/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define PCIE_SETTING_REG 0x80 #define PCIE_PCI_IDS_1 0x9c #define PCI_CLASS(class) ((class) << 8) #define PCIE_RC_MODE BIT(0) #define PCIE_CFGNUM_REG 0x140 #define PCIE_CFG_DEVFN(devfn) ((devfn) & GENMASK(7, 0)) #define PCIE_CFG_BUS(bus) (((bus) << 8) & GENMASK(15, 8)) #define PCIE_CFG_OFFSET_ADDR 0x1000 #define PCIE_CFG_HEADER(bus, devfn) \ (PCIE_CFG_BUS(bus) | PCIE_CFG_DEVFN(devfn)) #define PCIE_RST_CTRL_REG 0x148 #define PCIE_MAC_RSTB BIT(0) #define PCIE_PHY_RSTB BIT(1) #define PCIE_BRG_RSTB BIT(2) #define PCIE_PE_RSTB BIT(3) #define PCIE_LTSSM_STATUS_REG 0x150 #define PCIE_LTSSM_STATE(val) (((val) >> 24) & 0x1f) #define PCIE_LINK_STATUS_REG 0x154 #define PCIE_CTRL_LINKUP BIT(8) #define PCI_NUM_INTX 4 #define PCIE_INT_ENABLE_REG 0x180 #define PCIE_INTX_SHIFT 24 #define PCIE_INTX_ENABLE \ GENMASK(PCIE_INTX_SHIFT + PCI_NUM_INTX - 1, PCIE_INTX_SHIFT) #define PCIE_TRANS_TABLE_BASE_REG 0x800 #define PCIE_ATR_SRC_ADDR_MSB_OFFSET 0x4 #define PCIE_ATR_TRSL_ADDR_LSB_OFFSET 0x8 #define PCIE_ATR_TRSL_ADDR_MSB_OFFSET 0xc #define PCIE_ATR_TRSL_PARAM_OFFSET 0x10 #define PCIE_ATR_TLB_SET_OFFSET 0x20 #define PCIE_MAX_TRANS_TABLES 8 #define PCIE_ATR_EN BIT(0) #define PCIE_ATR_SIZE(size) \ (((((size) - 1) << 1) & GENMASK(6, 1)) | PCIE_ATR_EN) #define PCIE_ATR_ID(id) ((id) & GENMASK(3, 0)) #define PCIE_ATR_TYPE_MEM PCIE_ATR_ID(0) #define PCIE_ATR_TYPE_IO PCIE_ATR_ID(1) #define PCIE_ATR_TLP_TYPE(type) (((type) << 16) & GENMASK(18, 16)) #define PCIE_ATR_TLP_TYPE_MEM PCIE_ATR_TLP_TYPE(0) #define PCIE_ATR_TLP_TYPE_IO PCIE_ATR_TLP_TYPE(2) /* LTSSM state in PCIE_LTSSM_STATUS_REG bit[28:24] */ static const char *const ltssm_str[] = { "detect.quiet", /* 0x00 */ "detect.active", /* 0x01 */ "polling.active", /* 0x02 */ "polling.compliance", /* 0x03 */ "polling.configuration", /* 0x04 */ "config.linkwidthstart", /* 0x05 */ "config.linkwidthaccept", /* 0x06 */ "config.lanenumwait", /* 0x07 */ "config.lanenumaccept", /* 0x08 */ "config.complete", /* 0x09 */ "config.idle", /* 0x0A */ "recovery.receiverlock", /* 0x0B */ "recovery.equalization", /* 0x0C */ "recovery.speed", /* 0x0D */ "recovery.receiverconfig", /* 0x0E */ "recovery.idle", /* 0x0F */ "L0", /* 0x10 */ "L0s", /* 0x11 */ "L1.entry", /* 0x12 */ "L1.idle", /* 0x13 */ "L2.idle", /* 0x14 */ "L2.transmitwake", /* 0x15 */ "disable", /* 0x16 */ "loopback.entry", /* 0x17 */ "loopback.active", /* 0x18 */ "loopback.exit", /* 0x19 */ "hotreset", /* 0x1A */ }; static uintptr_t mtk_pcie_get_controller_base(pci_devfn_t devfn) { struct device *root_dev; const mtk_soc_config_t *config; static uintptr_t base = 0; if (!base) { root_dev = pcidev_path_on_root(devfn); config = config_of(root_dev); base = config->pcie_config.base; } return base; } volatile union pci_bank *pci_map_bus(pci_devfn_t dev) { u32 val, devfn, bus; uintptr_t base; devfn = PCI_DEV2DEVFN(dev); bus = PCI_DEV2SEGBUS(dev); val = PCIE_CFG_HEADER(bus, devfn); base = mtk_pcie_get_controller_base(dev); write32p(base + PCIE_CFGNUM_REG, val); return (void *)(base + PCIE_CFG_OFFSET_ADDR); } static int mtk_pcie_set_trans_window(struct device *dev, uintptr_t table, const struct mtk_pcie_mmio_res *mmio_res) { const char *range_type; uint32_t table_attr; if (!mmio_res) return -1; if (mmio_res->type == IORESOURCE_IO) { range_type = "IO"; table_attr = PCIE_ATR_TYPE_IO | PCIE_ATR_TLP_TYPE_IO; } else if (mmio_res->type == IORESOURCE_MEM) { range_type = "MEM"; table_attr = PCIE_ATR_TYPE_MEM | PCIE_ATR_TLP_TYPE_MEM; } else { printk(BIOS_ERR, "%s: Unknown trans table type %#lx\n", __func__, mmio_res->type); return -1; } write32p(table, mmio_res->cpu_addr | PCIE_ATR_SIZE(__fls(mmio_res->size))); write32p(table + PCIE_ATR_SRC_ADDR_MSB_OFFSET, 0); write32p(table + PCIE_ATR_TRSL_ADDR_LSB_OFFSET, mmio_res->pci_addr); write32p(table + PCIE_ATR_TRSL_ADDR_MSB_OFFSET, 0); write32p(table + PCIE_ATR_TRSL_PARAM_OFFSET, table_attr); printk(BIOS_INFO, "%s: set %s trans window: cpu_addr = %#x, pci_addr = %#x, size = %#x\n", __func__, range_type, mmio_res->cpu_addr, mmio_res->pci_addr, mmio_res->size); return 0; } static void mtk_pcie_domain_new_res(struct device *dev, unsigned int index, const struct mtk_pcie_mmio_res *mmio_res) { struct resource *res; if (!mmio_res) return; res = new_resource(dev, index); res->base = mmio_res->cpu_addr; res->limit = mmio_res->cpu_addr + mmio_res->size - 1; res->flags = mmio_res->type | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; } void mtk_pcie_domain_read_resources(struct device *dev) { const mtk_soc_config_t *config = config_of(dev); const struct mtk_pcie_config *conf = &config->pcie_config; mtk_pcie_domain_new_res(dev, IOINDEX_SUBTRACTIVE(0, 0), &conf->mmio_res_io); mtk_pcie_domain_new_res(dev, IOINDEX_SUBTRACTIVE(1, 0), &conf->mmio_res_mem); } void mtk_pcie_domain_set_resources(struct device *dev) { const mtk_soc_config_t *config = config_of(dev); const struct mtk_pcie_config *conf = &config->pcie_config; uintptr_t table; /* Initialize I/O space constraints. */ table = conf->base + PCIE_TRANS_TABLE_BASE_REG; if (mtk_pcie_set_trans_window(dev, table, &conf->mmio_res_io) < 0) printk(BIOS_ERR, "%s: Failed to set IO window\n", __func__); /* Initialize memory resources constraints. */ table = conf->base + PCIE_TRANS_TABLE_BASE_REG + PCIE_ATR_TLB_SET_OFFSET; if (mtk_pcie_set_trans_window(dev, table, &conf->mmio_res_mem) < 0) printk(BIOS_ERR, "%s: Failed to set MEM window\n", __func__); pci_domain_set_resources(dev); } void mtk_pcie_domain_enable(struct device *dev) { const mtk_soc_config_t *config = config_of(dev); const struct mtk_pcie_config *conf = &config->pcie_config; const char *ltssm_state; long perst_time_us; size_t tries = 0; uint32_t val; /* Set as RC mode */ val = read32p(conf->base + PCIE_SETTING_REG); val |= PCIE_RC_MODE; write32p(conf->base + PCIE_SETTING_REG, val); /* Set class code */ val = read32p(conf->base + PCIE_PCI_IDS_1); val &= ~GENMASK(31, 8); val |= PCI_CLASS(PCI_CLASS_BRIDGE_PCI << 8); write32p(conf->base + PCIE_PCI_IDS_1, val); /* Mask all INTx interrupts */ val = read32p(conf->base + PCIE_INT_ENABLE_REG); val &= ~PCIE_INTX_ENABLE; write32p(conf->base + PCIE_INT_ENABLE_REG, val); perst_time_us = early_init_get_elapsed_time_us(EARLY_INIT_PCIE); printk(BIOS_DEBUG, "%s: %ld us elapsed since assert PERST#\n", __func__, perst_time_us); /* * Described in PCIe CEM specification sections 2.2 * (PERST# Signal) and 2.2.1 (Initial Power-Up (G3 to S0)). * The deassertion of PERST# should be delayed 100ms (TPVPERL) * for the power and clock to become stable. */ const long min_perst_time_us = 100000; /* 100 ms */ if (perst_time_us < min_perst_time_us) { if (!perst_time_us) { printk(BIOS_WARNING, "%s: PCIe early init data not found, sleeping 100ms\n", __func__); mtk_pcie_reset(conf->base + PCIE_RST_CTRL_REG, true); } else { printk(BIOS_WARNING, "%s: Need an extra %ld us delay to meet PERST# deassertion requirement\n", __func__, min_perst_time_us - perst_time_us); } udelay(min_perst_time_us - perst_time_us); } /* De-assert reset signals */ mtk_pcie_reset(conf->base + PCIE_RST_CTRL_REG, false); if (!retry(100, (tries++, read32p(conf->base + PCIE_LINK_STATUS_REG) & PCIE_CTRL_LINKUP), mdelay(1))) { val = read32p(conf->base + PCIE_LTSSM_STATUS_REG); ltssm_state = PCIE_LTSSM_STATE(val) >= ARRAY_SIZE(ltssm_str) ? "Unknown state" : ltssm_str[PCIE_LTSSM_STATE(val)]; printk(BIOS_ERR, "%s: PCIe link down, current ltssm state: %s\n", __func__, ltssm_state); return; } printk(BIOS_INFO, "%s: PCIe link up success (%ld tries)\n", __func__, tries); }