* ATINB_CLKCFG_PORT_TABLE */ /* rs780 A11 SB Link full swing? */ /* SET NB_MISC_REG01 BIT8 to Enable HDMI, reference CIMX_5_9_3 NBPOR_InitPOR(), * then the accesses to internal graphics IO space 0x60/0x64, are forwarded to * nbconfig:0x60/0x64 */ set_nbmisc_enable_bits(nb_dev, 0x01, ~(1 << 8), (1 << 8)); } /* enable CFG access to Dev8, which is the SB P2P Bridge */ static void enable_rs780_dev8(void) { set_nbmisc_enable_bits(PCI_DEV(0, 0, 0), 0x00, 1 << 6, 1 << 6); } static void rs780_before_pci_init(void) { } static void rs780_early_setup(void) { device_t nb_dev = PCI_DEV(0, 0, 0); printk(BIOS_INFO, "rs780_early_setup()\n"); /* The printk(BIOS_INFO, s) below cause the system unstable. */ switch (get_nb_rev(nb_dev)) { case REV_RS780_A11: /* printk(BIOS_INFO, "NB Revision is A11.\n"); */ break; case REV_RS780_A12: /* printk(BIOS_INFO, "NB Revision is A12.\n"); */ break; case REV_RS780_A13: /* printk(BIOS_INFO, "NB Revision is A13.\n"); */ break; } if (is_famly10()) fam10_optimization(); else k8_optimization(); rs780_por_init(nb_dev); }