/* * This file is part of the coreboot project. * * Copyright 2014 Rockchip Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include #include #include #include "addressmap.h" #include "grf.h" #include "soc.h" #define RETRY_COUNT 3 /* 100000us = 100ms */ #define I2C_TIMEOUT_US 100000 #define I2C_BUS_MAX 6 #define I2C_NOACK 2 #define I2C_TIMEOUT 3 #define i2c_info(x...) do {if (0) printk(BIOS_DEBUG, x); } while (0) struct rk3288_i2c_regs { u32 i2c_con; u32 i2c_clkdiv; u32 i2c_mrxaddr; u32 i2c_mrxraddr; u32 i2c_mtxcnt; u32 i2c_mrxcnt; u32 i2c_ien; u32 i2c_ipd; u32 i2c_fcnt; u32 reserved0[(0x100 - 0x24) / 4]; u32 txdata[8]; u32 reserved1[(0x200 - 0x120) / 4]; u32 rxdata[8]; }; struct rk3288_i2c_regs *i2c_bus[] = { (struct rk3288_i2c_regs *)0xff650000, (struct rk3288_i2c_regs *)0xff140000, (struct rk3288_i2c_regs *)0xff660000, (struct rk3288_i2c_regs *)0xff150000, (struct rk3288_i2c_regs *)0xff160000, (struct rk3288_i2c_regs *)0xff170000, }; /* Con register bits. */ #define I2C_ACT2NAK (1<<6) #define I2C_NAK (1<<5) #define I2C_STOP (1<<4) #define I2C_START (1<<3) #define I2C_MODE_TX (0<<1) #define I2C_MODE_TRX (1<<1) #define I2C_MODE_RX (2<<1) #define I2C_EN (1<<0) #define I2C_8BIT (1<<24) #define I2C_16BIT (3<<24) #define I2C_24BIT (7<<24) /* Mtxcnt register bits. */ #define I2C_CNT(cnt) ((cnt) & 0x3F) #define I2C_NAKRCVI (1<<6) #define I2C_STOPI (1<<5) #define I2C_STARTI (1<<4) #define I2C_MBRFI (1<<3) #define I2C_MBTFI (1<<2) #define I2C_BRFI (1<<1) #define I2C_BTFI (1<<0) #define I2C_CLEANI 0x7F static int i2c_send_start(struct rk3288_i2c_regs *reg_addr) { int res = 0; int timeout = I2C_TIMEOUT_US; i2c_info("I2c Start::Send Start bit\n"); writel(I2C_CLEANI, ®_addr->i2c_ipd); writel(I2C_EN | I2C_START, ®_addr->i2c_con); while (timeout--) { if (readl(®_addr->i2c_ipd) & I2C_STARTI) break; udelay(1); } if (timeout <= 0) { printk(BIOS_ERR, "I2C Start::Send Start Bit Timeout\n"); res = I2C_TIMEOUT; } return res; } static int i2c_send_stop(struct rk3288_i2c_regs *reg_addr) { int res = 0; int timeout = I2C_TIMEOUT_US; i2c_info("I2c Stop::Send Stop bit\n"); writel(I2C_CLEANI, ®_addr->i2c_ipd); writel(I2C_EN | I2C_STOP, ®_addr->i2c_con); while (timeout--) { if (readl(®_addr->i2c_ipd) & I2C_STOPI) break; udelay(1); } writel(0, ®_addr->i2c_con); if (timeout <= 0) { printk(BIOS_ERR, "I2C Stop::Send Stop Bit Timeout\n"); res = I2C_TIMEOUT; } return res; } static int i2c_read(struct rk3288_i2c_regs *reg_addr, struct i2c_seg segment) { int res = 0; uint8_t *data = segment.buf; int timeout = I2C_TIMEOUT_US; unsigned int bytes_remaining = segment.len; unsigned int bytes_transfered = 0; unsigned int words_transfered = 0; unsigned int rxdata = 0; unsigned int con = 0; unsigned int i, j; writel(I2C_8BIT | segment.chip << 1 | 1, ®_addr->i2c_mrxaddr); writel(0, ®_addr->i2c_mrxraddr); con = I2C_MODE_TRX | I2C_EN; while (bytes_remaining) { bytes_transfered = MIN(bytes_remaining, 32); bytes_remaining -= bytes_transfered; if (!bytes_remaining) con |= I2C_EN | I2C_NAK; words_transfered = ALIGN_UP(bytes_transfered, 4) / 4; writel(I2C_CLEANI, ®_addr->i2c_ipd); writel(con, ®_addr->i2c_con); writel(bytes_transfered, ®_addr->i2c_mrxcnt); timeout = I2C_TIMEOUT_US; while (timeout--) { if (readl(®_addr->i2c_ipd) & I2C_NAKRCVI) { writel(0, ®_addr->i2c_mrxcnt); writel(0, ®_addr->i2c_con); return I2C_NOACK; } if (readl(®_addr->i2c_ipd) & I2C_MBRFI) break; udelay(1); } if (timeout <= 0) { printk(BIOS_ERR, "I2C Read::Recv Data Timeout\n"); writel(0, ®_addr->i2c_mrxcnt); writel(0, ®_addr->i2c_con); return I2C_TIMEOUT; } for (i = 0; i < words_transfered; i++) { rxdata = readl(®_addr->rxdata[i]); i2c_info("I2c Read::RXDATA[%d] = 0x%x\n", i, rxdata); for (j = 0; j < 4; j++) { if ((i * 4 + j) == bytes_transfered) break; *data++ = (rxdata >> (j * 8)) & 0xff; } } con = I2C_MODE_RX | I2C_EN; } return res; } static int i2c_write(struct rk3288_i2c_regs *reg_addr, struct i2c_seg segment) { int res = 0; uint8_t *data = segment.buf; int timeout = I2C_TIMEOUT_US; int bytes_remaining = segment.len + 1; int bytes_transfered = 0; int words_transfered = 0; unsigned int i; unsigned int j = 1; u32 txdata = 0; txdata |= (segment.chip << 1); while (bytes_remaining) { bytes_transfered = MIN(bytes_remaining, 32); words_transfered = ALIGN_UP(bytes_transfered, 4) / 4; for (i = 0; i < words_transfered; i++) { do { if ((i * 4 + j) == bytes_transfered) break; txdata |= (*data++) << (j * 8); } while (++j < 4); writel(txdata, ®_addr->txdata[i]); j = 0; i2c_info("I2c Write::TXDATA[%d] = 0x%x\n", i, txdata); txdata = 0; } writel(I2C_CLEANI, ®_addr->i2c_ipd); writel(I2C_EN | I2C_MODE_TX, ®_addr->i2c_con); writel(bytes_transfered, ®_addr->i2c_mtxcnt); timeout = I2C_TIMEOUT_US; while (timeout--) { if (readl(®_addr->i2c_ipd) & I2C_NAKRCVI) { writel(0, ®_addr->i2c_mtxcnt); writel(0, ®_addr->i2c_con); return I2C_NOACK; } if (readl(®_addr->i2c_ipd) & I2C_MBTFI) break; udelay(1); } if (timeout <= 0) { printk(BIOS_ERR, "I2C Write::Send Data Timeout\n"); writel(0, ®_addr->i2c_mtxcnt); writel(0, ®_addr->i2c_con); return I2C_TIMEOUT; } bytes_remaining -= bytes_transfered; } return res; } static int i2c_do_xfer(void *reg_addr, struct i2c_seg segment) { int res = 0; if (i2c_send_start(reg_addr)) return I2C_TIMEOUT; if (segment.read) res = i2c_read(reg_addr, segment); else res = i2c_write(reg_addr, segment); return i2c_send_stop(reg_addr) || res; } int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int seg_count) { int i; int res = 0; struct rk3288_i2c_regs *regs = i2c_bus[bus]; struct i2c_seg *seg = segments; for (i = 0; i < seg_count; i++, seg++) { res = i2c_do_xfer(regs, *seg); if (res) break; } return res; }