##
## This file is part of the coreboot project.
##
## Copyright (C) 2011 Advanced Micro Devices, Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

config SOUTHBRIDGE_AMD_CIMX_SB800
	bool
	default n
	select IOAPIC
	select AMD_SB_CIMX

if SOUTHBRIDGE_AMD_CIMX_SB800
config BOOTBLOCK_SOUTHBRIDGE_INIT
        string
        default "southbridge/amd/cimx/sb800/bootblock.c"

config ENABLE_IDE_COMBINED_MODE
	bool "Enable SATA IDE combined mode"
	default n
	help
	  If Combined Mode is enabled. IDE controller is exposed and
	  SATA controller has control over Port0 through Port3,
	  IDE controller has control over Port4 and Port5.

	  If Combined Mode is disabled, IDE controller is hidden and
	  SATA controller has full control of all 6 Ports when operating in non-IDE mode.

config IDE_COMBINED_MODE
	hex
	default "0x0" if ENABLE_IDE_COMBINED_MODE
	default "0x1" if !ENABLE_IDE_COMBINED_MODE

choice
	prompt "SATA Mode"
	default SB800_SATA_IDE
	help
	  Select the mode in which SATA should be driven. NATIVE AHCI, or RAID.
	  The default is NATIVE.

config SB800_SATA_IDE
	bool "NATIVE"
	help
	  NATIVE is the default mode and does not require a ROM.

config SB800_SATA_AHCI
	bool "AHCI"
	help
	  AHCI may work with or without AHCI ROM. It depends on the payload support.
	  For example, seabios does not require the AHCI ROM.

config SB800_SATA_RAID
	bool "RAID"
	help
	  sb800 RAID mode must have the two required ROM files.

endchoice

config SB800_SATA_MODE
        hex
	depends on (SB800_SATA_IDE || SB800_SATA_RAID || SB800_SATA_AHCI)
	default "0x0" if SB800_SATA_IDE
	default "0x1" if SB800_SATA_RAID
	default "0x2" if SB800_SATA_AHCI

config SB_SUPERIO_HWM
        bool
        default n

if SB800_SATA_AHCI
config AHCI_ROM_ID
	string "AHCI device PCI IDs"
	default "1002,4391"

config SB800_AHCI_ROM
	bool "Add a AHCI ROM"

config AHCI_ROM_FILE
	string "AHCI ROM path and filename"
	depends on SB800_AHCI_ROM
	default "site-local/sb800/ahci.bin"
endif

if SB800_SATA_RAID
config RAID_ROM_ID
	string "RAID device PCI IDs"
	default "1002,4393"
        help
          1002,4392 for SATA NON-RAID5 module, 1002,4393 for SATA RAID5 mode

config RAID_ROM_FILE
	string "RAID ROM path and filename"
	depends on SB800_SATA_RAID
	default "site-local/sb800/raid.bin"

config RAID_MISC_ROM_FILE
        string "RAID Misc ROM path and filename"
        default "site-local/sb800/misc.bin"
	depends on SB800_SATA_RAID

config RAID_MISC_ROM_POSITION
	hex "RAID Misc ROM Position"
	default 0xFFF00000
	depends on SB800_SATA_RAID
	help
	  The RAID ROM requires that the MISC ROM is located between the range
	  0xFFF0_0000 to 0xFFF0_FFFF. Also, it must 1K bytes aligned.
	  The CONFIG_ROM_SIZE must larger than 0x100000.

endif

endif #SOUTHBRIDGE_AMD_CIMX_SB800