/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef _SB800_FAN_H_ #define _SB800_FAN_H_ #include void init_sb800_IMC_fans(struct device *dev); void init_sb800_MANUAL_fans(struct device *dev); /* Fan Register Definitions */ #define FAN_0_OFFSET 0x00 #define FAN_1_OFFSET 0x10 #define FAN_2_OFFSET 0x20 #define FAN_3_OFFSET 0x30 #define FAN_4_OFFSET 0x40 #define FAN_INPUT_CONTROL_REG 0x00 #define FAN_CONTROL_REG 0x01 #define FAN_FREQUENCY_REG 0x02 #define FAN_LOW_DUTY_REG 0x03 #define FAN_MED_DUTY_REG 0x04 #define FAN_MULTIPLIER_REG 0x05 #define FAN_LOW_TEMP_LO_REG 0x06 #define FAN_LOW_TEMP_HI_REG 0x07 #define FAN_MED_TEMP_LO_REG 0x08 #define FAN_MED_TEMP_HI_REG 0x09 #define FAN_HIGH_TEMP_LO_REG 0x0A #define FAN_HIGH_TEMP_HI_REG 0x0B #define FAN_LINEAR_RANGE_REG 0x0C #define FAN_LINEAR_HOLD_REG 0x0D /* FanXInputControl Definitions */ #define FAN_INPUT_INTERNAL_DIODE 0 #define FAN_INPUT_TEMP0 1 #define FAN_INPUT_TEMP1 2 #define FAN_INPUT_TEMP2 3 #define FAN_INPUT_TEMP3 4 #define FAN_INPUT_TEMP0_FILTER 5 #define FAN_INPUT_ZERO 6 #define FAN_INPUT_DISABLED 7 /* FanXControl Definitions */ #define FAN_AUTOMODE (1 << 0) #define FAN_LINEARMODE (1 << 1) #define FAN_STEPMODE 0 /* ~(1 << 1) */ #define FAN_POLARITY_HIGH (1 << 2) #define FAN_POLARITY_LOW 0 /*~(1 << 2) */ /* FanXLowDuty Definitions */ #define FAN_POLARITY_HIGH_MAX_SPEED 0xff #define FAN_POLARITY_LOW_MAX_SPEED 0x00 /* FanXFreq Definitions */ /* Typically, fans run at 25KHz */ #define FREQ_28KHZ 0x0 #define FREQ_25KHZ 0x1 #define FREQ_23KHZ 0x2 #define FREQ_21KHZ 0x3 #define FREQ_29KHZ 0x4 #define FREQ_18KHZ 0x5 /* Any value > 05h and < F7: Freq = 1/(FreqDiv * 2048 * 15ns) */ #define FREQ_100HZ 0xF7 #define FREQ_87HZ 0xF8 #define FREQ_58HZ 0xF9 #define FREQ_44HZ 0xFA #define FREQ_35HZ 0xFB #define FREQ_29HZ 0xFC #define FREQ_22HZ 0xFD #define FREQ_14HZ 0xFE #define FREQ_11HZ 0xFF /* IMC Fan Control Definitions */ #define IMC_MODE1_FAN_ENABLED (1 << 0) #define IMC_MODE1_FAN_IMC_CONTROLLED (1 << 2) #define IMC_MODE1_FAN_LINEAR_MODE (1 << 4) #define IMC_MODE1_FAN_STEP_MODE 0 /* ~( 1 << 4 ) */ #define IMC_MODE1_NO_FANOUT 0 /* ~( 7 << 5 ) */ #define IMC_MODE1_FANOUT0 (1 << 5) #define IMC_MODE1_FANOUT1 (2 << 5) #define IMC_MODE1_FANOUT2 (3 << 5) #define IMC_MODE1_FANOUT3 (4 << 5) #define IMC_MODE1_FANOUT4 (5 << 5) #define IMC_MODE2_TEMPIN_NONE 0 /* ~( 7 << 0) */ #define IMC_MODE2_TEMPIN_0 1 #define IMC_MODE2_TEMPIN_1 2 #define IMC_MODE2_TEMPIN_2 3 #define IMC_MODE2_TEMPIN_3 4 #define IMC_MODE2_INT_TEMPIN 5 #define IMC_MODE2_TEMPIN_SB_TSI 6 #define IMC_MODE2_TEMPIN_OTHER 7 #define IMC_MODE2_FANIN_NONE 0 /* ~ (7 << 3) */ #define IMC_MODE2_FANIN0 (1 << 3) #define IMC_MODE2_FANIN1 (2 << 3) #define IMC_MODE2_FANIN2 (3 << 3) #define IMC_MODE2_FANIN3 (4 << 3) #define IMC_MODE2_FANIN4 (5 << 3) #define IMC_MODE2_TEMP_AVERAGING_ENABLED (1 << 6) #define IMC_MODE2_TEMP_AVERAGING_DISABLED 0 /* ~( 1 << 6 ) */ #define IMC_TEMP_SENSOR_ON_SMBUS_0 0 #define IMC_TEMP_SENSOR_ON_SMBUS_2 1 #define IMC_TEMP_SENSOR_ON_SMBUS_3 2 #define IMC_TEMP_SENSOR_ON_SMBUS_4 3 #define IMC_ZONE0 0 #define IMC_ZONE1 1 #define IMC_ZONE2 2 #define IMC_ZONE3 3 #define IMC_ZONE4 4 #define IMC_TEMPIN_TUNING_DEFAULT_MODE 0 #define IMC_TEMPIN_TUNING_HIGH_CURRENT_RATIO 1 #define IMC_TEMPIN_TUNING_HIGH_CURRENT 2 #define IMC_TEMPIN_TUNING_DISABLE_FILTERING (1 << 2) /* IMCFUNSupportBitMap - Zone enable values */ #define IMC_ENABLE_ZONE0 0x111 #define IMC_ENABLE_ZONE1 0x222 #define IMC_ENABLE_ZONE2 0x333 #define IMC_ENABLE_ZONE3 0x444 #define IMC_ENABLE_TEMPIN0 (1 << 12) #define IMC_ENABLE_TEMPIN1 (1 << 13) #define IMC_ENABLE_TEMPIN2 (1 << 14) #define IMC_ENABLE_TEMPIN3 (1 << 15) /* Array size settings */ #define IMC_FAN_THRESHOLD_COUNT 9 #define IMC_FAN_SPEED_COUNT 8 #define IMC_FAN_CONFIG_COUNT 8 #define FAN_REGISTER_COUNT 15 #endif