/*============================================================================ Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. This software and any related documentation (the "Materials") are the confidential proprietary information of AMD. Unless otherwise provided in a software agreement specifically licensing the Materials, the Materials are provided in confidence and may not be distributed, modified, or reproduced in whole or in part by any means. LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU. AMD does not assume any responsibility for any errors which may appear in the Materials nor any responsibility to support or update the Materials. AMD retains the right to modify the Materials at any time, without notice, and is not obligated to provide such modified Materials to you. NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any further information, software, technical information, know-how, or show-how available to you. U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to the restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or its successor. Use of the Materials by the Government constitutes acknowledgement of AMD's proprietary rights in them. ============================================================================*/ //@DOC // in amd8132_bridge.c /* $1.0$ */ // Description: amd 8132 support // by yhlu // //============================================================================ #include #include #include #include #include #include #include #include #define NMI_OFF 0 #define NPUML 0xD9 /* Non prefetchable upper memory limit */ #define NPUMB 0xD8 /* Non prefetchable upper memory base */ static void amd8132_walk_children(struct bus *bus, void (*visit)(device_t dev, void *ptr), void *ptr) { device_t child; for(child = bus->children; child; child = child->sibling) { if (child->path.type != DEVICE_PATH_PCI) { continue; } if (child->hdr_type == PCI_HEADER_TYPE_BRIDGE) { amd8132_walk_children(&child->link[0], visit, ptr); } visit(child, ptr); } } struct amd8132_bus_info { unsigned sstatus; unsigned rev; int master_devices; int max_func; }; static void amd8132_count_dev(device_t dev, void *ptr) { struct amd8132_bus_info *info = ptr; /* Don't count pci bridges */ if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { info->master_devices++; } if (PCI_FUNC(dev->path.u.pci.devfn) > info->max_func) { info->max_func = PCI_FUNC(dev->path.u.pci.devfn); } } static void amd8132_pcix_tune_dev(device_t dev, void *ptr) { struct amd8132_bus_info *info = ptr; unsigned cap; unsigned status, cmd, orig_cmd; unsigned max_read, max_tran; int sibs; if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL) { return; } cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (!cap) { return; } /* How many siblings does this device have? */ sibs = info->master_devices - 1; printk_debug("%s AMD8132 PCI-X tuning\n", dev_path(dev)); status = pci_read_config32(dev, cap + PCI_X_STATUS); orig_cmd = cmd = pci_read_config16(dev,cap + PCI_X_CMD); max_read = (status & PCI_X_STATUS_MAX_READ) >> 21; max_tran = (status & PCI_X_STATUS_MAX_SPLIT) >> 23; if (info->rev == 0x01) { // only a1 need it /* Errata #53 Limit the number of split transactions to avoid starvation */ if (sibs >= 2) { /* At most 2 outstanding split transactions when we have * 3 or more bus master devices on the bus. */ if (max_tran > 1) { max_tran = 1; } } else if (sibs == 1) { /* At most 4 outstanding split transactions when we have * 2 bus master devices on the bus. */ if (max_tran > 3) { max_tran = 3; } } else { /* At most 8 outstanding split transactions when we have * only one bus master device on the bus. */ if (max_tran > 4) { max_tran = 4; } } } if (max_read != ((cmd & PCI_X_CMD_MAX_READ) >> 