##
## This file is part of the coreboot project.
##
## Copyright (C) 2010 Advanced Micro Devices, Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##

config SOUTHBRIDGE_AMD_AGESA_HUDSON
	bool
	select IOAPIC
	select HAVE_USBDEBUG
	select HAVE_HARD_RESET

config SOUTHBRIDGE_AMD_AGESA_YANGTZE
	bool
	select IOAPIC
	select HAVE_USBDEBUG
	select HAVE_HARD_RESET

if SOUTHBRIDGE_AMD_AGESA_HUDSON || SOUTHBRIDGE_AMD_AGESA_YANGTZE

config BOOTBLOCK_SOUTHBRIDGE_INIT
	string
	default "southbridge/amd/agesa/hudson/bootblock.c"

config SOUTHBRIDGE_AMD_HUDSON_SKIP_ISA_DMA_INIT
	bool
	default n

config EHCI_BAR
	hex
	default 0xfef00000

config EHCI_DEBUG_OFFSET
	hex
	default 0xe0

config HUDSON_XHCI_ENABLE
	bool "Enable Hudson XHCI Controller"
	default y
	help
	  The XHCI controller must be enabled and the XHCI firmware
	  must be added in order to have USB 3.0 support configured
	  by coreboot. The OS will be responsible for enabling the XHCI
	  controller if the the XHCI firmware is available but the
	  XHCI controller is not enabled by coreboot.

config HUDSON_XHCI_FWM
	bool "Add xhci firmware"
	default y
	help
	  Add Hudson 2/3/4 XHCI Firmware to support the onboard USB 3.0

config HUDSON_IMC_FWM
	bool "Add imc firmware"
	default y
        help
	  Add Hudson 2/3/4 IMC Firmware to support the onboard fan control

config HUDSON_GEC_FWM
	bool
	default n
        help
	  Add Hudson 2/3/4 GEC Firmware to support the onboard gigabit Ethernet MAC.
	  Must be connected to a Broadcom B50610 or B50610M PHY on the motherboard.

config HUDSON_XHCI_FWM_FILE
        string "XHCI firmware path and filename"
        default "3rdparty/southbridge/amd/hudson/xhci.bin" if SOUTHBRIDGE_AMD_AGESA_HUDSON
        default "3rdparty/southbridge/amd/yangtze/xhci.bin" if SOUTHBRIDGE_AMD_AGESA_YANGTZE
	depends on HUDSON_XHCI_FWM

config HUDSON_IMC_FWM_FILE
        string "IMC firmware path and filename"
        default "3rdparty/southbridge/amd/hudson/imc.bin" if SOUTHBRIDGE_AMD_AGESA_HUDSON
        default "3rdparty/southbridge/amd/yangtze/imc.bin" if SOUTHBRIDGE_AMD_AGESA_YANGTZE
	depends on HUDSON_IMC_FWM

config HUDSON_GEC_FWM_FILE
        string "GEC firmware path and filename"
        default "3rdparty/southbridge/amd/hudson/gec.bin"  if SOUTHBRIDGE_AMD_AGESA_HUDSON
        default "3rdparty/southbridge/amd/yangtze/gec.bin"  if SOUTHBRIDGE_AMD_AGESA_YANGTZE
	depends on HUDSON_GEC_FWM

config HUDSON_FWM
	bool
	default y if HUDSON_XHCI_FWM || HUDSON_IMC_FWM || HUDSON_GEC_FWM
	default n if !HUDSON_XHCI_FWM && !HUDSON_IMC_FWM && !HUDSON_GEC_FWM

if HUDSON_FWM

config HUDSON_FWM_POSITION
        hex "Hudson Firmware rom Position"
        default 0xFFF20000 if BOARD_ROMSIZE_KB_1024
        default 0xFFE20000 if BOARD_ROMSIZE_KB_2048
        default 0xFFC20000 if BOARD_ROMSIZE_KB_4096
        default 0xFF820000 if BOARD_ROMSIZE_KB_8192
        default 0xFF020000 if BOARD_ROMSIZE_KB_16384
	help
	  Hudson requires the firmware MUST be located at
	  a specific address (ROM start address + 0x20000), otherwise
	  xhci host Controller can not find or load the xhci firmware.

