/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _CIMX_SB800_CHIP_H_
#define _CIMX_SB800_CHIP_H_
#include "fan.h" /* include for #defines used in devicetree.cb */
/*
* configuration set in mainboard/devicetree.cb
* boot_switch_sata_ide:
* 0 -set SATA as primary, PATA(IDE) as secondary.
* 1 -set PATA(IDE) as primary, SATA as secondary. if you want to boot from IDE,
* gpp_configuration - The configuration of General Purpose Port A/B/C/D
* 0(GPP_CFGMODE_X4000) -PortA Lanes[3:0]
* 2(GPP_CFGMODE_X2200) -PortA Lanes[1:0], PortB Lanes[3:2]
* 3(GPP_CFGMODE_X2110) -PortA Lanes[1:0], PortB Lane2, PortC Lane3
* 4(GPP_CFGMODE_X1111) -PortA Lanes0, PortB Lane1, PortC Lane2, PortD Lane3
*/
struct southbridge_amd_cimx_sb800_config
{
u32 boot_switch_sata_ide : 1;
u32 disconnect_pcib : 1;
u8 gpp_configuration;
/*
* SB800 IMC and fan control
*/
u16 imc_port_address;
u32 fan0_enabled : 1;
u32 fan1_enabled : 1;
u32 fan2_enabled : 1;
u32 fan3_enabled : 1;
u32 fan4_enabled : 1;
u32 imc_fan_zone0_enabled : 1;
u32 imc_fan_zone1_enabled : 1;
u32 imc_fan_zone2_enabled : 1;
u32 imc_fan_zone3_enabled : 1;
u32 imc_tempin0_enabled : 1;
u32 imc_tempin1_enabled : 1;
u32 imc_tempin2_enabled : 1;
u32 imc_tempin3_enabled : 1;
union {
struct {
u8 fan0_control_reg_value;
u8 fan0_frequency_reg_value;
u8 fan0_low_duty_reg_value;
u8 fan0_med_duty_reg_value;
u8 fan0_multiplier_reg_value;
u8 fan0_low_temp_lo_reg_value;
u8 fan0_low_temp_hi_reg_value;
u8 fan0_med_temp_lo_reg_value;
u8 fan0_med_temp_hi_reg_value;
u8 fan0_high_temp_lo_reg_value;
u8 fan0_high_temp_hi_reg_value;
u8 fan0_linear_range_reg_value;
u8 fan0_linear_hold_reg_value;
};
u8 fan0_config_vals[FAN_REGISTER_COUNT];
};
union {
struct {
u8 fan1_control_reg_value;
u8 fan1_frequency_reg_value;
u8 fan1_low_duty_reg_value;
u8 fan1_med_duty_reg_value;
u8 fan1_multiplier_reg_value;
u8 fan1_low_temp_lo_reg_value;
u8 fan1_low_temp_hi_reg_value;
u8 fan1_med_temp_lo_reg_value;
u8 fan1_med_temp_hi_reg_value;
u8 fan1_high_temp_lo_reg_value;
u8 fan1_high_temp_hi_reg_value;
u8 fan1_linear_range_reg_value;
u8 fan1_linear_hold_reg_value;
};
u8 fan1_config_vals[FAN_REGISTER_COUNT];
};
union {
struct {
u8 fan2_control_reg_value;
u8 fan2_frequency_reg_value;
u8 fan2_low_duty_reg_value;
u8 fan2_med_duty_reg_value;
u8 fan2_multiplier_reg_value;
u8 fan2_low_temp_lo_reg_value;
u8 fan2_low_temp_hi_reg_value;
u8 fan2_med_temp_lo_reg_value;
u8 fan2_med_temp_hi_reg_value;
u8 fan2_high_temp_lo_reg_value;
u8 fan2_high_temp_hi_reg_value;
u8 fan2_linear_range_reg_value;
u8 fan2_linear_hold_reg_value;
};
u8 fan2_config_vals[FAN_REGISTER_COUNT];
};
union {
struct {