2)) { cmd &= ~PCI_X_CMD_MAX_READ; cmd |= max_read << 2; } if (max_tran != ((cmd & PCI_X_CMD_MAX_SPLIT) >> 4)) { cmd &= ~PCI_X_CMD_MAX_SPLIT; cmd |= max_tran << 4; } /* Don't attempt to handle PCI-X errors */ cmd &= ~PCI_X_CMD_DPERR_E; if (orig_cmd != cmd) { pci_write_config16(dev, cap + PCI_X_CMD, cmd); } } static unsigned int amd8132_scan_bus(struct bus *bus, unsigned min_devfn, unsigned max_devfn, unsigned int max) { struct amd8132_bus_info info; unsigned pos; /* Find the children on the bus */ max = pci_scan_bus(bus, min_devfn, max_devfn, max); /* Find the revision of the 8132 */ info.rev = pci_read_config8(bus->dev, PCI_CLASS_REVISION); /* Find the pcix capability and get the secondary bus status */ pos = pci_find_capability(bus->dev, PCI_CAP_ID_PCIX); info.sstatus = pci_read_config16(bus->dev, pos + PCI_X_SEC_STATUS); /* Print the PCI-X bus speed */ printk_debug("PCI: %02x: %s sstatus=%04x rev=%02x \n", bus->secondary, pcix_speed(info.sstatus), info.sstatus, info.rev); /* Examine the bus and find out how loaded it is */ info.max_func = 0; info.master_devices = 0; amd8132_walk_children(bus, amd8132_count_dev, &info); #if 0 /* Disable the bus if there are no devices on it */ if (!bus->children) { unsigned pcix_misc; /* Disable all of my children */ disable_children(bus); /* Remember the device is disabled */ bus->dev->enabled = 0; /* Disable the PCI-X clocks */ pcix_misc = pci_read_config32(bus->dev, 0x40); pcix_misc &= ~(0x1f << 16); pci_write_config32(bus->dev, 0x40, pcix_misc); return max; } #endif /* If we are in conventional PCI mode nothing more is necessary. */ if (PCI_X_SSTATUS_MFREQ(info.sstatus) == PCI_X_SSTATUS_CONVENTIONAL_PCI) { return max; } /* Tune the devices on the bus */ amd8132_walk_children(bus, amd8132_pcix_tune_dev, &info); return max; } static unsigned int amd8132_scan_bridge(device_t dev, unsigned int max) { return do_pci_scan_bridge(dev, max, amd8132_scan_bus); } static void amd8132_pcix_init(device_t dev) { uint32_t dword; uint8_t byte; unsigned chip_rev; /* Find the revision of the 8132 */ chip_rev = pci_read_config8(dev, PCI_CLASS_REVISION); /* Enable memory write and invalidate ??? */ dword = pci_read_config32(dev, 0x04); dword |= 0x10; dword &= ~(1<<6); // PERSP Parity Error Response pci_write_config32(dev, 0x04, dword); if (chip_rev == 0x01) { /* Errata #37 */ byte = pci_read_config8(dev, 0x0c); if(byte == 0x08 ) pci_write_config8(dev, 0x0c, 0x10); #if 0 /* Errata #59*/ dword = pci_read_config32(dev, 0x40); dword &= ~(1<<31); pci_write_config32(dev, 0x40, dword); #endif } /* Set up error reporting, enable all */ /* system error enable */ dword = pci_read_config32(dev, 0x04); dword |= (1<<8); pci_write_config32(dev, 0x04, dword); /* system and error parity enable */ dword = pci_read_config32(dev, 0x3c); dword |= (3<<16); pci_write_config32(dev, 0x3c, dword); dword = pci_read_config32(dev, 0x40); // dword &= ~(1<<31); /* WriteChainEnable */ dword |= (1<<31); dword |= (1<<7);// must set to 1 dword |= (3<<21); //PCIErrorSerrDisable pci_write_config32(dev, 0x40, dword); /* EXTARB = 1, COMPAT = 0 */ dword = pci_read_config32(dev, 0x48); dword |= (1<<3); dword &= ~(1<<0); dword |= (1<<15); //CLEARPCILOG_L dword |= (1<<19); //PERR FATAL Enable dword |= (1<<22); // SERR FATAL Enable dword |= (1<<23); // LPMARBENABLE dword |= (0x61<<24); //LPMARBCOUNT pci_write_config32(dev, 0x48, dword); dword = pci_read_config32(dev, 0x4c); dword |= (1<<6); //intial prefetch for memory read line request dword |= (1<<9); //continuous prefetch Enable for memory read line request pci_write_config32(dev, 0x4c, dword); /* Disable Single-Bit-Error Correction [30] = 0 */ dword = pci_read_config32(dev, 0x70); dword &= ~(1<<30); pci_write_config32(dev, 0x70, dword); //link