	  The firmware start address is dependent on the ROM chip size.
	  The default offset is 0x20000 from the ROM start address, namely
	  0xFFF20000 if flash chip size is 1M
	  0xFFE20000 if flash chip size is 2M
	  0xFFC20000 if flash chip size is 4M
	  0xFF820000 if flash chip size is 8M
	  0xFF020000 if flash chip size is 16M
endif # HUDSON_FWM

choice
	prompt "SATA Mode"
	default HUDSON_SATA_IDE
	help
	  Select the mode in which SATA should be driven. NATIVE AHCI, or RAID.
	  The default is NATIVE.

config HUDSON_SATA_IDE
	bool "NATIVE"
	help
	  NATIVE is the default mode and does not require a ROM.

config HUDSON_SATA_RAID
	bool "RAID"
	help
	  HUDSON RAID mode must have the two required ROM files.

config HUDSON_SATA_AHCI
	bool "AHCI"
	help
	  AHCI may work with or without AHCI ROM. It depends on the payload support.
	  For example, seabios does not require the AHCI ROM.

config HUDSON_SATA_LEGACY_IDE
	bool "LEGACY IDE"
	help
	  TODO

config HUDSON_SATA_IDE2AHCI
	bool "IDE to AHCI"
	help
	  TODO

config HUDSON_SATA_AHCI7804
	bool "AHCI7804"
	help
	  AHCI ROM Required, and AMD driver required in the OS.

config HUDSON_SATA_IDE2AHCI7804
	bool "IDE to AHCI7804"
	help
	  AHCI ROM Required, and AMD driver required in the OS.
endchoice

config HUDSON_SATA_MODE
        hex
	depends on (HUDSON_SATA_IDE || HUDSON_SATA_RAID || HUDSON_SATA_AHCI)
	default "0x0" if HUDSON_SATA_IDE
	default "0x1" if HUDSON_SATA_RAID
	default "0x2" if HUDSON_SATA_AHCI
	default "0x3" if HUDSON_SATA_LEGACY_IDE
	default "0x4" if HUDSON_SATA_IDE2AHCI
	default "0x5" if HUDSON_SATA_AHCI7804
	default "0x6" if HUDSON_SATA_IDE2AHCI7804

if HUDSON_SATA_AHCI || HUDSON_SATA_AHCI7804
config AHCI_ROM_ID
	string "AHCI device PCI IDs"
	default "1022,7801" if HUDSON_SATA_AHCI
	default "1022,7804" if HUDSON_SATA_AHCI7804

config HUDSON_AHCI_ROM
	bool "Add a AHCI ROM"

config AHCI_ROM_FILE
	string "AHCI ROM path and filename"
	depends on HUDSON_AHCI_ROM
	default "src/southbridge/amd/agesa/hudson/ahci.bin"
endif # HUDSON_SATA_AHCI || HUDSON_SATA_AHCI7804

if HUDSON_SATA_RAID
config RAID_ROM_ID
	string "RAID device PCI IDs"
	default "1022,7802"
        help
          1022,7802 for SATA NON-RAID5 module, 1022,7803 for SATA RAID5 mode

config RAID_ROM_FILE
	string "RAID ROM path and filename"
	depends on HUDSON_SATA_RAID
	default "src/southbridge/amd/agesa/hudson/raid.bin"

config RAID_MISC_ROM_FILE
        string "RAID Misc ROM path and filename"
        default "src/southbridge/amd/agesa/hudson/misc.bin"
	depends on HUDSON_SATA_RAID

config RAID_MISC_ROM_POSITION
	hex "RAID Misc ROM Position"
	default 0xFFF00000
	depends on HUDSON_SATA_RAID
	help
	  The RAID ROM requires that the MISC ROM is located between the range
	  0xFFF0_0000 to 0xFFF0_FFFF. Also, it must 1K bytes aligned.
	  The CONFIG_ROM_SIZE must larger than 0x100000.
endif # HUDSON_SATA_RAID

config S3_DATA_POS
	hex "S3 volatile storage position"
	default 0xFFFF0000
	depends on HAVE_ACPI_RESUME
	help
	  For a system with S3 feature, the BIOS needs to save some data to
	  non-volatile storage at cold boot stage.

config S3_DATA_SIZE
	int "S3 volatile storage size"
	default 32768
	depends on HAVE_ACPI_RESUME
	help
	  For a system with S3 feature, the BIOS needs to save some data to
	  non-volatile storage at cold boot stage.

config HUDSON_LEGACY_FREE
	bool "System is legacy free"
	help
	  Select y if there is no keyboard controller in the system.
	  This sets variables in AGESA and ACPI.

endif # SOUTHBRIDGE_AMD_AGESA_HUDSON || SOUTHBRIDGE_AMD_AGESA_YANGTZE

if SOUTHBRIDGE_AMD_AGESA_YANGTZE
	config AMD_SB_SPI_TX_LEN
		int
		default 64

	config AZ_PIN
		hex
		default 0xaa
		help
		  bit 1,0 - pin 0
		  bit 3,2 - pin 1
		  bit 5,4 - pin 2
		  bit 7,6 - pin 3
endif