u8 fan3_control_reg_value;
u8 fan3_frequency_reg_value;
u8 fan3_low_duty_reg_value;
u8 fan3_med_duty_reg_value;
u8 fan3_multiplier_reg_value;
u8 fan3_low_temp_lo_reg_value;
u8 fan3_low_temp_hi_reg_value;
u8 fan3_med_temp_lo_reg_value;
u8 fan3_med_temp_hi_reg_value;
u8 fan3_high_temp_lo_reg_value;
u8 fan3_high_temp_hi_reg_value;
u8 fan3_linear_range_reg_value;
u8 fan3_linear_hold_reg_value;
};
u8 fan3_config_vals[FAN_REGISTER_COUNT];
};
union {
struct {
u8 fan4_control_reg_value;
u8 fan4_frequency_reg_value;
u8 fan4_low_duty_reg_value;
u8 fan4_med_duty_reg_value;
u8 fan4_multiplier_reg_value;
u8 fan4_low_temp_lo_reg_value;
u8 fan4_low_temp_hi_reg_value;
u8 fan4_med_temp_lo_reg_value;
u8 fan4_med_temp_hi_reg_value;
u8 fan4_high_temp_lo_reg_value;
u8 fan4_high_temp_hi_reg_value;
u8 fan4_linear_range_reg_value;
u8 fan4_linear_hold_reg_value;
};
u8 fan4_config_vals[FAN_REGISTER_COUNT];
};
union {
struct {
u8 imc_zone0_mode1;
u8 imc_zone0_mode2;
u8 imc_zone0_temp_offset;
u8 imc_zone0_hysteresis;
u8 imc_zone0_smbus_addr;
u8 imc_zone0_smbus_num;
u8 imc_zone0_pwm_step;
u8 imc_zone0_ramping;
};
u8 imc_zone0_config_vals[IMC_FAN_CONFIG_COUNT];
};
u8 imc_zone0_thresholds[IMC_FAN_THRESHOLD_COUNT];
u8 imc_zone0_fanspeeds[IMC_FAN_SPEED_COUNT];
union {
struct {
u8 imc_zone1_mode1;
u8 imc_zone1_mode2;
u8 imc_zone1_temp_offset;
u8 imc_zone1_hysteresis;
u8 imc_zone1_smbus_addr;
u8 imc_zone1_smbus_num;
u8 imc_zone1_pwm_step;
u8 imc_zone1_ramping;
};
u8 imc_zone1_config_vals[IMC_FAN_CONFIG_COUNT];
};
u8 imc_zone1_thresholds[IMC_FAN_THRESHOLD_COUNT];
u8 imc_zone1_fanspeeds[IMC_FAN_SPEED_COUNT];
union {
struct {
u8 imc_zone2_mode1;
u8 imc_zone2_mode2;
u8 imc_zone2_temp_offset;
u8 imc_zone2_hysteresis;
u8 imc_zone2_smbus_addr;
u8 imc_zone2_smbus_num;
u8 imc_zone2_pwm_step;
u8 imc_zone2_ramping;
};
u8 imc_zone2_config_vals[IMC_FAN_CONFIG_COUNT];
};
u8 imc_zone2_thresholds[IMC_FAN_THRESHOLD_COUNT];
u8 imc_zone2_fanspeeds[IMC_FAN_SPEED_COUNT];
union {
struct {
u8 imc_zone3_mode1;
u8 imc_zone3_mode2;
u8 imc_zone3_temp_offset;
u8 imc_zone3_hysteresis;
u8 imc_zone3_smbus_addr;
u8 imc_zone3_smbus_num;
u8 imc_zone3_pwm_step;
u8 imc_zone3_ramping;
};
u8 imc_zone3_config_vals[IMC_FAN_CONFIG_COUNT];
};
u8 imc_zone3_thresholds[IMC_FAN_THRESHOLD_COUNT];
u8 imc_zone3_fanspeeds[IMC_FAN_SPEED_COUNT];
u32 imc_tempin0_at;
u32 imc_tempin0_ct;
u8 imc_tempin0_tuning_param;
u32 imc_tempin1_at;
u32 imc_tempin1_ct;
u8 imc_tempin1_tuning_param;
u32 imc_tempin2_at;
u32 imc_tempin2_ct;
u8 imc_tempin2_tuning_param;
u32 imc_tempin3_at;
u32 imc_tempin3_ct;
u8 imc_tempin3_tuning_param;
};
#endif /* _CIMX_SB800_CHIP_H_ */