/* SPDX-License-Identifier: GPL-2.0-only */ /* * ACPI - create the Fixed ACPI Description Tables (FADT) */ #include #include #include #include #include #include "SBPLATFORM.h" #ifndef FADT_BOOT_ARCH #if LEGACY_FREE #define FADT_BOOT_ARCH ACPI_FADT_LEGACY_FREE #else #define FADT_BOOT_ARCH (ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042) #endif #endif /* * Reference section 5.2.9 Fixed ACPI Description Table (FADT) * in the ACPI 3.0b specification. */ void acpi_fill_fadt(acpi_fadt_t *fadt) { u16 val = 0; printk(BIOS_DEBUG, "ACPI_BLK_BASE: 0x%04x\n", ACPI_BLK_BASE); fadt->sci_int = 9; /* HUDSON 1 - IRQ 09 - ACPI SCI */ val = PM1_EVT_BLK_ADDRESS; WritePMIO(SB_PMIOA_REG60, AccWidthUint16, &val); val = PM1_CNT_BLK_ADDRESS; WritePMIO(SB_PMIOA_REG62, AccWidthUint16, &val); val = PM1_TMR_BLK_ADDRESS; WritePMIO(SB_PMIOA_REG64, AccWidthUint16, &val); val = GPE0_BLK_ADDRESS; WritePMIO(SB_PMIOA_REG68, AccWidthUint16, &val); /* CpuControl is in \_PR.CP00, 6 bytes */ val = CPU_CNT_BLK_ADDRESS; WritePMIO(SB_PMIOA_REG66, AccWidthUint16, &val); val = 0; WritePMIO(SB_PMIOA_REG6A, AccWidthUint16, &val); val = ACPI_PMA_CNT_BLK_ADDRESS; WritePMIO(SB_PMIOA_REG6E, AccWidthUint16, &val); /* AcpiDecodeEnable, When set, SB uses the contents of the * PM registers at index 60-6B to decode ACPI I/O address. * AcpiSmiEn & SmiCmdEn*/ val = BIT0 | BIT1 | BIT2 | BIT4; WritePMIO(SB_PMIOA_REG74, AccWidthUint16, &val); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ outl(0x1, PM1_CNT_BLK_ADDRESS); /* set SCI_EN */ fadt->pm1a_evt_blk = PM1_EVT_BLK_ADDRESS; fadt->pm1a_cnt_blk = PM1_CNT_BLK_ADDRESS; fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK_ADDRESS; fadt->pm_tmr_blk = PM1_TMR_BLK_ADDRESS; fadt->gpe0_blk = GPE0_BLK_ADDRESS; fadt->pm1_evt_len = 4; /* 32 bits */ fadt->pm1_cnt_len = 2; /* 16 bits */ fadt->pm2_cnt_len = 1; /* 8 bits */ fadt->pm_tmr_len = 4; /* 32 bits */ fadt->gpe0_blk_len = 8; /* 64 bits */ fadt->p_lvl2_lat = ACPI_FADT_C2_NOT_SUPPORTED; fadt->p_lvl3_lat = ACPI_FADT_C3_NOT_SUPPORTED; fadt->duty_offset = 1; /* CLK_VAL bits 3:1 */ fadt->duty_width = 3; /* CLK_VAL bits 3:1 */ fadt->day_alrm = 0; /* 0x7d these have to be */ fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ fadt->iapc_boot_arch = FADT_BOOT_ARCH; /* See table 5-10 */ fadt->res2 = 0; /* reserved, MUST be 0 ACPI 3.0 */ fadt->flags |= ACPI_FADT_WBINVD | /* See table 5-10 ACPI 3.0a spec */ ACPI_FADT_C1_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_32BIT_TIMER | ACPI_FADT_PCI_EXPRESS_WAKE | ACPI_FADT_S4_RTC_VALID | ACPI_FADT_REMOTE_POWER_ON; fadt->ARM_boot_arch = 0; /* Must be zero if ACPI Revision <= 5.0 */ fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; fadt->x_pm1a_evt_blk.bit_width = 32; fadt->x_pm1a_evt_blk.bit_offset = 0; fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; fadt->x_pm1a_evt_blk.addrl = PM1_EVT_BLK_ADDRESS; fadt->x_pm1a_evt_blk.addrh = 0x0; fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; fadt->x_pm1a_cnt_blk.bit_width = 16; fadt->x_pm1a_cnt_blk.bit_offset = 0; fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_UNDEFINED; fadt->x_pm1a_cnt_blk.addrl = PM1_CNT_BLK_ADDRESS; fadt->x_pm1a_cnt_blk.addrh = 0x0; fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; fadt->x_pm2_cnt_blk.bit_width = 8; /* Hudson 1 Pm2Control is 8 bits */ fadt->x_pm2_cnt_blk.bit_offset = 0; fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK_ADDRESS; fadt->x_pm2_cnt_blk.addrh = 0x0; fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO; fadt->x_pm_tmr_blk.bit_width = 32; fadt->x_pm_tmr_blk.bit_offset = 0; fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; fadt->x_pm_tmr_blk.addrl = PM1_TMR_BLK_ADDRESS; fadt->x_pm_tmr_blk.addrh = 0x0; fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO; fadt->x_gpe0_blk.bit_width = 64; /* EventStatus + Event Enable */ fadt->x_gpe0_blk.bit_offset = 0; fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; fadt->x_gpe0_blk.addrl = GPE0_BLK_ADDRESS; fadt->x_gpe0_blk.addrh = 0x0; }