dword = pci_read_config32(dev, 0xd4); dword |= (0x5c<<16); pci_write_config32(dev, 0xd4, dword); /* TxSlack0 [16:17] = 0, RxHwLookahdEn0 [18] = 1, TxSlack1 [24:25] = 0, RxHwLookahdEn1 [26] = 1 */ dword = pci_read_config32(dev, 0xdc); dword |= (1<<1) | (1<<4); // stream disable 1 to 0 , DBLINSRATE dword |= (1<<18)|(1<<26); dword &= ~((3<<16)|(3<<24)); pci_write_config32(dev, 0xdc, dword); /* Set up CRC flood enable */ dword = pci_read_config32(dev, 0xc0); if(dword) { /* do device A only */ #if 0 dword = pci_read_config32(dev, 0xc4); dword |= (1<<1); pci_write_config32(dev, 0xc4, dword); dword = pci_read_config32(dev, 0xc8); dword |= (1<<1); pci_write_config32(dev, 0xc8, dword); #endif if (chip_rev == 0x11) { /* [18] Clock Gate Enable = 1 */ dword = pci_read_config32(dev, 0xf0); dword |= 0x00040008; pci_write_config32(dev, 0xf0, dword); } } return; } #define BRIDGE_40_BIT_SUPPORT 0 #if BRIDGE_40_BIT_SUPPORT static void bridge_read_resources(struct device *dev) { struct resource *res; pci_bus_read_resources(dev); res = find_resource(dev, PCI_MEMORY_BASE); if (res) { res->limit = 0xffffffffffULL; } } static void bridge_set_resources(struct device *dev) { struct resource *res; res = find_resource(dev, PCI_MEMORY_BASE); if (res) { resource_t base, end; /* set the memory range */ dev->command |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; res->flags |= IORESOURCE_STORED; compute_allocate_resource(&dev->link[0], res, IORESOURCE_MEM | IORESOURCE_PREFETCH, IORESOURCE_MEM); base = res->base; end = resource_end(res); pci_write_config16(dev, PCI_MEMORY_BASE, base >> 16); pci_write_config8(dev, NPUML, (base >> 32) & 0xff); pci_write_config16(dev, PCI_MEMORY_LIMIT, end >> 16); pci_write_config8(dev, NPUMB, (end >> 32) & 0xff); report_resource_stored(dev, res, ""); } pci_dev_set_resources(dev); } #endif /* BRIDGE_40_BIT_SUPPORT */ static struct device_operations pcix_ops = { #if BRIDGE_40_BIT_SUPPORT .read_resources = bridge_read_resources, .set_resources = bridge_set_resources, #else .read_resources = pci_bus_read_resources, .set_resources = pci_dev_set_resources, #endif .enable_resources = pci_bus_enable_resources, .init = amd8132_pcix_init, .scan_bus = amd8132_scan_bridge, .reset_bus = pci_bus_reset, }; static struct pci_driver pcix_driver __pci_driver = { .ops = &pcix_ops, .vendor = PCI_VENDOR_ID_AMD, .device = 0x7458, }; static void ioapic_enable(device_t dev) { uint32_t value; value = pci_read_config32(dev, 0x44); if (dev->enabled) { value |= ((1 << 1) | (1 << 0)); } else { value &= ~((1 << 1) | (1 << 0)); } pci_write_config32(dev, 0x44, value); } static void amd8132_ioapic_init(device_t dev) { uint32_t dword; unsigned chip_rev; /* Find the revision of the 8132 */ chip_rev = pci_read_config8(dev, PCI_CLASS_REVISION); if (chip_rev == 0x01) { #if 0 /* Errata #43 */ dword = pci_read_config32(dev, 0xc8); dword |= (0x3<<23); pci_write_config32(dev, 0xc8, dword); #endif } if( (chip_rev == 0x11) ||(chip_rev == 0x12) ) { //for b1 b2 /* Errata #73 */ dword = pci_read_config32(dev, 0x80); dword |= (0x1f<<5); pci_write_config32(dev, 0x80, dword); dword = pci_read_config32(dev, 0x88); dword |= (0x1f<<5); pci_write_config32(dev, 0x88, dword); /* Errata #74 */ dword = pci_read_config32(dev, 0x7c); dword &= ~(0x3<<30); dword |= (0x01<<30); pci_write_config32(dev, 0x7c, dword); } } static struct pci_operations pci_ops_pci_dev = { .set_subsystem = pci_dev_set_subsystem, }; static struct device_operations ioapic_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = amd8132_ioapic_init, .scan_bus = 0, .enable = ioapic_enable, .ops_pci = &pci_ops_pci_dev, }; static struct pci_driver ioapic_driver __pci_driver = { .ops = &ioapic_ops, .vendor = PCI_VENDOR_ID_AMD, .device = 0x7459, };