config SOC_NVIDIA_TEGRA132
	bool
	default n
	select ARCH_BOOTBLOCK_ARMV4
	select ARCH_VERSTAGE_ARMV4
	select ARCH_ROMSTAGE_ARMV4
	select ARCH_RAMSTAGE_ARMV8_64
	select ARM64_CPUS_START_IN_EL3
	select DYNAMIC_CBMEM
	select BOOTBLOCK_CONSOLE
	select HAVE_MONOTONIC_TIMER
	select HAVE_HARD_RESET
	select HAVE_UART_SPECIAL
	select HAVE_UART_MEMORY_MAPPED
	select EARLY_CONSOLE
	select ARM_BOOTBLOCK_CUSTOM

if SOC_NVIDIA_TEGRA132

config BOOTBLOCK_CPU_INIT
	string
	default "soc/nvidia/tegra132/bootblock.c"
	help
	  CPU/SoC-specific bootblock code. This is useful if the
	  bootblock must load microcode or copy data from ROM before
	  searching for the bootblock.

config BOOTBLOCK_ROM_OFFSET
	hex
	default 0x0

config MAX_CPUS
	int
	default 2

config CBFS_HEADER_ROM_OFFSET
	hex "offset of master CBFS header in ROM"
	default 0x40000

config CBFS_ROM_OFFSET
	hex "offset of CBFS data in ROM"
	default 0x40080

config BOOTBLOCK_BASE
	hex
	default 0x40020000

config ROMSTAGE_BASE
	hex
	default 0x40025000

config SYS_SDRAM_BASE
	hex
	default 0x80000000

config RAMSTAGE_BASE
	hex
	default 0x80200000

config BOOTBLOCK_STACK_TOP
	hex
	default 0x40020000

config BOOTBLOCK_STACK_BOTTOM
	hex
	default 0x4001c000

config ROMSTAGE_STACK_TOP
	hex
	default 0x40020000

config ROMSTAGE_STACK_BOTTOM
	hex
	default 0x4001c000

config CBFS_CACHE_ADDRESS
	hex "memory address to put CBFS cache data"
	default 0x40006000

config CBFS_CACHE_SIZE
	hex "size of CBFS cache data"
	default 0x00016000

config CONSOLE_PRERAM_BUFFER_BASE
	hex "memory address of the CBMEM console buffer"
	default 0x40004020

config MTS_DIRECTORY
	string "Directory where MTS microcode files are located"
	default "3rdparty/cpu/nvidia/tegra132/current/prod"
	help
	  Path to directory where MTS microcode files are located.

config TRUSTZONE_CARVEOUT_SIZE_MB
	hex "Size of Trust Zone region"
	default 0x4
	help
	  Size of Trust Zone area in MiB to reserve in memory map.

config BOOTROM_SDRAM_INIT
	bool "SoC BootROM does SDRAM init with full BCT"
	default n
	help
	  Use during Ryu LPDDR3 bringup

# Default to 700MHz. This value is based on nv bootloader setting.
config PLLX_KHZ
	int
	default 700000
endif